MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Workshop in Zürich: VIM - Voltage Injecting Mixer
MUFF WIGGLER Forum Index -> Music Tech DIY  
Author Workshop in Zürich: VIM - Voltage Injecting Mixer
seismic
Hi folks

i am organizing a workshop in zürich for building a small 2 channel mixer/attenuator/offset module.
It's called the VIM - voltage injecting mixer.

Date is the 4. June
Location is the mechatronicartlb in zürich, hohlstrasse 52, 8004
Cost is 90.--

more infos about the module and the event itself can be found on my webpage:
http://seismic.industries/vim
http://seismic.industries/workshops

to signup write an email to workshop{ät}seismic.industries


seismic
workshop is over - and was a success, some minor errors to spot, but else than that all went fine.

10 people now have a VIM in their racks smile

I have some pcbs left and put them in my webshop:
http://seismic.industries/product/vim-diy-kit-voltage-injecting-mixer/

Skumrask
Hey Seismic, I'm waiting for a panel+pcb to arrive and I'm looking through the little BOM. I'm still half illiterate when it comes to parts if there is any chance you could make a cart or post more info?
seismic
Skumrask wrote:
Hey Seismic, I'm waiting for a panel+pcb to arrive and I'm looking through the little BOM. I'm still half illiterate when it comes to parts if there is any chance you could make a cart or post more info?


hey - sry i don't have a cart for that ready, since i usually buy for several projects together. but VIM is easy. you'll have it in no time.
the pots are alpha, but bourns ptv112 work as well and are available from mouser.
Skumrask
I am also about to build a VIM and I can't get access to your website or the BOM. It would be great if there was a BOM list here for redundancy even if you don't make a cart.
seismic
the website is online - why do you have no access?

theres a docu with bom there too.
Skumrask
I'm looking for the BOM but tthe website isn't online. Perhaps you could upload it here for redundancy?
seismic
as said before the website is online.. donno whats wrong.

heres what i cut out:

TL074 U1 1.00 Mouser 511-TL074ACDT SO14 / 595-TL074CPWR TSSOP14
Resistor R8, R9 2.00 2k2 ?
Resistor R5, R7 2.00 10k ?
Resistor R1, R2, R3, R4, R6, R10, R11, R12, R13 9.00 100k ?
Pinhead 10Pole PWR 1.00 Farnell 1593451
Inductor PSU 100nH L1, L2 2.00 100nH Mouser NLCV32T-R10M-PFR
Phonejack IN, IN2, OUT 3.00 Qinpu Electronics
LED D1, D2 2.00 Mouser 1716696 old part 859-LTW-420D7
Capacitor 0805 C3, C4 2.00
CAP PSU C1, C2 2.00 22uF Mouser 667-EEE-FK1C220R
Pot Stereo 50k lin ATV, OFFSET 2.00 50k lin Alpha Taiwan Electronics PTV / RTV 112
MUFF WIGGLER Forum Index -> Music Tech DIY  
Page 1 of 1
Powered by phpBB © phpBB Group