MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

MOS-LAB 921-a to 921-b interface.
MUFF WIGGLER Forum Index -> 5U Format Modules  
Author MOS-LAB 921-a to 921-b interface.
dopefiend
Hi,

Anybody know how the oscillator driver controls the VCO’s on the Mos-Lab system? Is it like the bus that comes in the power distributor, like the Doepfer?

Thanks!!
Mark11Audio
dopefiend wrote:
Hi,

Anybody know how the oscillator driver controls the VCO’s on the Mos-Lab system? Is it like the bus that comes in the power distributor, like the Doepfer?

Thanks!!


Yes, the power distro board that Sebatien sends with the 901A/BBB Set has the driver connections within the ribbon cables... it's why he gave me so many when I had [4] sets of 901A/BBB and 921A/BBB each was required to have it's "own" dedicated power board.

Where as the COTK has a multi-head single ribbon cable that jumpers behind all [4] modules directly connecting them.

Hope that helps. thumbs up
dopefiend
Thanks, man!!! thumbs up
dopefiend
And if anybody out there happens to have one or 2 extra power busses you might want to sell, please let me know. hyper
Synthoholic
I have a couple of extras.
MUFF WIGGLER Forum Index -> 5U Format Modules  
Page 1 of 1
Powered by phpBB © phpBB Group