MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

[OUT OF STOCK. NEW STOCK - JANUARY 2018.] L-1 Power System.
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page Previous  1, 2, 3, 4, 5, 6, 7  Next [all]
Author [OUT OF STOCK. NEW STOCK - JANUARY 2018.] L-1 Power System.
L-1
mechie wrote:
L-1 wrote:
The prices are the same, I just removed pre-pay discounts.

Still hoping this happens, I requested two PSU only kits via the link earlier in this project thread, I just want to confirm I'm still in for two kits hyper



I hope the new VCO sales give me possibility to order everything for PSU.
hirada
Not sure wether this makes any sense business wise, but as an idea as I'd be interested just in the rectifier/regulation part on a therefore smaller PCB, as I'd like to put the tranformer in an outbound case and carry the 15V/AC over speakon/powercon. For heat, but more so for space reasons.

So if such a module could become a bypass product, even with requiring a different PCB, maybe chances for more orders and therefore realisation are rising?

Or am I the only one? Agagin, just an idea as currently I am planning to realize this setup with the Doepfer DIY Kit PSU (without the switched PSU, which I'll plan to replace with an torrodial transformer), but I guess I'd prefer your design, if available. And be it just because of your larger capacitors lol
Egor
so these are available now, or still a future possibility?

do they have a 5v rail?
L-1
5V on bussboards. Everyone can install if needed or not install this.

I'm still collecting money to order everything. This project is more expensive than others because I want full kits. Need to order at least 100 transformers. Boards are expensive too because they are big and I want more thick foil layer and solder mask.

Please wait. I think a couple of months, not faster..
tekzon
Is this project still alive?

thanks
L-1
tekzon wrote:
Is this project still alive?

thanks



Very very soon. Check the forum end of this week. thumbs up
L-1
The power is ready. Works correct.

FULL KITS !!!! thumbs up

I will take orders next week, then will go till end of August.
So order now or in September.

12V linear bipolar adjustable power system for Eurorack synthesizers.
- 115/230V switchable.
- 1.5A per rail maximum output without ripples and noise.
- low voltage dropout under load. LDO regulators used.
- less heat because 13.7V 60VA transformer used.
- 2A fuse in the outlet.
- 1.85A thermofuses after the transformer on each rail.
- precise trimmable in range +-0.5V
- PCBs are gold platted, 2mm thickness, maximum possible thick foil layer 105mkm.
- two options: with 25mm height and 50mm height heatsinks.
- all wiring on headers. Different types possible: MTA-156 (included), spades, with screws, IDE ribbons.
- 5V regulator on busboards.


Full kits include everything for build as pictured. Full specification will post later.

Prices:

Complete kit: PSU + two busboards - $165 + $25 shipping.

PSU kit - $95 + $20 shipping.

Two busboards kit - $70 + $10 shipping.

Bare board (PSU or bus) - $30 + shipping $5 first, $2 for every additional.

L-1




































--
Amer1231
will you ship to europ or is this stricktly in the us?
Rigo
Amer1231 wrote:
will you ship to europ or is this stricktly in the us?

Since he actually is in Europe, I'd think that he will ship to Europe hihi
L-1
Geographic center of Europe is in Belarus. hihi

Here:

infradead
L-1 wrote:
Geographic center of Europe is in Belarus. hihi

Here:



learned two things today. hihi
Amer1231
i thought since because the prices are in usd waah waah
mechie
mechie wrote:
L-1 wrote:
The prices are the same, I just removed pre-pay discounts.

Still hoping this happens, I requested two PSU only kits via the link earlier in this project thread, I just want to confirm I'm still in for two kits hyper


PSU kit - $95 + $20 shipping applause
I wish to place an order for THREE PSU only kits, 50mm heatsinks if the option is available - big boxes, lots of room!
L-1
mechie wrote:
mechie wrote:
L-1 wrote:
The prices are the same, I just removed pre-pay discounts.

Still hoping this happens, I requested two PSU only kits via the link earlier in this project thread, I just want to confirm I'm still in for two kits hyper


PSU kit - $95 + $20 shipping applause
I wish to place an order for THREE PSU only kits, 50mm heatsinks if the option is available - big boxes, lots of room!


I think to complete big heatsinks with 2A thermofuses instead of 1.85A, but not have them on hands now. Will visit tomorrow the shop. If buy, will put them, if no - 1.85A then.

You can pay, will ship Thursday. Shipping for 3 PSU only kits will be $40.
L-1
Two busboards kit includes:

Two PCBs


24 16-pin IDE headers


32 standoffs


33 nuts, 34 washers, 1 screw


two 4-pin MTA-156 headers


1 voltage regulator L7808 + heatsink


two 22uF and one 100n capacitors


two 1K and four 4.7K resistors


two red, two green, two yellow LEDs
L-1
PSU kit includes:

PCB


transformer 60VA = 2 x 13.7V x 2.2A


transformer mounting set


outlet


fuse 2A


two LD1084 voltage regulators


two heatsinks - 25mm height or 50mm height - at your choise


two 1.85A thermofuses


8 capacitors 4700uF


two capacitors 100uF


two capacitors 10uF


four capacitors 0.1uF


8 diodes 1N5408


4 diodes 1N4007


two trimpots 100 Ohm


two 240 Ohm, two 2K, two 4.7K, two 10K resistors


one red and one yellow LEDs


three 3-pin and three 4-pin MTA-156 headers


6 standoffs 8mm


8 nuts, 8 washers, two screws M3, two washers, two screws M2.5


1.2m wire and a bit of shrink tube
mechie
L-1 wrote:

You can pay

Paypal to info[at]greenexpo.by ?
L-1
mechie wrote:
L-1 wrote:

You can pay

Paypal to info[at]greenexpo.by ?


Yes thumbs up
mechie
L-1 wrote:
mechie wrote:
L-1 wrote:

You can pay

Paypal to info[at]greenexpo.by ?


Yes thumbs up

Done! (sort of) - Paypal website playing silly buggers at the moment - refusing to let me select an address - hope message got through with payment hmmm.....
sixty_n
Hope my payment got through ok too. I sent it late last night paypal friends & family for a full power & busboards kit (Tim, Glasgow UK)
L-1
sixty_n wrote:
Hope my payment got through ok too. I sent it late last night paypal friends & family for a full power & busboards kit (Tim, Glasgow UK)


I sent you an email with tracking, Tim.
sixty_n
got the tracking, thanks a lot and thanks for sending it out so quick
L-1
Looks better with some tuning from L-1.



L-1
No shipping till end of August. I'm out of office. but will be online, answer emails and forum. Rasta-nana Rasta-nana Rasta-nana

Tomorrow Monday is the last day I can ship. Next shipping 1 September.
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page Previous  1, 2, 3, 4, 5, 6, 7  Next [all]
Page 3 of 7
Powered by phpBB © phpBB Group