MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

ADDAC200PI gain structure?
MUFF WIGGLER Forum Index -> ADDAC System  
Author ADDAC200PI gain structure?
SamUK
What's the gain structure on the ADDAC200PI?
SamUK
screaming goo yo

edit: are ADDAC at MESSE?
SamUK
Third times a charm?

How much gain for incoming audio? How much attenuation for outgoing?
303ish
Old thread but looks like you have not had an answer yet?

I have a 200PI and it works very well not only as send/return but also as a 2in/2out line to modular level. I'm using it as a mono headphone amplifier (!) as well, works fine.
SamUK
303ish wrote:
Old thread but looks like you have not had an answer yet?

I have a 200PI and it works very well not only as send/return but also as a 2in/2out line to modular level. I'm using it as a mono headphone amplifier (!) as well, works fine.


No I haven't, thanks for your response. Don't suppose you have a voltmeter do you?
Paranormal Patroler
Hey SamUK, I just saw your post. I asked about this during SB17 and I explicitly remember that the gain is X 20 whereas the attenuation is / 20. Does that help?
SamUK
Paranormal Patroler wrote:
Hey SamUK, I just saw your post. I asked about this during SB17 and I explicitly remember that the gain is X 20 whereas the attenuation is / 20. Does that help?


Perfect. Thank you.
Paranormal Patroler
SamUK wrote:
Paranormal Patroler wrote:
Hey SamUK, I just saw your post. I asked about this during SB17 and I explicitly remember that the gain is X 20 whereas the attenuation is / 20. Does that help?


Perfect. Thank you.


You are most welcome! Let us know how you like the module, I haven't tried it myself but I am curious.
createsounds
hows the module fair,
I'm trying to find a good s&r to run a mutronIII with my modular,
and a few other effects,
MUFF WIGGLER Forum Index -> ADDAC System  
Page 1 of 1
Powered by phpBB © phpBB Group