MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Information
FINALLY! I believe I have gotten to the bottom of the invalid session and logout issues. Please continue to report your own experience in the appropriate threads in the "Forum Discussion and Requests" subforum. Thank you all for your patience and support! <3

Studio Electronics modules HERE FINALLY
MUFF WIGGLER Forum Index -> Eurorack Modules Goto page 1, 2, 3, 4  Next [all]
Author Studio Electronics modules HERE FINALLY
ben_hex
Certainly a lack of resonance CV out there. The VCA with plenty of stages is a good idea, only experience of that so far is the dual series VCAs in the Erica Polivoks "improved" VCA clone. That sums the output of two VCAs rather than sums the CV to affect a single VCA.
milkshake
That VCA looks good, its on my list.

The ergonomics of the whole series looks good to.
tsunamisucks
okkoto wrote:
what's the HP on these bad boys?

obviously 12, 12, 12, 8
RobJB06
I always thought the SE1 sounded great, not sure why i never hung onto one... i guess the 4089 and AMP would give you a lot of that sound?
I sold my Macbeth Backend recently, a great module but i only really needed/wanted the filter and to a lesser degree the vca, so maybe this will cover some of that territory?
TheDegenerateElite
I just noticed this looking at the pictures posted above....

these modules have a Pittsburgh Modular logo on them right next to the SE logo.


Looks like it is a collaboration.
onthelees
TheDegenerateElite wrote:
I just noticed this looking at the pictures posted above....

these modules have a Pittsburgh Modular logo on them right next to the SE logo.


Looks like it is a collaboration.


It is - this was documented elsewhere on this forum. I am not sure exactly what role Pittsburgh is playing, however.
fusionid
yes it is a collaboration born out of NAMM meet up. There is a youtube video with details.

I think what it is is that Pittsburgh is making them circuit boards, face plates etc in the far east but components are hand loaded in CA.
seriously, i just don't get it
analoglsd
Whoever wrote the product descriptions for these modules should get some kind of award.
Never thought that I'd be tempted to buy an SE filter clone module. hihi
fusionid
Looks like all boomstars will be ported to eurorack. MY ASS IS BLEEDING
Bob Borries
Dual Envelopes Module, from the manual http://www.studioelectronics.com/assets/pdf/manuals/boomstar-modular/B oomstarModularUserManual-1.1.pdf

Bob Borries
Mixer Module, from the manual http://www.studioelectronics.com/assets/pdf/manuals/boomstar-modular/B oomstarModularUserManual-1.1.pdf

Bob Borries
Ring Modulation, Noise, Sample & Hold Module, from the manual http://www.studioelectronics.com/assets/pdf/manuals/boomstar-modular/B oomstarModularUserManual-1.1.pdf

Bob Borries
Yamaha SE-80 Filter Module, from the manual http://www.studioelectronics.com/assets/pdf/manuals/boomstar-modular/B oomstarModularUserManual-1.1.pdf

Bob Borries
Oscillator Module, from the manual http://www.studioelectronics.com/assets/pdf/manuals/boomstar-modular/B oomstarModularUserManual-1.1.pdf



As well as individual modules 2 customizable systems are available.

MODSTAR SEITO 104 hp:
Midi 6hp, Oscillation (x2) 32hp, Filter (not SE80) 12hp, Multiple 2hp, Levels 10hp, Sci-Fy 10hp, Shapers 12hp, AMP 8hp, LFO 6hp, Outs 6hp.

MODSTAR SENSEI 172-176 hp:
Midi 6hp, Oscillation x3 48hp, Filters 32-46hp (1x 3003, 4075, 5089 or SE80 +1 resonant flt.) Multiple x2 4hp, Levels x2 20hp, Sci-Fy 10hp, Shapers x2 24hp, AMP x2 16hp, LFO 6hp, Outs 6hp. Hugged-up nicely in Pittsburgh Modular’s Move 104 and Move 208 Mobile Eurorack Modular Cases

The Midi module, LFO Module, Outs Module, and multiple module are still in development.
BananaPlug
Quote:
Let's say you have a one-voice skiff, and this is the sole amp. The patch you have in mind has dynamics, but you also want a touch of tremolo. The first "stage" shapes the amplitude/dynamics of the sound as you would imagine, the second can be used to create tremolo.


Why wouldn't you just mix the two CVs in a DC mixer and use one VCA? seriously, i just don't get it
Bob Borries
BananaPlug wrote:
Quote:
Let's say you have a one-voice skiff, and this is the sole amp. The patch you have in mind has dynamics, but you also want a touch of tremolo. The first "stage" shapes the amplitude/dynamics of the sound as you would imagine, the second can be used to create tremolo.


Why wouldn't you just mix the two CVs in a DC mixer and use one VCA? seriously, i just don't get it


Well... I always hook up velocity to my vca's and this would save a step that keeps a mixer free to do other duties. Having an extra pot to dial in my velocity level if very helpful to me. Then again it would have been nice to have a switch to enable parallel vac's for stereo.
botstein
I'm pretty excited for these. I don't have a lot of filter clones but have eyed the boomstar synths in the past, mostly wishing they would bring their filters to euro, which they have here. I would be most interested in a SEM type filter.

TheDegenerateElite wrote:
Apparently, these are the first in an entire series of modules based upon the Boomstar circuits.


SE is showing the whole thing at 2015 NAMM. At least 11 modules.


Does anyone know where they will be at NAMM? Or have hints at the rest of the 11 modules, of course?

fusionid wrote:
yes it is a collaboration born out of NAMM meet up. There is a youtube video with details.


I'll try to find this. Interestingly, Rich and I also met at NAMM last year and are showing our (Tipsy Circuit's) first module this year at the Muff Wiggler booth (#1371), so one could say that our is also a collaboration born out of meeting at NAMM.
Analogia
Selador wrote:
njdoyle wrote:
Can someone explain the stage inputs on Amp?

Stage 1 / 1
Stage 1 / 2
Stage 2 / 1
Stage 2 / 2

Stage hmmm..... seriously, i just don't get it d'oh! very frustrating It's peanut butter jelly time!


From what I can tell, it's two amps arranged in series, with two CV inputs to control either.

Let's say you have a one-voice skiff, and this is the sole amp. The patch you have in mind has dynamics, but you also want a touch of tremolo. The first "stage" shapes the amplitude/dynamics of the sound as you would imagine, the second can be used to create tremolo. Or, replace tremolo with a velocity voltage from a MIDI/CV converter, and you have a an all-in-one amp with velocity.


I could be completely wrong, however. Dead Banana


Bob Borries wrote:


Bob, this superb copy belongs in the BM Manual! Care to donate it?—with attribution of course.

Marc St. Regis
Analogia
Analogia wrote:
Selador wrote:
njdoyle wrote:
Can someone explain the stage inputs on Amp?

Stage 1 / 1
Stage 1 / 2
Stage 2 / 1
Stage 2 / 2

Stage hmmm..... seriously, i just don't get it d'oh! very frustrating It's peanut butter jelly time!


From what I can tell, it's two amps arranged in series, with two CV inputs to control either.

Let's say you have a one-voice skiff, and this is the sole amp. The patch you have in mind has dynamics, but you also want a touch of tremolo. The first "stage" shapes the amplitude/dynamics of the sound as you would imagine, the second can be used to create tremolo. Or, replace tremolo with a velocity voltage from a MIDI/CV converter, and you have a an all-in-one amp with velocity.


I could be completely wrong, however. Dead Banana


Bob Borries wrote:


Bob, this superb copy belongs in the BM Manual! Care to donate it?—with attribution of course.

Marc St. Regis



Let's try that again. Selador, this superb copy... Like that montage Bob. Cool toning.
Bob Borries
Analogia wrote:
Selador wrote:
njdoyle wrote:
Can someone explain the stage inputs on Amp?

Stage 1 / 1
Stage 1 / 2
Stage 2 / 1
Stage 2 / 2

Stage hmmm..... seriously, i just don't get it d'oh! very frustrating It's peanut butter jelly time!


From what I can tell, it's two amps arranged in series, with two CV inputs to control either.

Let's say you have a one-voice skiff, and this is the sole amp. The patch you have in mind has dynamics, but you also want a touch of tremolo. The first "stage" shapes the amplitude/dynamics of the sound as you would imagine, the second can be used to create tremolo. Or, replace tremolo with a velocity voltage from a MIDI/CV converter, and you have a an all-in-one amp with velocity.


I could be completely wrong, however. Dead Banana


Bob Borries wrote:


Bob, this superb copy belongs in the BM Manual! Care to donate it?—with attribution of course.

Marc St. Regis


Sure! No problem, go for it.
analogjeff
THey look great.. I have some of their stand alone synths and they are great..
clusterchord
exciting times.


ive been going back n forth over the idea of boomstar for a long while. but went with euro system instead. and now SE comes to euro...


the discrete, cascaded AMP is certainly first on my list.
Analogia
Bob Borries wrote:
Analogia wrote:
Selador wrote:
njdoyle wrote:
Can someone explain the stage inputs on Amp?

Stage 1 / 1
Stage 1 / 2
Stage 2 / 1
Stage 2 / 2

Stage hmmm..... seriously, i just don't get it d'oh! very frustrating It's peanut butter jelly time!


From what I can tell, it's two amps arranged in series, with two CV inputs to control either.

Let's say you have a one-voice skiff, and this is the sole amp. The patch you have in mind has dynamics, but you also want a touch of tremolo. The first "stage" shapes the amplitude/dynamics of the sound as you would imagine, the second can be used to create tremolo. Or, replace tremolo with a velocity voltage from a MIDI/CV converter, and you have a an all-in-one amp with velocity.


I could be completely wrong, however. Dead Banana


Bob Borries wrote:


Bob, this superb copy belongs in the BM Manual! Care to donate it?—with attribution of course.

Marc St. Regis


Sure! No problem, go for it.


Thanks Bob, but isn't the copy Selador's handiwork?
Bob Borries
Analogia wrote:
Bob Borries wrote:
Analogia wrote:
Selador wrote:
njdoyle wrote:
Can someone explain the stage inputs on Amp?

Stage 1 / 1
Stage 1 / 2
Stage 2 / 1
Stage 2 / 2

Stage hmmm..... seriously, i just don't get it d'oh! very frustrating It's peanut butter jelly time!


From what I can tell, it's two amps arranged in series, with two CV inputs to control either.

Let's say you have a one-voice skiff, and this is the sole amp. The patch you have in mind has dynamics, but you also want a touch of tremolo. The first "stage" shapes the amplitude/dynamics of the sound as you would imagine, the second can be used to create tremolo. Or, replace tremolo with a velocity voltage from a MIDI/CV converter, and you have a an all-in-one amp with velocity.


I could be completely wrong, however. Dead Banana


Bob Borries wrote:


Bob, this superb copy belongs in the BM Manual! Care to donate it?—with attribution of course.

Marc St. Regis


Sure! No problem, go for it.


Thanks Bob, but isn't the copy Selador's handiwork?




Huh? What I did was a heavily photoshopped the version that was on the Matrixsynth website, I wasn't aware who took the photos.

http://www.matrixsynth.com/2014/12/new-studio-electronics-boomstar.htm l
fusionid
i giggled when I saw this thread linked on your website thumbs up
MUFF WIGGLER Forum Index -> Eurorack Modules Goto page 1, 2, 3, 4  Next [all]
Page 1 of 4
Powered by phpBB © phpBB Group