MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Introducing ADDAC214 VC Rotator
MUFF WIGGLER Forum Index -> ADDAC System  
Author Introducing ADDAC214 VC Rotator
ADDAC System
What better way to celebrate the new year by announcing our newest module, the ADDAC214 VC Rotator?!?



Direct link to product page


MODULE SPECS
-------------------

6HP
50mA +12V
50mA -12V


DESCRIPTION
-------------------

The VC Rotator is our newest addition for routing audio, CVs, gates and triggers. A typical switch module, like our ADDAC206 can only switch one source to multiple destinations, or multiple sources to one destination.
This can be great if you're messing around with one voice, or one sequence. But what if you want more? Or better yet, what if you want to mess up your drums? Or switch about your audio sources to different processors?

The ADDAC214 solves this elegantly, at merely 6hp. It has four inputs and four outputs, so instead of 4:1 or 1:4, the VC Rotator swaps its 4 inputs to 4 outputs. You can also group it into 2 sections of 2:2.

All four inputs get routed to the four outputs based on the on-board CV and Clock controls. This is indicated in the following four (4) states:
    1. An input is routed to the output with the same number - 1:1, 2:2, 3:3, 4:4

    2. An input is routed to the output with the number offset by 1 - 1:2, 2:3, 3:4, 4:1

    3. An input is routed to the output with the number offset by 2 - 1:3, 2:4, 3:1, 4:2

    4. An input is routed to the output with the number offset by 3 - 1:4, 2:1, 3:2, 4:3


The Direction parameter determines if the Clock input moves the rotation forward or backwards, while the Reset input resets the clock to the first step.

FEATURES
-------------------


4 Inputs
4 Outputs
Direction Switch
4 Monitor LEDs
CV Rotate with Attenuverter
Clock Input
Reset Input


Hit us up if you have any specific questions! SlayerBadger! SlayerBadger!
Paranormal Patroler
It's up on Modular Grid.

https://www.modulargrid.net/e/addac-system-addac214
eremitalf
SUPER interesting. This is gonna be great for generative stuff and modulation.
ersatzplanet
Are these switching to the different outputs or are the fading between different outputs? In other words, what kind, if any, click prevention on the audio switching?
ADDAC System
ersatzplanet wrote:
Are these switching to the different outputs or are the fading between different outputs? In other words, what kind, if any, click prevention on the audio switching?


Hi ersatzplanet, good question! The ADDAC214 contains an analog anti-pop circuit so it should work nicely when switching between audio sources.
ersatzplanet
ADDAC System wrote:
ersatzplanet wrote:
Are these switching to the different outputs or are the fading between different outputs? In other words, what kind, if any, click prevention on the audio switching?


Hi ersatzplanet, good question! The ADDAC214 contains an analog anti-pop circuit so it should work nicely when switching between audio sources.


You should have that front and center on your media about this. That is a VERY salable bullet point when it comes to switches.
MUFF WIGGLER Forum Index -> ADDAC System  
Page 1 of 1
Powered by phpBB © phpBB Group