MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

DIY Eurorack workshop LONDON @ 04/05.11.17 @ MUSICHACKSPACE
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2  Next [all]
Author DIY Eurorack workshop LONDON @ 04/05.11.17 @ MUSICHACKSPACE
I/Ø
Hey Wigglers!
For all of you living in Barceloca or close by..... We are making the first event in Spain to build your own percussive modular drum machine
1st workshop about DIY Eurorack Percussion and Distortion modules on the Saturday 19th and Sunday 20th of December of 2015 at Hangar.org

ab•er•rant (ə ber′ənt, ab′ər-), adj.
departing from the right, normal, or usual course. Deviating from the ordinary, usual, or normal type; exceptional; abnormal.

‘000‘ is about aberrant analogue distortion and percussion devices for both stand-alone and Eurorack format. The Spanish/German øpen-hardware team will present at the London Music Hackspace for the fist time their new set of analogue percussive tools, followed by a DIY workshop where participants can build their complete stand-alone – or Eurorack-compatible modular drum system.

Both days are independent so participants can choose when to join the workshop. If you can just attend for a few hours just write to us to adapt the workshop to your needs.

Saturday 19th Dec. from 12h-19h
Sunday 20th Dec. from 12h-16h

We will have our complete catalog of modules available and you will have the chance to make them with our support and make sure everything works correctly.

For information and reserving your place to the workshop, please join in through our platform WORKSHOP REGISTRATION

The workshop will cover both theory and practice about analogue circuit design, percussion and noise. No previous experience in electronics is needed but interest and patience is mandatory.

Available Modules: BSDM Bareback BasS DruM, SNORE Fist Drum, SCAT 0-logical distrotion, WHIP Midi-Din Sync 2 trigger Interface and Powersupply.
Workshop prices includes all materials, pcb, front panel, metal potentiometers, knobs and custom light buttons.

Hope to see you there!


I/Ø
BTW. Next Workshops:
3/4/5 December London Music Hacker Space 000 Modular Event London
19/20 December Hangar Barcelona hosted by our hated archenemy Befaco

See you arround!

♡X♡X♡
LURGACI
Halo I/O,
I´m interested on be part of the workshop but i can only attend on sunday.

I would like to build the WHIP Midi-Din Sync 2 trigger Interface and the BSDM Bassdrum, do you think i might have some time to build both 000 modules?

btw. the front panels and the special buttons looks fantastic!!!
MY ASS IS BLEEDING
I/Ø
Halo LUGARCI, thanks for your interest on our modules.

If you can only come on Sunday, there is no problem at all and we will help you on the soldering. As you live in Berlin we could meet afterwards -or in the next workshop-, to test and calibrate it.

Each module takes from 2h to 4h depending on your e-skills.
As designers takes us about ~ 1,5h as we try to make the documentation as clear as possible. The idea about the 000 meetings its to learn through the process, the e-design and about percussion and distortion synthesis.
We´d try to create a collective experience, not just a soldering meeting...but this depends on each of you.
All best and see you in a few days.

0x0x0
Befacosynth
I/Ø wrote:

19/20 December Hangar Barcelona hosted by our hated archenemy Befaco
♡X♡X♡


We want one of each.... For the three of us. So reserve our batch coverd in red fur with a few drops of Varon Dandy .
I/Ø
Hey bas†ards,
soon we will Jedi last night at the Roten Roses!

All our modules comes with a great 000 Eau d´modular fragance, but of course we´ll make a nice packagin for you 3!

Greeting from the warm Lipzia
0x0x0
Patan_depressor
Hola!

Where did you were all this time????
I've always wanted a modular drum machine!!
Do you have any plans for more modules????
Do you have any plan to come to the north of spain(Galicia)?
I could invite you to some pulpo a feira and more typical foodf if you come here, hehehehe......
Anyways, i will try to go to the BCN workshop, i´m looking now for a flight for that dates. Hope to see you there guys...
I/Ø
Hey hola patán,
seems we have been studying in the same spanglish academy, hihihihi

We have been working in the cave or a few years...till now the following dates are confrmed:

28/29.11.15 – C-Base station Rungestraße 20, 10179 Berlin
04/05.12.15 – London Music Hacker Space Unit 15, (ContainerVille) 5 – 10 Corbridge Crescent London E2 9DS
19/20.12.15 – Hangar.org Barcelona Emilia Coranty, 16, 08018 Barcelona
09/10.01.16 – T-37 Calle Teruel, 118 28020 Madrid
XX.03.16 C-Base Berlin (TBA)

We have now avalable the following modules:
BSDM - Aberrant Bass drum with long decay perfekt for trepanant percussions and drones. 2 oscilators (1 fixed) ƒ 32Hz – 192Hz
SNORE - Fist drum- Sci-fi Noise percussions (snare, charles, zap)
SCAT- Octaver Bass fuzzschmutz
WHIP MIDI/DIN Sync In/Out/Soft Thru, clock, start/stop, accent, 9 trigger, clock generator/divider/multiplier, diferent ppqn and a loooog etc.....
TOMSoffinland High and low Toms, Fm, Droner. Available in mid December
HEILHATS Sieg cymbals!. Available in mid December
Giftgiver Transister Lather filter Available in mid December

We are working on new percussion modules and distrotions, so slowly all the info will come to the website...

You are really welcome to pass by the BCN or Madrid workshop Mr Patán!

Patan_depressor
HOLA!
I will join the madrid workshop in january!
I really love the aesthetics and names of your modules, its great to give some humour on the eurorack community! applause
The laser enraved light buttons they look fantastic!
is the WHIP a new version of the MAYDAY?
thank you very much!
I/Ø
The workshop has started with all the new 000 modules!
Here the first working WHIP Midi/Din Sync In - Out, Clock, Start/stop, 9 trigger, accent, clock generator, divider, multiplyer, midi delay and looong etc...open hard/softtware!
have a great weekend!
I/Ø
The spanish inquisition is back

BARCELOKA @ HANGAR
Saturday 19th Dec. from 12h-19h
Sunday 20th Dec. from 12h-16h

MANDRIL @ T-37
Saturday 9th Jan. from 12h-19h
Sunday 10th Jan. from 12h-19h


We will have our complete catalog of modules available and you will have the chance to make them with our support and make sure everything works correctly.

For information and reserving your place to the workshop, please join in through our platform WORKSHOP REGISTRATION

The workshop will cover both theory and practice about analogue circuit design, percussion and noise. No previous experience in electronics is needed but interest and patience is mandatory.

Available Modules: BSDM Bareback BasS DruM, SNORE Fist Drum, SCAT 0-logical distrotion, WHIP Midi-Din Sync 2 trigger Interface and Powersupply.
Workshop prices includes all materials, pcb, front panel, metal potentiometers, knobs and custom light buttons.
LURGACI
Halo 000 team,
I will be also in Madrid this weekend!

I´m visiting a friend and going to your workshop, Berlin workshop was really great experience!
I would like to build this time the MIDI-Din Sync interface, it looks really great!
Is it still possible to join?
mucas gracias
I/Ø
Modular people, MSSW Über workshop is coming!
After a very good start of MSSW series with 000, Rebel and Befaco (thanks for the support!!) we will be organizing a joint workshop at c-base where all modules from all three manufacturers will be available at the same time! A great opportunity to build modules if you missed any of the workshop in the series!
But this is not all, we are bringing friends! Bastl Instruments, 4ms and Sanazzy FX will be joinig Über workshop offering their designs! We don't have confirmation on wich modules will be available from them, so drop'em a mail to doublecheck!

Workshop schedule:
Saturday 2nd April (12:00 19:00) Only 000 Modules!
Sunday 3rd April (10:00 20:00) Über Workshop with 000, Befaco, Rebel and Friends!
Confirmed modules and prices so far are:
000
BSDM - 115€
SNORE - 135€
SCAT- 85€
WHIP 135€
TOMSoffinland 145€
HEILHATS 155€
Befaco
Instrument Interface (125,00€)
MIDI Thing (120€)
Crush Delay v2 (135,00€)
BF-22 (140,00€)
Rampage (170€)
Dual Atenuverter (65,00€)
Power Bus (60,00€)
Spring Reverb (140,00€)
VC Slew Limiter (70,00€)
Sampling Mod. (125,00€)
Even VCO (130,00€)
Mixer (55,00€)
Output Module (85,00€)
Rebel
Stoicheia :100€
Logoi : 110€
Klasmata : 110€
Phoreo : 100€

Workshop slots are VERY LIMITED, so please register on advance to reserve a spot and let us know wich module are you interested in.
Follow this link to reserve a spot:
http://0x0x0.porn/product/000-modular-workshop-registration/

To finish a heavy duty soldering session, we have prepared a bunch of showcases for your enjoyment. We are happy to have amazing artists performing together with us. These showcases will takje place at c-base main hall, starting around 20:30 - 21:00 and finish at 00:00 sharp!
Thunderdrone(ES)
Martin Klang(UK)
Andŕé Gonçalves(PT)
Los Altos del Jarama (ES/DE)
Dan Snazelle (US)
I/Ø
Hi! we have now more info about the first MSSW Event with all manufactures involved....all ready and clear on our website MSSW BERLIN,
fell free to pass by and check the news!
LURGACI
Hi Victor, thanks for making this event, applause
The line up of manufacturers for sunday its awesome!
Last time was great!
p.s: should i also register to go to the workshop in sunday?
see you soon
insula
I/Ø wrote:
Hi! we have now more info about the first MSSW Event with all manufactures involved....all ready and clear on our website MSSW BERLIN,
fell free to pass by and check the news!


looks terrific!!! MY ASS IS BLEEDING MY ASS IS BLEEDING

applause applause applause
I/Ø
Hey Lurgaci and Insula, great that you like the event!
here is the flyer of the performances on sunday its going to be a great weekend....
p.s. please Lurgaci sign in and select which module will you choose, if you plan to come on the weekend. All best!

I/Ø
Hey new dates for the madrid workshop!
Saturday 04 - Sunday 05 @ T37

T37 000 modules

NEW modules for the DIY doll house!

I/Ø
Hola DIYr´s from the middle Spain area...we are back with a new series of workshops in Madrid, again on the T-37´s Headquarters!

Saturday 14 January from 12h.
Sunday 15 January from 12h.


New modules ready to solder and the V3 of all the old ones!

Available modules:
PERCUSSION
BSDM Bareback Bass Drum
SNØRE - Catacombs Fist Drum
TOMS of Finland Analog Fm Drum Generator
HEILHAT - Sieg Cymbals

DISTORTION
SCAT 0-Logical distortion Bass fuzz octaver with tilt Eq.
YKINMKATO Stomp-box Interface Designer BASS Aberrant Distortion

CONTROL
WHIP Midi-Din Sync 24-Clock generator/divider/multiplier Start/stop/accent

We will also bring some of the last stage prototypes to test and pre-order and our series of Slim Skiff aluminum cases!
- 6 Mono Ch. Mixer : 30mm Led faders, PFL/AFL, Mute,PAN, Send/Stereo return, headphone, link, Master, Output modular / line, etc.....
- 8Ch. Audio/CV Mix Bus:/ 2 4 Ch. Bus & master
- Parametric Eq
- SPK® 10W Cass D Stereo Speaker and headphone module
- 10GHz High frequency Electrosmoog
- Module tester / Atmel Swiss Knife 2 double DAC 4 outs (CV/Audio), Encoder, 5 pot, 8 push led buttons, Mosfet out and a 1,8" TFT screen
- Slim Skiff Cases 103HP Black aluminum Aluminio: 1x3U / 3x3U / 5x3U / 7x3U With custom wood White oak side panels

Hope to see you arround....soon more workshops in Berlin, Leipzig, London and Barcelona...
We are not social...but you can so sign to our mailing list for updated info:
http://0x0x0.porn/contact/
C U S000N!

I/Ø
New dates for workshop in Berlin!

We are back with the new workshop series for this 2017, with some more tools and a new review of previous modules. The next workshop series will be held in Leipzig, Berlin and soon confirmed for Bilbao, Barcelona and Madrid.
Dates:
Leipzig: Friday 24th March 2017 @ Criticalmedia.space From 14-20h.
Berlin: Saturday 25th / Sunday 26th March 2017 @ Cbase Berlin From 12-19h.
Bilbao/Madrid/BCN TBA Mid April
You are invited to pass by or write us a mail to register for the workshop.
We have only 15 places available on each location for a great soldering and learning experience, so first-sign-in, first-served!



We have been actively working on the system from the basic things to the most sophisticated ones, on this new series we will have more modules ready with some special customized parts like black aluminum and gold ring knobs on 3 sizes (Xs, M, XL) for different control parameters and some new small and medium size back light momentary buttons.

In order to offer a full 000 system, we have worked on new light weight and hand luggage friendly aluminum skiff cases, white american oak side panels for 1/2/3/5/7 rows and some custom switched-mode power supply.
For the next workshops some of these tools will be available and some will be ready for pre-order, so as we are producing a reduced amount of these units, please write us in advance to keep some of these designs for you.

Review 2017:
-BSDM Bareback BasS DruM: the 2017 review it has bigger distance on the front panel components (pots/buttons), the Whip (trigger input) now reacts to the voltage in (3-10v) to create more possible dynamics with the accent (3-10v). For the workshop now its easier to build, as also has more space between components and the overall module is held on a smaller HP format 7HP.
Kit Price: 115€
- SNORE Catacombs Fist Drum Now the front panel its redesigned and components has more space between them, we have add a new external sound input controlled by the noise/external potentiometer, offering a new possibility of percussive and drone sounds.Whip and Accent are also updated as in the BSDM and the new external panel dimension its 8HP.
Kit Price: 125€
- Toms of Finland We have made a full review of the module, and added a new external input controlled by the Noise/ext potentiometer and added a better spacing between the knobs on front panel and internal components. Same 10HP.
Kit Price: 145€
- Scat-0-Logical distortion Our first distortion module, a fuzz octaver specially designed for bass and percussive sounds which adds some upper harmonics and fuzziness to the original sound. It has a tilt eq to bring the distortion to an upper or lower scale. Now the Scat is designed with a better interface and control ranges on a 5HP size.
Kit Price: 90€
- WHIP MIDI-DINSYNC-Clock Generator Trigger interface.It offers a fully-compatible MIDI and Din Sync 24 input and output with soft thru. This new version includes a full featured Midi clock with all possible combinations for syncing your clocks and start/stop messages. It´s designed to receive or send clocks from the module through the MIDI / Din sync / jack 3,5mm connector on any combination possible. The MIDI learn is operated through the custom light push button with BPM reference, now have a few submenu options to learn the Midi channel and notes, create clocks or act as a tap tempo which outputs clocks (MIDI/DIN/Jack) and clock subdivisions on the 9 trigger jacks. The Lesson button can crate patterns and subdivision of the main clock. The accent has a build in level control, sending notes from 0 to 12v. The RTFM Potentiometer its fully configurable to offer midi delay, BPM Master tempo control or custom features.
Kit Price: 125€

New Modules:
PERCUSSION
- HeilHats: Open and closed hats with independent control of decay and trigger and summed output. White/pink noise or metal sound selector, external sound in and cut between open and closed hats. 10HP.
Control: Pitch, BP Filter, Noise/metal, Volume and independent decay for CH/OH
Button: White/pink Noise, Cut of OH with CH, Trigger OH, Trigger CH
Inputs: External Audio In, Trigger OH, Trigger CH, Accent
Output: Summed Output
Kit Price: 135€

DISTORTION
- YKINMKATO Stompbox interface designer This new module started in our workbench as a platform to developed new effects modules, and now has become one of the favorite 000 modules for the audience, it has an attenuator input a dry/wet and volume output CV controllable, a clean bypass and 3 parameters for different shield distortions that we are producing. The module comes with a versions of the famous RAT distortion, with some extras and mods to work nicely for bass and percussive sounds and with modular impedance and audio levels. The kit also includes a 000 perforated board where to design your own distortion. On the following months we will develop and upload more distortion designs as shields to be used by the community and attached at the back of the module.
Control: Att IN, Att OUT, Dry/wet, X/Y/Z
Button: Bypass, Diode Clipping
CV: CV Input Audio IN, CV Audio Output, CV Dry/wet
Inputs: Audio In
Output: Audio Out
RAT Distrotion: X Texture, Y Distortion and Z volume
Kit price: 145€

MIXXING / SUMMING
- 8ct8: 8 channels of summing Audio or CV (DC-coupled outputs) with the possibility to have 2 independent outputs on 2 Bus channel (Bus A 1-4 / Bus B 5-8), mute per channel and a master out control by 20mm light sliders. It has also a normal output and an inverted output for CV options and a PFL output to be linked to external modules (eq, efx, etc.). This summing tool has a gain of 2 so you can get to a clipping distortion when signals are overloaded. 2 Bicolor led reacts to the Audio or cv so you can visualize the state of your signal. 12HP.

- MIXXXOLOGY 6ch. mixxer with Pan, Mute, PFL, Send (AFL/PFL), 30mm led slider per channel with stereo return, 5 segment led meter, headphone and master outputs for modular or line level output. This module is linkable, so you can expand your channels. 21HP.
Kit Price: TBA

EQUALIZERS
- EQ69 Parametric equalizer based on the famous studer 169 design, with high and low shelve and 2 medium parametric. 4HP.
Kit Price: TBA

Misc.
- SPK Dentata A 10w speaker on your system with 2 summed inputs with visual clipping control, a headphone amplifier, mute, external output, based on Class D technology. 14HP.
Kit Price: TBA

You are invited to pass by or write us a mail to register for the workshop, as we have only 15 places available on each location, for a great soldering and learning experience, first-sign-in, first-served!
More info: 000 Berin workshop
woodster
You should come over to the Brighton Modular Meet in the summer, I'm sure you could arrange Brighton and London workshops with lots of takers.
I/Ø
Hola W,
thanks for the link and info!

We where thinking on take part last year...but too many things going on for 2 brains at work. Definitely we should think on assist, the workshops and time in UK (Music Hack Space / Cafe OTO in London) were always great!
Thanks for your interest
/vic
I/Ø
we are ready for the berlin journey!
000 TEASER
SHWCASE: Common Ground 24th March at 20h - Weisestraße 24 12049 berlin
WRKSHP: c-base 25/26th March from 12pm-19h Rungestraße 20, 10179 Berlin
I/Ø
WORKSHOP & SHOWCASE 16th/17th Sept. from 13pm to 20h @ c-base Rungestraße 20, 10179 Berlin

During the next weekend you can come to see, use, learn and build your own 000 modules, the workshop has no fee but the places are limited, so please confirm before coming!

You will only pay what you build and then each module will be tested and calibrated so you could bring home a fully working module.

15 Limited places, selected by order of registration.
+info, questions & registration : 000 a-t 0x0x0 d-o-t porn

If you are interested you can join the mailing list at the website or reply to this thread.

See you soon in Berlin!



000 Modules
roger
do you also offer faceplates without the cringy names? confused
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2  Next [all]
Page 1 of 2
Powered by phpBB © phpBB Group