MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Introducing ADDAC304 Gates & ADDAC305 Latches
MUFF WIGGLER Forum Index -> ADDAC System  
Author Introducing ADDAC304 Gates & ADDAC305 Latches
ADDAC System
We're excited to announce two new modules on our 300 expressive control series. The ADDAC304 Manual Gates and the ADDAC305 Manual Latches are welcome additions to any system requiring hands-on control.



ADDAC304 Manual Gates
The ADDAC304 Manual Gates combines 8 manual gates in a smart package - a perfect way to perform on your modular system. The module comes with an interesting twist: 4 out of the 8 available gates can act as momentary switches, outputting the signals in their respective inputs when each gate’s button is pressed.

Price: 80€
Width: 8 HP
Depth: 2.5 cm
Max current: 10mA
CV inputs: ± 10v
Gate outputs: 0 +5v
http://www.addacsystem.com/product/addac300-series/addac304


ADDAC305 Manual Latches
The ADDAC305 Manual Latches is a combination of 8 manual latching switches in a small and elegant module: each button toggles between Gate high / Gate low when pressed, outputting a 5V gate signal. Additionally 4 of the 8 available latches, sport inputs and can act as manual latching switches, allowing the incoming signal to pass to the output when the button is toggled.

Price: 95€
Width: 8 HP
Depth: 2.5 cm
Max current: 10mA
CV inputs: ± 10v
Gate outputs: 0 +5v
http://www.addacsystem.com/product/addac300-series/addac305
steveoath
Hey @ADDACsystem if building the kit version of the latch module would it be possible to replace the any of the latched switches on outputs 1, 3, 6, 8 with momentary switches?

I'd like to have latches on LFOs/Envelopes and be able to manually fire off a gate to reset stuff.

Cheers,
Steve
ADDAC System
steveoath wrote:
Hey @ADDACsystem if building the kit version of the latch module would it be possible to replace the any of the latched switches on outputs 1, 3, 6, 8 with momentary switches?

I'd like to have latches on LFOs/Envelopes and be able to manually fire off a gate to reset stuff.

Cheers,
Steve


woah Not enough space for both I presume? I don't think that's possible as the switches are different for each type, but I need to double check. I'll get back to you on this.

Just FYI what I do is use the module's switch option (re: the inputs) to get a copy of my main clock and use that as a global reset. That way, I can have everything reset on time, regardless of my timing prowess. Think about it - it works equally great with Toggles as well as Gates.
MUFF WIGGLER Forum Index -> ADDAC System  
Page 1 of 1
Powered by phpBB © phpBB Group