MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Flanger 22K trimmer
MUFF WIGGLER Forum Index -> Oakley Sound Systems  
Author Flanger 22K trimmer
eljay
The builders guide recommends (and indeed the PCB photos show) Bourns 6mm single-turn trimmers. I can't find a 22k value on either Farnell or Rapid where I buy most of my components so is 20K okay? I could use a different type if the value has to be 22k but it's a Feng Shui thing.
Synthbuilder
22K and 20K are interchangeable in my projects.

22K (and 47K) pots and trimmers were mostly from the UK manufacturers while most pots made elsewhere tend to be 20K (and 50K).

Tony
MUFF WIGGLER Forum Index -> Oakley Sound Systems  
Page 1 of 1
Powered by phpBB © phpBB Group