Introducing ADDAC803 Quadraphonic Spatializer

New Interfaces for Analog Synthesizers.

Moderators: Kent, infradead, __ag

User avatar
__ag
Wiggling with Experience
Posts: 287
Joined: Thu Feb 18, 2010 5:17 pm
Location: Portugal

Post by __ag » Tue Sep 11, 2012 3:53 pm

Hello all,
sorry for the delay, will now try to reply to all questions below.

1. cv outs 1-4, xy out and filter +- outs
All these are CV outputs of the algorithm.
CV outs 1-4 are the outputs used to control the 4 VCA's
XY CV out is the output of the sound positioning in cartesian coordinates, which are a mirror of the xy inputs in the cartesian mode but different when in Polar mode.
filter +- outs are CV outputs that on spatialization algorithms are used to add reverb or low pass when the sound get further away from the center.
it's close to what bjorn mentions but the best way to do it is to send the audio source to be spatialized through a a VC reverb or LPF before feeding it to the audio and using the Filter +- to control the wet dry of the effect.
the - output is proportional inverted to the + output.


2. 1/8 jacks and 1/4 jack are mirrored outputs so they send out the same audio but the 1/4 jacks makes it easier to plug straight to audio mixers or speakers.

3. a manual will come out closer to the final release date as well as more info.

i hope i was clear!

all the very best
andre


User avatar
Paranormal Patroler
Super Deluxe Wiggler
Posts: 10676
Joined: Tue Aug 30, 2011 3:40 pm
Location: the Terminal beach

Post by Paranormal Patroler » Wed Sep 12, 2012 3:09 pm

14HP according to my calculations.
All rights reserved; all wrongs reversed.

User avatar
moonkid
Common Wiggler
Posts: 65
Joined: Fri Jun 15, 2012 8:16 am
Location: Baltimore, MD

Post by moonkid » Sat Jan 19, 2013 2:56 pm

uhhhhhh has anyone received their beta version yet?

:despair:

User avatar
Paranormal Patroler
Super Deluxe Wiggler
Posts: 10676
Joined: Tue Aug 30, 2011 3:40 pm
Location: the Terminal beach

Post by Paranormal Patroler » Sun Jan 20, 2013 6:06 am

No, not yet.
All rights reserved; all wrongs reversed.

User avatar
Phetus
Wiggling with Experience
Posts: 292
Joined: Mon Mar 04, 2013 4:33 pm
Location: Berlin

Post by Phetus » Thu May 02, 2013 12:42 pm

Hi Andre, really want to get one of these, but right now financial I can't, however I have a question. Theoretically, would it be possible to make an expansion module to make it octaphonic? So, add z modulation as well as x & y?

Could be cool to have an octaphonic 803 connected to marble physics... Oh man, now I need 8 speakers...

Edit: marble physics is only x & y too, I seemed to have imagined it was a ball bouncing in a 3d space. Another expansion module? :tu:

User avatar
Orbless
Super Deluxe Wiggler
Posts: 1202
Joined: Wed Jan 12, 2011 2:57 pm
Location: San Francisco, CA

Post by Orbless » Sun Jun 02, 2013 12:21 pm

Is there a manual yet for this module? I just got my hands on one and want to get it all sorted quickly.
Been great so far!

User avatar
thundermouse
Wiggling with Experience
Posts: 315
Joined: Sun Jun 30, 2013 1:03 pm
Location: Akron, Ohio
Contact:

Post by thundermouse » Tue Jul 30, 2013 7:05 am

this is melting my face with awesome.

hermes
Common Wiggler
Posts: 126
Joined: Tue Sep 06, 2011 3:53 am

Post by hermes » Tue Oct 01, 2013 7:51 pm

I saw manual with animation
just kick ass as hell!
great module i am sure i will work with it sooner or latter
thanks!

User avatar
KNYST
hiding in the forest
Posts: 2913
Joined: Mon Jan 26, 2009 10:09 am
Location: the Taiga, Sweden

Post by KNYST » Mon Nov 18, 2013 5:58 am

Andre (or anyone else), what is the current draw on this thing?

Soon, it will be enriching my patches :cloud:
NOISE HEALS.
patch responsibly.
LISTEN | WATCH

User avatar
Paranormal Patroler
Super Deluxe Wiggler
Posts: 10676
Joined: Tue Aug 30, 2011 3:40 pm
Location: the Terminal beach

Post by Paranormal Patroler » Mon Nov 18, 2013 6:04 am

So jealous! :mrgreen:
All rights reserved; all wrongs reversed.

User avatar
ADDAC System
Common Wiggler
Posts: 219
Joined: Sun Oct 06, 2013 12:39 pm
Location: Lisbon, Portugal
Contact:

Post by ADDAC System » Wed Nov 20, 2013 2:38 pm

KNYST wrote:Andre (or anyone else), what is the current draw on this thing?
Hi!

This module draws around 150mA on the posivtive raill and 100mA on the negative raill.

All the best,
Addac Team
Questions? Assistance? Hit me up via PM or send us an email!

ADDAC System | [www.addacsystem.com]

User avatar
KNYST
hiding in the forest
Posts: 2913
Joined: Mon Jan 26, 2009 10:09 am
Location: the Taiga, Sweden

Post by KNYST » Wed Nov 20, 2013 4:01 pm

:guinness:

Added to modular grid :tu:
NOISE HEALS.
patch responsibly.
LISTEN | WATCH

User avatar
Paranormal Patroler
Super Deluxe Wiggler
Posts: 10676
Joined: Tue Aug 30, 2011 3:40 pm
Location: the Terminal beach

Post by Paranormal Patroler » Fri Jan 31, 2014 9:20 am

I purchased a second pair of monitors, so I'm officially on the prowl for one of these :hihi:
All rights reserved; all wrongs reversed.

User avatar
__ag
Wiggling with Experience
Posts: 287
Joined: Thu Feb 18, 2010 5:17 pm
Location: Portugal

Post by __ag » Tue May 19, 2015 12:06 pm

Hello all,

Brief post to announce new videos for the 803!

all the very best
andre

Part 1:
[video][/video]

Part 2:
[video][/video]

Webpage:
http://addacsystem.com/product/addac800 ... patializer

User avatar
Paranormal Patroler
Super Deluxe Wiggler
Posts: 10676
Joined: Tue Aug 30, 2011 3:40 pm
Location: the Terminal beach

Post by Paranormal Patroler » Tue May 19, 2015 12:08 pm

I hope these don't run scarce again! :hyper:
All rights reserved; all wrongs reversed.

User avatar
KNYST
hiding in the forest
Posts: 2913
Joined: Mon Jan 26, 2009 10:09 am
Location: the Taiga, Sweden

Post by KNYST » Thu May 21, 2015 6:19 am

Thanks Andre - nice examples :tu:

(still love my 803)
NOISE HEALS.
patch responsibly.
LISTEN | WATCH

User avatar
Quasi
Common Wiggler
Posts: 128
Joined: Fri Feb 14, 2014 2:16 am
Location: Seattle

Post by Quasi » Sat May 30, 2015 7:49 pm

I've got one coming to me and can't wait to try it out. So amazingly useful.

User avatar
Quasi
Common Wiggler
Posts: 128
Joined: Fri Feb 14, 2014 2:16 am
Location: Seattle

Post by Quasi » Sat Jun 13, 2015 10:51 am

The 803 arrived and it's every bit as wonderful as I'd hoped. For me it will take a while to sculpt sound using the 803 as it's a powerful new layer to add to my imagination. Anyone have any examples to share?

Laurent G.
Learning to Wiggle
Posts: 12
Joined: Tue Apr 03, 2012 8:17 pm

Post by Laurent G. » Mon Apr 04, 2016 8:31 am

I discover Addac more and more and thoses products fill my needs. My bank account bleed.

lucringeisen
Common Wiggler
Posts: 57
Joined: Wed Dec 18, 2013 11:48 am

helppp please !

Post by lucringeisen » Sat Jun 29, 2019 5:18 am

__ag wrote: filter +- outs are CV outputs that on spatialization algorithms are used to add reverb or low pass when the sound get further away from the center.
it's close to what bjorn mentions but the best way to do it is to send the audio source to be spatialized through a a VC reverb or LPF before feeding it to the audio and using the Filter +- to control the wet dry of the effect.
the - output is proportional inverted to the + output.
Hi, please could you help me finding out what I am doing wrong (or is it the device...), thing is I was expecting as described here that the filter would close and reverb open when the sound gets further away from the center, but what actually happens is that it works as it should when moving away from the center on one side, but when moving away from center toward the opposite side the reverb stays fully closed and LP filter keeps on opening. resuming, I get contrary effects when moving away from center depending toward which direction it is moving, but I was expecting the same things to happen no matter which direction as long as it is moving away from center. please help !! thanks, Luc

lucringeisen
Common Wiggler
Posts: 57
Joined: Wed Dec 18, 2013 11:48 am

Re: helppp please !

Post by lucringeisen » Fri Jul 05, 2019 3:44 am

lucringeisen wrote:
__ag wrote: filter +- outs are CV outputs that on spatialization algorithms are used to add reverb or low pass when the sound get further away from the center.
it's close to what bjorn mentions but the best way to do it is to send the audio source to be spatialized through a a VC reverb or LPF before feeding it to the audio and using the Filter +- to control the wet dry of the effect.
the - output is proportional inverted to the + output.
Hi, please could you help me finding out what I am doing wrong (or is it the device...), thing is I was expecting as described here that the filter would close and reverb open when the sound gets further away from the center, but what actually happens is that it works as it should when moving away from the center on one side, but when moving away from center toward the opposite side the reverb stays fully closed and LP filter keeps on opening. resuming, I get contrary effects when moving away from center depending toward which direction it is moving, but I was expecting the same things to happen no matter which direction as long as it is moving away from center. please help !! thanks, Luc
Can anyone help ? did someone notice the same issue ? thanks !

lucringeisen
Common Wiggler
Posts: 57
Joined: Wed Dec 18, 2013 11:48 am

Post by lucringeisen » Fri Jul 05, 2019 4:15 am

Also, is AUDIO IN 2 just summing with AUDIO IN 1 ? or are they treated as a stereo input ?

Post Reply

Return to “ADDAC System”