When using the pulse out from 281e to a S&H channel on 267e, sometimes after a while the S&H will only sample high voltage levels and refuse to sample lower voltage levels. This seems to occur with no changes to the level of variation of the FRV being sampled, and with no changes to the timing or duration of pulses from the 281e. The S&H can be unstuck sometimes by fiddling with the knobs on the FRV section of the 267e, or by removing and then re-patching the 281e pulse into the 267e’s S&H, from either or both ends.
Do others have this experience?
Want to get your thoughts before I post to the bug thread. Maybe I'm doing something wrong.
... br> br>