Old front panel files

Discussion and support for users and builders of Oakley Sound musical products.

Moderators: Kent, infradead, Synthbuilder

Post Reply
User avatar
terjewinther
Common Wiggler
Posts: 197
Joined: Wed Sep 02, 2009 1:51 am
Location: Norway

Old front panel files

Post by terjewinther » Sat Mar 02, 2019 12:01 pm

I am very grateful for the Legacy support page on the Oakley web page, because I have a lot of old modules.
However, I now need some old front panel files - the .fpd files.
What is the best way to get hold of them?

User avatar
Synthbuilder
Super Deluxe Wiggler
Posts: 2821
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Post by Synthbuilder » Sun Mar 03, 2019 5:00 am

What panel designs do you need? I may have some of the old designs around somewhere. Not many though.

Tony

User avatar
terjewinther
Common Wiggler
Posts: 197
Joined: Wed Sep 02, 2009 1:51 am
Location: Norway

Post by terjewinther » Tue Mar 05, 2019 5:05 pm

The old VC-Mixer iss. 1.

User avatar
Synthbuilder
Super Deluxe Wiggler
Posts: 2821
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Post by Synthbuilder » Wed Mar 06, 2019 3:16 am

I thought I didn't have those but they are actually still on the website but with no active links from the web pages:

http://www.oakleysound.com/vcmix.fpd

http://www.oakleysound.com/vcmix2.fpd

Do check them though - I did some odd things back then with the mounting holes. Fine if you are mounting them on wooden battens not so good if you are using metal MOTM rack rails.

Tony

User avatar
terjewinther
Common Wiggler
Posts: 197
Joined: Wed Sep 02, 2009 1:51 am
Location: Norway

Post by terjewinther » Fri Mar 08, 2019 5:36 pm

Great - thanks!
I am mounting in a wooden cabinet, so all fine.

Post Reply

Return to “Oakley Sound Systems”