addac101

New Interfaces for Analog Synthesizers.

Moderators: Kent, infradead, __ag

Post Reply
User avatar
twospartans
Common Wiggler
Posts: 198
Joined: Wed Feb 08, 2012 2:57 pm
Location: philadelphia, pa

addac101

Post by twospartans » Sun Feb 10, 2013 11:25 pm

anyone out there have[have had?]
extremely curious about it.

any gripes, comments, etc?

User avatar
ws9848
Super Deluxe Wiggler
Posts: 1037
Joined: Fri Feb 04, 2011 1:20 am
Location: Sacramento, CA

Post by ws9848 » Mon Feb 11, 2013 5:30 pm

I have one. I like it!

User avatar
taylor12k
Ultra Wiggler
Posts: 974
Joined: Sun Feb 13, 2011 2:35 pm
Location: pound ridge, ny

Post by taylor12k » Tue Mar 12, 2013 9:38 am

i have one and in many ways its the centerpiece of my system. to be able to integrate samples from acoustic instruments, other hardware synths, or from my albums into the modular world is very important.

the 101 does exactly what it advertises and works quite well.

the VC looping and playback positioning is great. my only minor gripe is the pitch adjustment system which has artifacts when in knob mode.. but if you find your pitch and then stick it in CV mode it sounds fine.

i believe there is a workaround with jumpers on the back, but i haven't looked into that yet.

i'll probably eventually get another!

mafouka
Wiggling with Experience
Posts: 398
Joined: Mon Dec 12, 2011 9:26 pm
Location: CA

Post by mafouka » Tue Mar 12, 2013 1:53 pm

do it already

User avatar
mapmap
Wiggling with Experience
Posts: 429
Joined: Thu Feb 09, 2012 4:09 pm
Location: portland, or

Post by mapmap » Sat Apr 06, 2013 11:24 pm

i have one too.
it is pretty damn great.

User avatar
knifey
Wiggling with Experience
Posts: 423
Joined: Mon Apr 27, 2015 4:06 pm

Post by knifey » Fri Apr 08, 2016 4:21 pm

Reviving this ancient thread, as I'm curious about the workaround for the pitch adjustment. When I switch from CV back to manual control of the pitch, the sample doesn't seem to play back at the original pitch. And, I haven't been able to figure out the knob position for getting the sample back at original pitch.

I just read the Jumper Hack section of the website but it's a bit confusing to me. If anyone has some insight it would really help. I'm loving the module except for the pitch-shifting part. I LOVE the envelope follower output as I use that signal to hold/freeze my sequencer in random spots depending on the sample triggered.
taylor12k wrote:i have one and in many ways its the centerpiece of my system. to be able to integrate samples from acoustic instruments, other hardware synths, or from my albums into the modular world is very important.

the 101 does exactly what it advertises and works quite well.

the VC looping and playback positioning is great. my only minor gripe is the pitch adjustment system which has artifacts when in knob mode.. but if you find your pitch and then stick it in CV mode it sounds fine.

i believe there is a workaround with jumpers on the back, but i haven't looked into that yet.

i'll probably eventually get another!

Post Reply

Return to “ADDAC System”