MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Serge VCFS behaviour
MUFF WIGGLER Forum Index -> Buchla, EMS & Serge  
Author Serge VCFS behaviour
PacificState
Apologies for posting about the Random Source Euro here, but I presume the behaviour should essentially be the same...

Anyway, I just built a RS VCFS module, and whilst the 3 filter outputs are the same and the frequency knob works, there are a couple of things that don't seem quite right:

- The frequency knob cuts off the sound rather abruptly when almost-fully counter clockwise

- Both the slope and Q knobs have an effect, but only a subtle one; I would have expected something more obvious.

I'm going to check all the solder joints again, but don't have another module to compare it with. Any advice?

Thanks,

Neil
MUFF WIGGLER Forum Index -> Buchla, EMS & Serge  
Page 1 of 1
Powered by phpBB © phpBB Group