Muff's Modules & More

mmm · Posted: Sat Jul 03, 2010 3:44 pm Post subject: MMM Quad-Quad sale

I was going to call it a Tesseract sale but, a Tesseract is a cubed-cube. We're going one dimension further Rockin' Banana!

Here's some data to reference while you read:
Q=QuAD /ASR Envelope Generator PLUS Quad VCA

A= 4 X Gate Delay
http://mmm.sevcom.com/wiki/index.php/4x_Gate_Delay_Board
B= 4 X Mixer (not VC)
http://mmm.sevcom.com/wiki/index.php/4x_Mixer_Board
C= 4 X Buffered Mult
http://mmm.sevcom.com/wiki/index.php/4x_1x2_Buffer_Board
D= VC Mixer
http://mmm.sevcom.com/wiki/index.php/Voltage_Controlled_Mixer_Board
E= VC Dual LFO
http://mmm.sevcom.com/wiki/index.php/Voltage_Controlled_Dual_LFO_Board

F= QuAD /ASR EG
http://mmm.sevcom.com/wiki/index.php/QuAD_/ASR_Envelope_Generator_Boar d
G= Quad VCA
http://mmm.sevcom.com/wiki/index.php/Quad_Voltage_Controlled_Amplifier _Board

The sale:

The sale will consist of four kits of assembled/ tested boards, including appropriate wire kits and power cables of choice.

The core will be the QuAD /ASR EG kit and Quad VCA kit. That will start the order number sequence with a Q

The next two letters will be your choice to fill out the four-board order. i.e: the core kits with a VC Mixer kit and 4X Gate Delay kit would be:
QDA.

After the order designation will be a hyphen followed by the power cable of choice. i.e. -4 for 4-pin to 4-pin 0.156 MTA, -6 for 6pin to 6-pin 0.100 MTA or -E for 4-pin 0.156" to Euro 2x8 header.

If you want to daisy chain a pair of modules and you're going to be sourcing them through the 4-pin cable, use a /6 after your power cable choice of a -4 or -E. I'll provide two of your preferred cables and two 6-pin to 6-pin cables as a common power cable for two boards.

So, the above example with a 4-pin power connector selection that you want to combine boards on a single panel would be:
QDA-4/6

The quad-kits are now on sale until midnight PDT Sunday, July 11, 2010 for $399.00

Shipping for a maximum four kits via USPS priority mail is $4.95 domestic or $13.50 outside of the USA.

The best "bang-for-buck" for this sale would be to double up.
So, the QQ works best if you feel you need 8 AD's and 8 VCA's but:

srsly never

If you want to add additional kits or, just grab some while the grabbing is good, the individual sale price during this period is:

A: 4 X Gate Delay kit= $ 95.90
B: 4 X Mixer kit= $ 94.50
C: 4 X Buffered Mult kit= $ 91.75
D: VC Mixer kit $ 99.50
E: VC Dual LFO kit $111.50
F: QuAD /ASR EG kit $106.90
G: Quad VCA kit $104.90

Since this is a MW-only sale. You'll have to PayPal direct to my PP address of mattsonminimodular(at)comcast(dot)net

I can fit up to four kits in a small, flat-rate USPS box. So, please include appropriate shipping for the box quantity required.

***Edit***
Oh, yeah. When you order, don't forget to include your MW username.
***end edit***

Thanks Guys. You're great!!! applause

giorgio · Posted: Sat Jul 03, 2010 4:41 pm Post subject:

maybe it is just me but this is very confusing/not enough info. but maybe that's cause I don't have a MMM system, and am used to euro/5U/keyboards..

what is in these kits? pcb? components? stuffed? pots? panels? I looked on the links provided but didn't see any else marked as a kit there.

maybe I'm just missing something???

thanks/peace

sandyb · Posted: Sat Jul 03, 2010 4:59 pm Post subject:

giorgio · Posted: Sat Jul 03, 2010 5:04 pm Post subject:

not sure how that relates to this sale. tell me

sandyb · Posted: Sat Jul 03, 2010 5:11 pm Post subject:

giorgio · Posted: Sat Jul 03, 2010 5:16 pm Post subject:

so "kit", in this thread, = "assembled board"?? I'm just confused at to what is being offered above, but the world may never know.. (until mr matson sees the progress of this thread) very frustrating

sandyb · Posted: Sat Jul 03, 2010 5:23 pm Post subject:

giorgio · Posted: Sat Jul 03, 2010 5:31 pm Post subject:

awesome thanks for putting it down straight for all the dummies out there like myself

mmm · Posted: Sat Jul 03, 2010 5:36 pm Post subject:

giorgio · Posted: Sat Jul 03, 2010 5:40 pm Post subject:

george to the super-rescue. thanks.

i like what you doing.

mmm · Posted: Sat Jul 03, 2010 5:53 pm Post subject:

klstay · Posted: Mon Jul 05, 2010 2:17 am Post subject:

Nooooooo! My wife is going to kill me; I already need to come up with a payment to State Machine for a stuffed Quad Bass++ board...

The problem is I have also been lusting after about half of these REAL bad and after all, a sale is a sale, right?

BananaPlug · Posted: Mon Jul 05, 2010 8:42 am Post subject:

Giorgio, these MMM kits are so satisfying. It's more FIY (finish it yourself) than DIY so if you're feeling bogged down by the pace of your DIY projects, it could be just the thing to put the wind back in your sails. Boat

The boards are tiny too which gives you a lot of flexibility for mounting to panels.

Adam-V · Posted: Mon Jul 05, 2010 8:02 pm Post subject:

I agree; the FIY thing makes for a good break from the total DIY thing. Just mount the board and panel components, then solder the ends of the connector cables to their respective panel components and plug them in!

Cheers,
Adam-V

mmm · Posted: Wed Jul 07, 2010 10:51 am Post subject:

Just a quick note,

I finally built one of the Quad VCA boards and it works... thumbs up

George

negativspace · Posted: Wed Jul 07, 2010 11:37 pm Post subject:

mmm · Posted: Fri Jul 09, 2010 9:59 am Post subject:

Just a reminder that the sale ends at midnight PDT (GMT-7) on Sunday.

I've been playing with the Gate Delay--->QuAD /ASR--->Quad VCA--->VC Mixer chain and having a ball.

Now, I want another chain... d'oh!

Modulars are addictive little SOB's

G

ach_gott · Posted: Fri Jul 09, 2010 11:47 am Post subject:

I'll be putting in my order at the beginning of next month. I'm broke until then. Don't take my delayed order as a lack of interest! Mr. Green

mmm · Posted: Sun Jul 11, 2010 1:51 am Post subject:

Reminder that the Quad-Quad sale will end at midnight PDT (GMT-7) on Sunday (tomorrow) July 11.