Muff's Modules & More

spotta · Posted: Mon Apr 23, 2012 1:16 am Post subject:

Can you add me to the reorder list for 2 panels. thumbs up

Bacchus · Posted: Mon Apr 23, 2012 7:33 am Post subject:

I'd love to get on the re-order list for 1 panel + 1 sub-board.

Really excited to build this one. It's peanut butter jelly time!

Low-Gain · Posted: Mon Apr 23, 2012 7:56 pm Post subject:

negativspace · Posted: Mon Apr 23, 2012 8:01 pm Post subject:

cleaninglady · Posted: Mon Apr 23, 2012 8:04 pm Post subject:

Thanks Low-Gain ! These pics are really helpful.

The power distro makes alot more sense to me now. SlayerBadger!

One question. Do you think the Euro power would still have enough clearance if i used a Right Angle .156" Header on the RES EQ Board ?

Low-Gain · Posted: Mon Apr 23, 2012 8:17 pm Post subject:

maybe? depends on what direction the wires are sticking out of the Molex connector

cleaninglady · Posted: Mon Apr 23, 2012 8:40 pm Post subject:

mmm...i see what you mean.

The .156" Headers i use are a little smaller , ie : (less tall) ; so it probably wouldn't be a huge advantage.

Low-Gain · Posted: Tue Apr 24, 2012 3:39 pm Post subject:

fuck this thing sounds good... >_<

Put me down for 2 more on the next run if there is a next run...

Seriously.. REALLY GOOD

Sorry.. iPhone camera microphone sucks the goat

Low-Gain · Posted: Tue Apr 24, 2012 4:02 pm Post subject:

Finished...

Serge Resonant EQ Part 2

Low-Gain · Posted: Tue Apr 24, 2012 4:22 pm Post subject:

Final wiring... in the garden smile

bleeps · Posted: Tue Apr 24, 2012 4:44 pm Post subject:

Am I crazy for wanting to re-wire a module after seeing someone else's clean work?

Low-Gain · Posted: Tue Apr 24, 2012 5:23 pm Post subject:

[s]http://soundcloud.com/low-gain/low-gain-qeseregres[/s]

"Drone set with Serge Resonant EQ via CGS build. Running Harvestman Piston Honda through CGS Serge Resonant EQ. Piston being FM'd via Pokey Module and wavetable modulation by flame clockwork summed CV out. Eventide Space for reverb/delay."

pulse_divider · Posted: Tue Apr 24, 2012 5:42 pm Post subject:

man that sounds great, I wish I had nabbed one. someone please trade me one!

Rod Serling Fan Club · Posted: Tue Apr 24, 2012 5:57 pm Post subject:

Low-gain, if you haven't tried it yet, the EQ sounds really nice fed-back into its self as a drone machine.

Clarke, if/when you do another run i will probably grab one as well.

chocolatyshatner · Posted: Tue Apr 24, 2012 7:07 pm Post subject:

I have too much diy on my plate right now, but if another one of these panel buys comes up I'm in.

cleaninglady · Posted: Tue Apr 24, 2012 10:17 pm Post subject:

I am building the RES EQ with Polystyrene Caps to try and get the sound quality up to highest possible spec.

Anyone have an opinion on whether it's also worth dropping some $$$ on some OPA2134 op amps instead of the TL072's or LF353's to keep the quality up there ?

iopop · Posted: Wed Apr 25, 2012 12:42 am Post subject:

Low-Gain: Nice build, what's your reasoning behind having connectors for the 5 pins but the not three in the middle? I have yet to wire it all up and when I do it might make sense.

cleaninglady · Posted: Wed Apr 25, 2012 12:55 am Post subject:

Low-Gain · Posted: Wed Apr 25, 2012 7:26 am Post subject:

the spacing of the power connections on the sub board aren't centered the same as the 5 pins.. if they were I probably would have. I think they were likewise too far spaced on the 2 other wires too. If they were spaced the same as the 5 pin, i guess i could have put them on a header as well. No biggy though. smile

Just wanted to keep it as clean as possible.