Intellijel 1U Info Thread

Cwejman, Livewire, TipTop Audio, Doepfer etc... Get your euro on!

Moderators: Kent, Joe., analogdigital, infradead, lisa, parasitk, plord

Post Reply
User avatar
cackland
Super Deluxe Wiggler
Posts: 1706
Joined: Thu Dec 28, 2017 5:42 pm
Location: Los Angeles, California

Post by cackland » Sun Sep 01, 2019 5:28 pm

:yay:

User avatar
RowanH
Common Wiggler
Posts: 133
Joined: Thu Apr 28, 2011 5:43 pm
Location: Brixton, UK

Post by RowanH » Mon Sep 23, 2019 7:02 am

The polyend loopop video has what appears to be a new intellijel 1u touch/expression module, top left of his palette case. Not seen it announced anywhere.

[video][/video]

nihile_tropes
Learning to Wiggle
Posts: 8
Joined: Tue May 07, 2019 12:19 pm
Location: Vienna

Post by nihile_tropes » Mon Sep 23, 2019 8:42 am

You can already find the new Intellijel module on modulargrid, if you look hard enough. It's called FSR. Then there's also the new Duatt 1U.. :razz:

User avatar
Johnnyfive
Common Wiggler
Posts: 195
Joined: Tue Oct 04, 2016 1:59 pm
Location: London
Contact:

Post by Johnnyfive » Mon Sep 23, 2019 9:35 am

RowanH wrote:The polyend loopop video has what appears to be a new intellijel 1u touch/expression module, top left of his palette case. Not seen it announced anywhere.
nice spot! in the comments he says it's called the FSR. Juno are listing it at £74 but there's not photo/details: https://www.juno.co.uk/products/intelli ... 747522-01/

User avatar
Crimesofthecrown
Common Wiggler
Posts: 219
Joined: Sat Sep 16, 2017 2:25 pm
Location: Santa Monica

Post by Crimesofthecrown » Mon Sep 23, 2019 10:23 am

batch wrote:
SavageMessiah wrote:nonlinearcircuits has started putting out 1u modules in intellijel format too. So far there's a difference rectifier and a stripped down sloth, iirc.
Yes, just saw this:

https://www.modulargrid.net/e/nonlinear ... loth-chaos

Nice to see some small 1U modules coming to market. Really need more options. The new VCA looks great.
Price is too good to not get one!
KOUFAR x TERROR CELL UNIT
GOD IS WAR x SUTEKH HEXEN

www.godiswar.bandcamp.com

User avatar
cackland
Super Deluxe Wiggler
Posts: 1706
Joined: Thu Dec 28, 2017 5:42 pm
Location: Los Angeles, California

Post by cackland » Fri Sep 27, 2019 3:57 am

Spotted this on intellijel instagram story...

Intellijel baby quadrant? (Right of the new 1U VCA)
Image

EdJ
x => { wiggle(x); }
Posts: 146
Joined: Tue Aug 31, 2010 12:18 pm
Location: Copenhagen

Post by EdJ » Fri Sep 27, 2019 5:36 am

cackland wrote:Spotted this on intellijel instagram story...

Intellijel baby quadrant? (Right of the new 1U VCA)
Image
I asked, and they had this to say :party:

Image
off hiatus

User avatar
cackland
Super Deluxe Wiggler
Posts: 1706
Joined: Thu Dec 28, 2017 5:42 pm
Location: Los Angeles, California

Post by cackland » Fri Sep 27, 2019 5:51 am

Standard response

User avatar
Hovercraft
Super Deluxe Wiggler
Posts: 1098
Joined: Fri Nov 27, 2015 12:22 am
Location: DC

Post by Hovercraft » Fri Sep 27, 2019 9:12 am

The Duatt? Biatt? The Intellijel 7U cases have been a success, and with a larger user base, there's a greater inventive to develop more 1U modules.

User avatar
Johnnyfive
Common Wiggler
Posts: 195
Joined: Tue Oct 04, 2016 1:59 pm
Location: London
Contact:

Post by Johnnyfive » Fri Sep 27, 2019 9:20 am

Hovercraft wrote:The Duatt? Biatt? The Intellijel 7U cases have been a success, and with a larger user base, there's a greater inventive to develop more 1U modules.
Duatt: https://www.juno.co.uk/products/intelli ... 747516-01/

User avatar
Krater
Wiggling with Experience
Posts: 456
Joined: Fri Apr 05, 2013 2:49 am
Location: Germany

Post by Krater » Fri Sep 27, 2019 9:25 am

Looks like a two channel version of Quadratt = Duatt?, but I´m wondering, what the switch between the two knobs does.

bc3
Veteran Wiggler
Posts: 601
Joined: Tue May 27, 2014 11:31 am
Location: rva

Post by bc3 » Fri Sep 27, 2019 9:27 am

Krater wrote:Looks like a two channel version of Quadratt = Duatt?, but I´m wondering, what the switch between the two knobs does.
Bi and Uni-Polar just like on the Quadratt I would assume?

User avatar
Krater
Wiggling with Experience
Posts: 456
Joined: Fri Apr 05, 2013 2:49 am
Location: Germany

Post by Krater » Fri Sep 27, 2019 9:35 am

Don´t know, I see three switches, two above the knobs, I guess these are the ones for uni/bi polar switching like on Quadratt. Plus the one between the knobs.

User avatar
Trebbers
Wiggling with Experience
Posts: 434
Joined: Mon Aug 24, 2015 8:49 pm

Post by Trebbers » Fri Sep 27, 2019 9:47 am

Maybe it's to link the channels so you can use it as a stereo attenuator.

User avatar
intellijel
Super Deluxe Wiggler
Posts: 2056
Joined: Wed Jan 07, 2009 8:39 pm
Location: Vancouver

Post by intellijel » Fri Sep 27, 2019 1:33 pm

cackland wrote:Standard response
ready in 1-2 weeks. Our manufacturer is behind schedule (thought I would have them already).

Granular
Common Wiggler
Posts: 82
Joined: Sun Jul 14, 2019 12:39 pm
Location: Switzerland (Bern)

Post by Granular » Sun Sep 29, 2019 3:14 am

Will we ever get 1U uScale? :hail:

User avatar
saiteron
Learning to Wiggle
Posts: 14
Joined: Fri Sep 21, 2018 4:44 pm
Location: Columbia, SC, USA
Contact:

Post by saiteron » Mon Sep 30, 2019 2:33 pm

here's that Duatt page for those who haven't found it yet:

https://www.modulargrid.net/e/intellijel-duatt

looks like the middle switch is to add extra gain to A, making it less of an "att" and more of an "amp"

User avatar
silkynight
Common Wiggler
Posts: 234
Joined: Sat Apr 26, 2014 10:31 pm
Location: ...
Contact:

Post by silkynight » Mon Sep 30, 2019 3:33 pm

From triplatt manual.

Ax2 switch
In the up (on) position, this switch doubles the voltage appearing at Channel A’s input
[A].
For example: leave the input of Channel A unconnected; set the channel’s polarity switch
to -/+, turn the channel attenuator fully clockwise; and set the Ax2 switch to the down
(off) position. Triplatt will send 5V to Channel A’s input [A]. Flip the Ax2 switch to the up
Page 6
Triplatt Manual
(on) position, and Triplatt sends 10V (5V x 2) to Channel A’s input. Rotate the knob fully
counterclockwise, and Triplatt sends -10V (-5V x 2) to Channel A’s input.
The Ax2 switch is a convenient way to double the input voltage, or to set a full +10V or
-10V DC offset to the signal patched into Channel B.

User avatar
MikeLeeBirds
Common Wiggler
Posts: 64
Joined: Tue Mar 20, 2018 2:59 am

Post by MikeLeeBirds » Mon Oct 07, 2019 1:56 am

Image

Interesting!
A pressure touch sensor with CV and gate in 10hp. Very useful.
Let’s call it „Sense“ until the official name is revealed.

And the Duatt that was mentioned earlier. Like a baby that Quadratt and Triplatt made.

User avatar
cackland
Super Deluxe Wiggler
Posts: 1706
Joined: Thu Dec 28, 2017 5:42 pm
Location: Los Angeles, California

Post by cackland » Mon Oct 07, 2019 2:38 am

I feel like Intellijel is about to unload with all new gadget goodies.

User avatar
MikeLeeBirds
Common Wiggler
Posts: 64
Joined: Tue Mar 20, 2018 2:59 am

Post by MikeLeeBirds » Mon Oct 07, 2019 5:13 am

Oh, I now see that the thing I called „Sense“ is actually „FSR“, just like this one:

https://www.modulargrid.net/e/pulplogic-fsr-silver

Image

I had missed the reference to Loopop‘s video where it’s already been mentioned.

uebl
Wiggling with Experience
Posts: 393
Joined: Sun Jan 29, 2017 3:09 pm
Location: Germany

Post by uebl » Thu Nov 14, 2019 5:09 am

I really like the added x2 gain of the Duatt! Exactly what I needed. I will probably exchange one of my 2 1U Quadratts for a 1U Duatt + 1U Zersoscope (I've got another unused 1U 2hp..). :yay:

User avatar
Scott M2
Common Wiggler
Posts: 60
Joined: Tue Apr 03, 2018 1:35 am
Location: Toronto
Contact:

Post by Scott M2 » Thu Nov 14, 2019 7:52 pm

transient_modules wrote:Hi everyone! As has been said before in this thread, I've made three 1U modules for Intellijel cases. I just want to add that the u2X and the u3A are available as DIY kits, because I mainly did them for that reason: (AFAIK) there was no DIY modules available for that 1U row so I wanted to give the option to build a couple of utilities to the DIYers with Intellijel cases. The u4R is tricky to build so it's only available assembled.

Here's a small picture of the three of them. For more details: http://transientmodules.com/1u-modules

Image

:)
Any chance that these babies will be available in black?

Ebotronix
Veteran Wiggler
Posts: 623
Joined: Tue Jul 02, 2013 4:15 pm

Post by Ebotronix » Wed Dec 04, 2019 11:02 am

1u Intellijel format 4TE adapter
Image

User avatar
mhtones
Dreams in CV
Posts: 1474
Joined: Fri Aug 21, 2009 12:18 pm
Location: SF Bay Area

Post by mhtones » Wed Dec 04, 2019 1:04 pm

intellijel wrote:
cackland wrote:Standard response
ready in 1-2 weeks. Our manufacturer is behind schedule (thought I would have them already).
Any update on when the 1u dual VCA will be back in stores?

Post Reply

Return to “Eurorack Modules”