MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

New Oakley PCB available - Looping ADSR & VCA
MUFF WIGGLER Forum Index -> 5U Format Modules Goto page 1, 2  Next [all]
Author New Oakley PCB available - Looping ADSR & VCA
Synthbuilder
I've upgraded our popular ADSR module and changed it a bit:

1. Added looping capabilities with gated and continuous modes.

2. As requested - builders have the option of having the raw un VCA'd ADSR output available. You can still have the inverted version of the VCA output if you wish instead.

3. 16mm pots instead of Vishay 248

4. Dotcom power supply headers.

More information:

http://www.oakleysound.com/adsr.htm

Scott should be doing some panels for these in our usual 5U format, but we are hoping to have these available in Mu Mu as well.

Tony
suitandtieguy
looks great!
analogsteve
Synthbuilder wrote:
Scott should be doing some panels for these in our usual 5U format, but we are hoping to have these available in Mu Mu as well.


This is exciting news!
SepticUnderground
Great!!
sduck
Excellent! I may need some of those...
kindredlost
Synthbuilder wrote:
... but we are hoping to have these available in Mu Mu as well.


I've been wearing my MuMu a lot lately so this is really good news.

Style over substance - I always say.
essex sound lab
Excellent update!

Synthbuilder wrote:
but we are hoping to have these available in Mu Mu as well.


I would be in for a pair.
emdot_ambient
thumbs up Looking way groovy! Rasta-nana
wyrtti
Wonderful! This looks like a real joy. As if the old design wasn't good already. Thank you, from a lower of sloooowww envelopes. Cthulhu Om
fluxmonkey
i've got a pair of the original designs (behind a double frac panel), they are my go-to ADSRs. fantastic design, now even better.
Neutron7
Very cool, Ill ahve to get a couple of these.

by the way will the CV helper module be able to control 2 ADSR modules?
pugix
A very nice enhancement to an already great module! applause I have four of the former version, two fully VC, and I use them all frequently.
synthetic
Yeah, MOTM appears to be a dead format. :(
Synthbuilder
Thanks for all the nice comments chaps.

Neutron7 wrote:
by the way will the CV helper module be able to control 2 ADSR modules?


No, it will only control one ADSR module at any one time.

Tony
Synthbuilder
synthetic wrote:
Yeah, MOTM appears to be a dead format. :(


I hope not. But the interest in mu mu versions of our modules has certainly been noticed by us. However, I'll be continuing to develop modules that will fit into MOTM panels for the foreseeable future. This generally means that they'll be able to be ported into mu mu without too much hassle. The other way around is not so easy since mu mu offers greater width and less adherence to any sort of grid. Although I've been tweaking the grid in my modules for a while now.

Tony
krisp14u
SO MOTM as a format is DEAD!!!!
Must remember to tell all the guys who keep buying stuff from me
Do Paul. S and Scott. D know? lol

The move to Include MU-MU Modules from Oakley Sound Systems is due to allot of peer pressure from the Guys in MU-MU Land
It is also to increase sales so me and Tony look our wives angry in the eye at the end of the financial year and not get a good SMACK! oops

But not to replace any format

The New Looping ADSR/VCA will make it to both formats as soon as we have Panels

I know Scott D is working on the MOTM format panel (cheers Buddy) love

And this is going to press with my panel guys as I type

nerdware
I have 4 Dotcom rack frames waiting to be filled with Oakley MU modules. thumbs up Of course, it'll take me years to do that, but at least I'm prepared. hyper The new ADSR will surely be one of those modules! Thanks.

BTW - that's a very tasty panel! w00t
essex sound lab
krisp14u wrote:


And this is going to press with my panel guys as I type



Excellent! I'll work on freeing up some space for a few. thumbs up
doctorvague
Looks great!
Henfield
Krisp1 - That panel looks great!!

My MU Equinoxe Phaser is one of my favorite modules, is extremely well built, and looks great!

An ADSR in MU with looping capabilities and VCA built-in sounds like another winner as well!

Porting over some of the Oakley Filter Modules into 1U MU format would be great as well. STG seems to be the only manufacturer making MU format filters in a 1U design, we need more!
sduck
synthetic wrote:
Yeah, MOTM appears to be a dead format. :(


It's not dead, it just smells funny.

No, not dead, but maybe almost so comparatively speaking sales-wise. The format has two big problems - 1. it's the perfect format for DIY-ers, like myself, who have little or no need to buy pre-made modules and 2. there's been very little cool new stuff from the main player(s) in a long time. These two factors are probably interconnected.

Anyway, there're a lot of motm systems out there, but whether or not that number continues to grow - probably not.
JohnLRice
synthetic wrote:
Yeah, MOTM appears to be a dead format. :(


eek!

f u

razz

Mr. Green

MOTM FTFW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! screaming goo yo SlayerBadger! hyper hihi 8_) applause It's peanut butter jelly time!
wyrtti
Does the new Looping VCA/ADSR work with the existing CV-ADSR board? Ie. could one already make a looping CV-ADSR/VCA, or does that need some changes in the CV board?

CV of A and D while looping... hyper hyper hyper hyper hyper hyper woah
bsmith
sduck wrote:

It's not dead, it just smells funny.


Roxy & Elsewhere
synthetic
Hey I like MOTM format too. But how many modules released in that format in the last three years, compared to MU, compared to Euro? I know Paul has new stuff 'right around the corner...' I know my next cabinet will be MU.
MUFF WIGGLER Forum Index -> 5U Format Modules Goto page 1, 2  Next [all]
Page 1 of 2
Powered by phpBB © phpBB Group