MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Best EQ for feedback noise with distortion
MUFF WIGGLER Forum Index -> Synth Noise  
Author Best EQ for feedback noise with distortion
jbaptiste64
What is the best equalizer for feedback noise?

EQ 3 bands (HI ; MID; LOW)

OR

EQ 3 (HI, HI MID, LOW MID, LOW)

I hesitate between these two mixing tables.

https://www.thomann.de/fr/behringer_xenyx_x1204_usb.htm?ref=search_rsl t_BEHRINGER+XENYX_243148_23

https://www.thomann.de/fr/behringer_xenyx_x1622_usb.htm?ref=search_rsl t_BEHRINGER+XENYX_243140_22
Noisefan
Are you trying to subdue noise or enhance it?

Anyway, more control is probably better but something with sweepstake parametric eq is far more 'playable' than basic low/mid/high.
sutekina bipu-on
I think your priority should be finding something parametric and with overlapping bands so you can cut and boost the same frequency.
TTTTT
you can also try a simple matrix mixer 4x4, very easy to build and lot of feedback exploration..
sexcomputer
also, don't underestimate inserting a graphic eq into your signal chain, there are cheapo pedals and expensive rack mount units and all points in between. oh if i had the time and ability to build all the module ideas i have...
MUFF WIGGLER Forum Index -> Synth Noise  
Page 1 of 1
Powered by phpBB © phpBB Group