DAY 7: Ultra .WAV Player

New Interfaces for Analog Synthesizers.

Moderators: Kent, infradead, __ag

Post Reply
User avatar
nedrush
Common Wiggler
Posts: 199
Joined: Fri Sep 09, 2016 10:35 am
Location: UK

Post by nedrush » Sat Aug 26, 2017 4:01 pm

ADDAC System wrote:
nedrush wrote:I've checked the manual. My unit seems a little buggy in places. It may be because it's from a previous owner. Something don't work as described. I wondered if there was a way to reset the firmware or factory settings.
Hi nedrush, would you please be so kind as to send another email to addac@addacsystem.com ? They'll help you out.
Ok. I've sent an email. Thanks.

User avatar
ADDAC System
Common Wiggler
Posts: 219
Joined: Sun Oct 06, 2013 12:39 pm
Location: Lisbon, Portugal
Contact:

Post by ADDAC System » Sun Feb 11, 2018 2:43 pm

We have a new firmware on the loose!And while on these we also offer a significant price drop in BOTH modules!

The pdf below features all info regarding upgrading the ADDAC101 and ADDAC111 Module, including necessary hardware, physical connections and download links.

ADDACSystem .WAV Players Firmware Update Guide:
http://media.addacsystem.com/firmwares/ ... _Guide.pdf


Last update version:
ADDAC111: E0, February 5th, 2018


Changes Log:
.On OSX no need to eject the card through a special App.
- Files still need to be named as before.
.Small correction regarding synchronization when triggering a file.

.ADDAC111 now supports up to 72 files.
Questions? Assistance? Hit me up via PM or send us an email!

ADDAC System | [www.addacsystem.com]

User avatar
groovar
Common Wiggler
Posts: 89
Joined: Mon Sep 19, 2016 12:11 pm

Manual / start point

Post by groovar » Tue Oct 09, 2018 10:43 pm

I’m sorry if my brain is failing I’m having a hard time understanding this line:

“If the loop size is set for 1/4 of the sample, then the start point will only be available from 0 to 3/4 of the file”

Is that supposed to say zero to 1/4 of the file?

User avatar
groovar
Common Wiggler
Posts: 89
Joined: Mon Sep 19, 2016 12:11 pm

Post by groovar » Mon Oct 15, 2018 1:19 pm

still trying to grok this

User avatar
tom moody
Common Wiggler
Posts: 66
Joined: Mon Oct 24, 2011 1:57 am
Contact:

Post by tom moody » Thu Oct 25, 2018 9:38 pm

Yes, I think they mean 1/4. The loop and start knobs are interdependent, so as you change one you are usually fiddling with the other. Eventually you find a comfort zone for each sound (ideally with the start knob at a zero-crossing point so you avoid pops or clicks).

User avatar
groovar
Common Wiggler
Posts: 89
Joined: Mon Sep 19, 2016 12:11 pm

Post by groovar » Fri Oct 26, 2018 12:58 am

I think I was able to figure this out (although still wrestling with the SD cards to actual play a sample I can test)

By “start point” they mean specifically the start point of the loop, not the sample. So if the loop is 1/4 the size, the start point of the LOOP can only move down the sample 1-3/4 until it hits the end of the sample (because the loop is 1/4)

I actually had to see this drawn out and animated for it to click, the manual language was just a bit tricky

Still having a very hard time with the card formatting, making progress, hope to have it solved tomorrow

Post Reply

Return to “ADDAC System”