FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 

Troubleshooting field kit build
MUFF WIGGLER Forum Index -> KOMA Elektronik  
Author Troubleshooting field kit build
I need some help figuring out what I did wrong. Kit powers on but the envelope stays activated/ channels three/four on the mixer seem defunct?

Also I’m worried that other shit isn’t acting correctly but I’m not sure where to start or if there is a checklist to make sure it’s working properly.

I’ll post more info when I break it out. Thanks.
hey there,

did you get your field kit working?

if no, share some close-up pics of the board.

good luck very frustrating
I necro'd this thread to ask about this...

Mixer channel 1 isn't allowing a signal in/out. This occurs most of the time since using it yesterday. After a year of happy wiggling.

I haven't dismantled the box because I'm not familiar with PCBs and components. I can solder.

What should I be looking for?

How to trouble shoot this problem?
MUFF WIGGLER Forum Index -> KOMA Elektronik  
Page 1 of 1
Powered by phpBB © phpBB Group