MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

[ORDER] Wogglebug by Erica Synths
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2, 3, 4, 5  Next [all]
Author [ORDER] Wogglebug by Erica Synths
Girts23
Dear colleagues, here's another development from Erica Synths - Grant Richter Wogglebug! A Wogglebug has nostalgic value for us, because in the beginning of 2014 a Wogglebug panel with a bug design was the first Erica Synths project we offered for DIY community and it actually started a company. Some month ago Scott Deyo from Brideschamber droped us a mail asking, if we plan to make another run of Wogglebug panels, and we took it serious.
We adapted Wogglebug for eurorack standart – recalculated component values to make it work properly from 12V PSU, added clock rate and stepped CV indicator LEDs, developed skiff friendly PCB, squeezed all parts on a signle PCB and made a new panel. The project is comparably easy to build, it doesn’t need wiring and calibration.



If interested, check Erica Synths SHOP! You'll find downloadable schematics and Build manual there.
Price:
PCB - 18EUR
PCB + panel 40EUR
Shipping 3EUR EU, 4EUR elsewhere in the world.
Fill kits will be available end September.
AND - a demo by out teamrider $KODEK!
Grumskiz
I've been wishing for this to happen for a while now...Guess what, it's my birthday today.
Thanks for the (unintentional?) gift hyper
billsship
Wogglebug + single board + no wiring... yes please!
mrtweed
will the older wogglebug panels of yours sold by bridechamber fit this new pcb?
horstronic
Awesome applause applause applause
Girts23
mrtweed wrote:
will the older wogglebug panels of yours sold by bridechamber fit this new pcb?


Sorry, they do not fit. I had to rearrange parts slightly.
crc
can you get this with the aluminum panel instead of black?
Girts23
crc wrote:
can you get this with the aluminum panel instead of black?


Not as standard, but when we'll make another run of panels, I can make the limited edition smile
Let me know in 4-5 weeks!
insula
already ordered!!! applause applause applause

MY ASS IS BLEEDING MY ASS IS BLEEDING
spacedog
Is this panel OK for the new pcb?

search64
Girts23 wrote:
crc wrote:
can you get this with the aluminum panel instead of black?


Not as standard, but when we'll make another run of panels, I can make the limited edition smile
Let me know in 4-5 weeks!


I'd prefer an aluminium panel as well.
geecen
This looks great!
ablearcher
Any insight on how this compares to the make noise versions? I prefer going the DIY route by I also want the fullest possible wogglebug experience.
paulstone
here my dual wogglebug in 5U format with erica pcb's
added mod led !

woah

spotta
Just waiting for the NP electro & LF398 for mine,
Some amendments to the build manual I would recommend -
SMD Caps - 10 not 13
Transistors - Board has Q3 as 3906 and Q1,2&3 as 3904 where as build manual uses designations T1 as 3906 and T2,3&4 as 3904 - may confuse some people.
Pots are labelled V1-6 in the build manual but nowhere on the PCB are these designations used, it might be best to use the Pot labels for descriptions of which ones go where - I'm still not sure!
antf4rm
went through the schematic here:
http://www.ericasynths.lv/upload//WoggleBug/wogglebug_schematics_v2.pd f

Found the answer to where the pots go.
100Ks on the left - rate, cluster, rate cv
1Ms on the right - smooth, wogg t, wogg r

for people in the states, the vactrols and the pots can be found at smallbear and then mouser for everything else.

100Ks are marked "K"
1Ms are marked "M"

spotta
thumbs up
antf4rm
spacedog wrote:
Is this panel OK for the new pcb?



no that is the bridechamber panel i believe.
rgcmusic
Very cool. I'm hoping to order one soon. What is a good first build?
antf4rm
There are tons of threads with beginner diy suggestions.
The woggle bug may not be a good choice for beginners due to the SMD soldering of the 10 capacitors. It's not a difficult build if you watch some surface mount soldering tutorials and get some practice with SMD beforehand.

My favorite soldering tutorials are here http://tangentsoft.net/elec/movies/
antf4rm
progress:







waiting for 3 more thonkikonns d'oh!
spacedog
thanks K-rAd Guinness ftw!
antf4rm
It works it works! The perfect module to finish on Halloween!

Super awesome source of randomness! Rockin' Banana!

Thanks Girts for the super ez project with a huge payoff! Guinness ftw!

ilya.n
Thanks a lot for bringing this up! Ordered.
charliedomingo
just got mine in the mail! stoked to get it built.

where did you get those cool knobs Girts?
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2, 3, 4, 5  Next [all]
Page 1 of 5
Powered by phpBB © phpBB Group