MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Nonlinearcircuits Mouser carts
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2  Next [all]
Author Nonlinearcircuits Mouser carts
didahdrieghe
Hey just ordered a bunch of NLC boards and frontplates. Does anyone have mouser carts for their projects by any chance?

Looking for Sloth, Segue, 4Seq, Timbre and the Mixer to be specific but it
might be interesting for future builders to have carts for all their projects in one place?
If no one has any I'll do some mousering myself and post them here later on.

ps. Just to be sure, for the upright resistors 0805 smd components can be used as well, right?

flipflop chaos mouser cart - https://www.mouser.be/ProjectManager/ProjectDetail.aspx?AccessID=710a4 0d889

delay no more cart - https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8f2e a06543

chopper cart - https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=d849 81e335

hyper wien - https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=3ba4 35f1be

sloth - https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=a501 9510bc

super sloth - https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=92e2 dcb889

vactrol pill - https://www.mouser.co.uk/ProjectManager/ProjectDetail.aspx?State=EDIT& ProjectGUID=a4379adc-8121-4b5c-9b26-816d2372f46d

neuron/diff-rect - https://www.mouser.co.uk/ProjectManager/ProjectDetail.aspx?State=EDIT& ProjectGUID=9a873a3f-657b-4214-8976-8a5545eb13b6

DPfilter - https://www.mouser.co.uk/ProjectManager/ProjectDetail.aspx?State=EDIT& ProjectGUID=d3594bdf-b218-4505-a949-c198f12cdc16

sauce of unce - https://www.mouser.co.uk/ProjectManager/ProjectDetail.aspx?State=EDIT& ProjectGUID=ea641f31-1934-4ce5-ab2b-5db717f4e515

4seq - http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=34fe7 d7762
flab
i have few mouser carts posted at Andrewf related projects threads,sloths as well , i ll have to put together the sergue and the 4seq at some point,is in my backlog
bak4320
I recently did the mixer. I haven't gotten around to figuring out how to label my mouser parts parts by project but could look up anything if you have questions
search64
This is the mixer:
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=f8dbb 2e34b

And this is Timbre:
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=ac964 95088

Haven't doublechecked these by the way (haven't ordered them yet).
andrewF
didahdrieghe wrote:


ps. Just to be sure, for the upright resistors 0805 smd components can be used as well, right?


Yes - I use 0805 all the time instead of thru-hole upright resistors, they fit perfectly.
andrewF
Also
not exactly the modules you want parts for, but flab posted these carts
in the NLC PCBs n shit thread
didahdrieghe
Thanks for the responses guys, I'll be updating the top post with all the carts over time.

search64: any reason you're using those expensive carbon resistors?

Gonna update with SMD carts one of these days when I get the time.
flab
sloth and super sloth ,
normal one http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=a5019 510bc ,
super one http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=92e2d cb889
search64
didahdrieghe wrote:
Thanks for the responses guys, I'll be updating the top post with all the carts over time.

search64: any reason you're using those expensive carbon resistors?

Gonna update with SMD carts one of these days when I get the time.


Yes, I'm superlazy and those were the top result when I made these carts.
building
bump for a 4seq and jerkoff cart
flab
vactrol pill - https://www.mouser.co.uk/ProjectManager/ProjectDetail.aspx?State=EDIT& ProjectGUID=a4379adc-8121-4b5c-9b26-816d2372f46d

neuron/diff-rect - https://www.mouser.co.uk/ProjectManager/ProjectDetail.aspx?State=EDIT& ProjectGUID=9a873a3f-657b-4214-8976-8a5545eb13b6

DPfilter - https://www.mouser.co.uk/ProjectManager/ProjectDetail.aspx?State=EDIT& ProjectGUID=d3594bdf-b218-4505-a949-c198f12cdc16

sauce of unce - https://www.mouser.co.uk/ProjectManager/ProjectDetail.aspx?State=EDIT& ProjectGUID=ea641f31-1934-4ce5-ab2b-5db717f4e515

hey some more that didahdrieghe never found , maybe he can update the first post -

oh well I obviously love NLC designs nanners

no 4seq just yet
Joonatin
This should work for the 4Seq, no connectors, pots, etc. Added some extra SMDs.

http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=34fe7 d7762
didahdrieghe
Cheers Joonatin and flab, added them to the opening post.
atte
Anyone has a mouser card for bools?
atari5200
A cart for Timbre would be nice too, just about to order a PCB/Panel for that...
thenormanconquest
I made a bunch of Mouser carts for NLC stuff and am now sharing.

Please note that in all my builds, I'm going for rainbow LED action, so there's some current limiting resistors (750, 5.1k, 13k are the values for those and I got 4 of each) and 8 different colors of LEDs that you might want to delete or modify depending on your needs and desires Miley Cyrus

and in all my projects, I'm leaving the jacks, pots, headers, etc. in case you wanna be lazy. basically, these are all ready to go minus subtracting/adding LEDs that you want.

4Seq-
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=da96e df3f2

BOOLs, Segue, Chopper, Sloth, Super Sloth, and Dual LFO are posted in the next post by me.
thenormanconquest
Segue-
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=556ed e9bd4

Dual LFO with Difference Rectifier-
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=2ca51 c8e88

BOOLs (also note that I have 4 different logic ICs in the cart coz I wanna try em all out, you only need one per module)-
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c95e0 230ab

Regular Sloth-
screwed this one up, lemme know if anyone really needs this and I'll repost

Super Sloth-
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=5a6a5 ae63d

Chopper-
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=5471e d8b1c
atte
thenormanconquest wrote:

BOOLs (also note that I have 4 different logic ICs in the cart coz I wanna try em all out, you only need one per module)-
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c95e0 230ab


You forgot 2x stand-up 10R, something like these:
http://www.mouser.dk/Search/ProductDetail.aspx?R=271-10-RCvirtualkey21 980000virtualkey271-10-RC
thenormanconquest
woops! added those to the mouser cart. think i planned on using my own stock of through hole resistors so I ignored a few things potentially.
atte
Ok, thanks for adding them SlayerBadger!
schwittersplayspop
Hi all,

Any recs for Mouser parts suitable for the potentiometer and connection sockets for the Sloths?

I have the 4HP PCBs and panels and have populated the board using the standard Sloth Mouser cart above (many thanks to didahdrieghe for putting it together) but after buying, realized it doesn't include those components.

Thanks!
andrewF
schwittersplayspop wrote:
Hi all,

Any recs for Mouser parts suitable for the potentiometer and connection sockets for the Sloths?

I have the 4HP PCBs and panels and have populated the board using the standard Sloth Mouser cart above (many thanks to didahdrieghe for putting it together) but after buying, realized it doesn't include those components.

Thanks!


sorry I don't know much about Mouser, rarely buy from them.
You want these sockets

and this 10k pot looks about right and couldn't see a suitable 100k, but Tayda have them....probably easier to get it all from Tayda, tho get extras of their sockets, about 1 in 10 are dodgy....for the price it does't matter much
MatrixModulator
schwittersplayspop wrote:
Hi all,

Any recs for Mouser parts suitable for the potentiometer and connection sockets for the Sloths?

I have the 4HP PCBs and panels and have populated the board using the standard Sloth Mouser cart above (many thanks to didahdrieghe for putting it together) but after buying, realized it doesn't include those components.

Thanks!


I think tayda also have thoses sockets, and shipping is cheap.
You can also have thoses sockets on ebay sometimes.
schwittersplayspop
andrewF and MatrixModulator -- many thanks for the help! I'll order and continue my build.
rompersgohard
Has anyone made a mouser cart for a Stasis Sloth?
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2  Next [all]
Page 1 of 2
Powered by phpBB © phpBB Group