MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Workshop in Zürich: VIM - Voltage Injecting Mixer
MUFF WIGGLER Forum Index -> Music Tech DIY  
Author Workshop in Zürich: VIM - Voltage Injecting Mixer
seismic
Hi folks

i am organizing a workshop in zürich for building a small 2 channel mixer/attenuator/offset module.
It's called the VIM - voltage injecting mixer.

Date is the 4. June
Location is the mechatronicartlb in zürich, hohlstrasse 52, 8004
Cost is 90.--

more infos about the module and the event itself can be found on my webpage:
http://seismic.industries/vim
http://seismic.industries/workshops

to signup write an email to workshop{ät}seismic.industries


seismic
workshop is over - and was a success, some minor errors to spot, but else than that all went fine.

10 people now have a VIM in their racks smile

I have some pcbs left and put them in my webshop:
http://seismic.industries/product/vim-diy-kit-voltage-injecting-mixer/

Skumrask
Hey Seismic, I'm waiting for a panel+pcb to arrive and I'm looking through the little BOM. I'm still half illiterate when it comes to parts if there is any chance you could make a cart or post more info?
seismic
Skumrask wrote:
Hey Seismic, I'm waiting for a panel+pcb to arrive and I'm looking through the little BOM. I'm still half illiterate when it comes to parts if there is any chance you could make a cart or post more info?


hey - sry i don't have a cart for that ready, since i usually buy for several projects together. but VIM is easy. you'll have it in no time.
the pots are alpha, but bourns ptv112 work as well and are available from mouser.
MUFF WIGGLER Forum Index -> Music Tech DIY  
Page 1 of 1
Powered by phpBB © phpBB Group