MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Clawbell is GO! CR5000 Clave / Cowbell PCB set
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2, 3, 4, 5, 6, 7  Next [all]
Author Clawbell is GO! CR5000 Clave / Cowbell PCB set
falafelbiels
I got new PCBs in for the Clawbell last week and they are good Rockin' Banana!

We built up three over the weekend and did some value jiggling and they all worked first fireup w00t

This is a clone of the Roland CR5000 clave and cowbell in one 4hp unit. I added comparators and made the tuning pots for the cowbell available on the front panel so the best thing to have is several!






It is a pretty straightforward build with no wiring and no hard to get parts.


Right now I have about ten PCB sets for anyone who is interested. I'm thinking €15 for a PCB set and €5 for a panel (ex VAT).
Oh I charge €3 P&P worldwide by the way.

Later this week I will update some audio/video and a BOM.

Anyone?


======================================

On the list for this run:

Puzo
Timpecter
Grillojoe
Fluffybeard
Ns4w
Acilator
Soundpool
Gbiz
Paradigm X
Sammy123

and I'm out of them!

********************************


que for the next run:

euromorcego
yan6
ac
rosch
mikecameron
Mbroers
ClausF
Berend
DJ BRUTAL
C1t1zen (2x)
Timo Rozendal
InfraXpert (2x)
Antf4rm
Flab


+++++++++++++++++++++++++

so so sorry about my poor-ass recording chain....
grilojoe
I'd like a set (pcb & panel). Paypal?
fluffybeard
Panel and pcb for me please!
NS4W
panel + pcb please w00t
acilator
one PCB + panel for me!
SoundPool
I'm interested
gbiz
Panel & PCB set for me please if there's any still going falafelbiels
falafelbiels
Yeah sure, there's still a couple...

Nice to see you guys are interested!
Miley Cyrus
Paradigm X
Can I have a clave pcb only, no frontpanel pcb ?

Ill take both if needs be, but i wont be building in euro.

thanks
sammy123
Hi falafelbiels. I would be interested in 2 pcb/panel sets if they are available.
falafelbiels
Paradigm X

Sure, why not?



================================

AND WE'RE OUT!





Just so you know what you are getting into:

This is two voices sharing one output. There are two trigger inputs, one for each voice.
Jiggling component values has some influence on the sound of course. i will point out what struck me as useful in the BOM

Furthermore it has no accent circuitry. In the CR5000 this is handled by a VCA chip elsewhere in the circuit and I figured this can be done modularly, keeping this one nice and compact.

If you are collecting percussive modules for your rack this can be a simple yet worthwhile addition, taking up not too much space. I like it anyway. Must work on a typical cowbell and clave rhythm sequencer...........



Please do bug me here if you missed out and want to see another run of these.
euromorcego
yes, would like to see another run!

Will there be also Clarke panels for this one?
falafelbiels
euromorcego wrote:
yes, would like to see another run!

Will there be also Clarke panels for this one?


I was gonna do that anyway hihi

Clarke panels? You would have to talk to Chris at Synthcube for that. I'm all for it...
falafelbiels
Uploaded a bit of dirty audio to the first post. Sorry about the poor quality, I never really record anything and there seems to be a lot of noise going. Need to find out where that comes from. Just listened to my drums seperatly and there was no disturbing noise like in the recording by far.
yan6
I would be interested in one if there is another run, a clarke panel would be nice for continuity but will take either hihi
ClausF
I'm interested too
ac
I'm in for one PCB+panel. Any strange or rare parts in the BOM that we need to know about?
rosch
i would take 1 or 2 too, along with some other of your designs. we can do local pickup when i come to watch a concert
Paradigm X
hey thanks!

If youre definitely going to do another run, put me down for the second run and ill let someone else have one now, i have a huuuge backlog.

Otherwise, many thanks,
mikecameron
i'm in for a pcb and panel on the next run for sure!
falafelbiels
BOM added to first post and there will be a next run for sure...

Thanks guys!

SlayerBadger!


Will be sending out PMs about paypal specifics and what not tomorrow.



I will be sticking to the "ivory" colored Perspex and wood panels for this. These are 3mm thick and if you want to fit it out with Thonkiconns they may need a bit of careful working on with a drill of some kind, but they will be fine.
Thonkiconns like 2mm panels better.
falafelbiels
euromorcego wrote:
yes, would like to see another run!

Will there be also Clarke panels for this one?


I asked Chris (of Synthcube fame) if he is interested and it looks good so far...
euromorcego
falafelbiels wrote:

I asked Chris (of Synthcube fame) if he is interested and it looks good so far...

SlayerBadger!
rosch
anyone found a source for those switches yet other than digikey? (I would need to be a business to be allowed to order from them, at least last time i checked)
falafelbiels
rosch wrote:
i would take 1 or 2 too, along with some other of your designs. we can do local pickup when i come to watch a concert


Planning on seeing a particular concert?
Rotterdam is not very big in that department really...
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2, 3, 4, 5, 6, 7  Next [all]
Page 1 of 7
Powered by phpBB © phpBB Group