| View previous topic :: View next topic |
| Author |
Envelator |
arnoux
Ultra Wiggler
Joined: 02 Oct 2011
Last Visit: 22 May 2013
Posts: 949
Location: Italy
|
 Posted: Mon Mar 19, 2012 10:33 am Post subject: Envelator |
  |
|
|
From Schneiders in Berlin: THE MODULE IS TEMPORARILY OUT OF PRODUCTION 
Nobody knows if it's just a matter of time? Or need I to find it in the sell/trade subforum?
Another question, I already own a Doepfer quadADSR but I'm intrigued by this module, better buy 2 in any case?
_________________
WTB: TTA HEK + uZEUS, black version - Doepfer A-199 - C'MON SELL ME YOUR Make Noise Function YOU DON'T NEED IT YOU'VE GOT ALREADY A MATHS!  |
|
| Back to top |
|
 |
slow_riot
Super Deluxe Wiggler
Joined: 30 Jun 2009
Last Visit: 21 May 2013
Posts: 1906
Location: uk
|
| Posted: Mon Mar 19, 2012 10:43 am Post subject: |
|
|
|
the envelator is fanatastic, especially in a pair.
I can't talk on behalf of Malekko but I imagine that the module is being tweaked to correct the Dmod vulnerability issue, and the fact that the fix previously offered affects the Dmod normalisation, which is documented in several threads. |
|
| Back to top |
|
|
melodydad
Muffuselah
Joined: 17 Mar 2011
Last Visit: 22 May 2013
Posts: 337
Location: Cambridgeshire, UK
|
| Posted: Mon Mar 19, 2012 10:47 am Post subject: |
|
|
|
I have 2 x A-140's and then I bought an Envelator and I use both - but always seem to go to the Envelator first although I wouldn't get rid of the A-140's though - I use both of these extensively).
It is A/D and A/R but also has some neat tricks if you read the 'manual' (see Malekko forum - tons of stuff on this). .
If they were available - and if I had any space left - I would certainly go for a second one. . . 
_________________
. . . we better let him in . . . . . he's got a Theremin . . . (HMHB: 'Look Dad No Tunes') |
|
| Back to top |
|
|
arnoux
Ultra Wiggler
Joined: 02 Oct 2011
Last Visit: 22 May 2013
Posts: 949
Location: Italy
|
| Posted: Mon Mar 19, 2012 12:34 pm Post subject: |
|
|
|
Great I'll buy 2. 
Thanks for the answer!
_________________
WTB: TTA HEK + uZEUS, black version - Doepfer A-199 - C'MON SELL ME YOUR Make Noise Function YOU DON'T NEED IT YOU'VE GOT ALREADY A MATHS! |
|
| Back to top |
|
|
fac
wig MUffler
Joined: 04 Aug 2010
Last Visit: 21 May 2013
Posts: 1915
Location: Mexico
|
| Posted: Mon Mar 19, 2012 12:37 pm Post subject: |
|
|
|
My suggestion is to try the S/T forum, since it's unknown when they will be available again. I was fortunate enough to buy two little before they were out of stock, but I needed a third one and when I saw it at S/T I quickly grabbed it. It's a DMOD-sensitive issue but I just avoid using the DMOD in that particular Envelator, at least until I find someone to help me fix it.
_________________
My music website | My modular blog |
|
| Back to top |
|
|
arnoux
Ultra Wiggler
Joined: 02 Oct 2011
Last Visit: 22 May 2013
Posts: 949
Location: Italy
|
| Posted: Mon Mar 19, 2012 1:20 pm Post subject: |
|
|
|
Ok, ther's no hurry so I can wait for a while, they're not on the top of my needs but they're in my wish list so sooner or later.. Hope that Malekko can fix that little problem! Everybody needs an envelator, or 2..
Thanks!
_________________
WTB: TTA HEK + uZEUS, black version - Doepfer A-199 - C'MON SELL ME YOUR Make Noise Function YOU DON'T NEED IT YOU'VE GOT ALREADY A MATHS! |
|
| Back to top |
|
|
dequalsrxt
Ultra Wiggler
Joined: 31 Dec 2009
Last Visit: 22 May 2013
Posts: 966
Location: Portland OR
|
| Posted: Tue Mar 20, 2012 10:52 pm Post subject: |
|
|
|
| fac wrote: | | My suggestion is to try the S/T forum, since it's unknown when they will be available again. I was fortunate enough to buy two little before they were out of stock, but I needed a third one and when I saw it at S/T I quickly grabbed it. It's a DMOD-sensitive issue but I just avoid using the DMOD in that particular Envelator, at least until I find someone to help me fix it. |
I think you're cool as long as you don't use a stackable on the input. I had a couple go haywire before the issue was figured out. Once it was figured out, I was too lazy to send mine in for modification, but so far, avoiding stackables on that input, I've had no problems. My cheap generic cables, short doepfer blacks and ad-infinitum cables have all been fine and caused no problems on any of my three unmodded envelators. |
|
| Back to top |
|
|
fac
wig MUffler
Joined: 04 Aug 2010
Last Visit: 21 May 2013
Posts: 1915
Location: Mexico
|
| Posted: Tue Mar 20, 2012 11:13 pm Post subject: |
|
|
|
| dequalsrxt wrote: |
I think you're cool as long as you don't use a stackable on the input. I had a couple go haywire before the issue was figured out. Once it was figured out, I was too lazy to send mine in for modification, but so far, avoiding stackables on that input, I've had no problems. My cheap generic cables, short doepfer blacks and ad-infinitum cables have all been fine and caused no problems on any of my three unmodded envelators. |
Thanks, that's good to know. I only have stackables and Doepfer cables, so I'll just be careful not to use the stackcables with it.
_________________
My music website | My modular blog |
|
| Back to top |
|
|
rico loverde
Super Deluxe Wiggler
Joined: 06 Aug 2010
Last Visit: 21 May 2013
Posts: 3515
Location: Portland, Oregon
|
| Posted: Tue Mar 20, 2012 11:19 pm Post subject: |
|
|
|
| dequalsrxt wrote: | | fac wrote: | | My suggestion is to try the S/T forum, since it's unknown when they will be available again. I was fortunate enough to buy two little before they were out of stock, but I needed a third one and when I saw it at S/T I quickly grabbed it. It's a DMOD-sensitive issue but I just avoid using the DMOD in that particular Envelator, at least until I find someone to help me fix it. |
I think you're cool as long as you don't use a stackable on the input. I had a couple go haywire before the issue was figured out. Once it was figured out, I was too lazy to send mine in for modification, but so far, avoiding stackables on that input, I've had no problems. My cheap generic cables, short doepfer blacks and ad-infinitum cables have all been fine and caused no problems on any of my three unmodded envelators. |
the mod is extremely easy to do. if your uncomfortable with doing it ill do it for free if you cover shipping...
_________________
works for Malekko Heavy Industry |
|
| Back to top |
|
|
fac
wig MUffler
Joined: 04 Aug 2010
Last Visit: 21 May 2013
Posts: 1915
Location: Mexico
|
| Posted: Tue Mar 20, 2012 11:37 pm Post subject: |
|
|
|
| rico loverde wrote: | | the mod is extremely easy to do. if your uncomfortable with doing it ill do it for free if you cover shipping... |
Thanks for the offer. Is this the greatest forum ever or what?
Uunfortunately, shipping costs really kill the deal. I had to send my dotcom Q119 sequencer for repairs and the round shipping costs may be up to $150 (!!!).
It's not a serious issue, anyway, and I work in the Electronics department of the local public university, so I'm sure I can find someone to do the job for me.
_________________
My music website | My modular blog |
|
| Back to top |
|
|
rico loverde
Super Deluxe Wiggler
Joined: 06 Aug 2010
Last Visit: 21 May 2013
Posts: 3515
Location: Portland, Oregon
|
| Posted: Wed Mar 21, 2012 12:27 am Post subject: |
|
|
|
| fac wrote: | | rico loverde wrote: | | the mod is extremely easy to do. if your uncomfortable with doing it ill do it for free if you cover shipping... |
Thanks for the offer. Is this the greatest forum ever or what?
Uunfortunately, shipping costs really kill the deal. I had to send my dotcom Q119 sequencer for repairs and the round shipping costs may be up to $150 (!!!).
It's not a serious issue, anyway, and I work in the Electronics department of the local public university, so I'm sure I can find someone to do the job for me. |
theres some pix in the malekko sub forum. its really simple. cut a trace and solder a diode between two points. hit me up if ya have any questions.
_________________
works for Malekko Heavy Industry |
|
| Back to top |
|
|
|
FAQ & Terms Of Use
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
