MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

DIY Clap'a'Trap ** Assembly Results & Trigger Update ***
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page Previous  1, 2, 3, 4, 5, 6, 7  Next [all]
Author DIY Clap'a'Trap ** Assembly Results & Trigger Update ***
rosch
Well the knobs are a perfect match for the jacks and the buttons to be honest, so if it's possible to get only the bare board i'll find a way to mount the thing perpendicular to a ghetto panel
is that 0603?
Boogie

rosch
Quote:
so if it's possible to get only the bare board

Why only the board ? You will need different potmeters, but those aren't enclosed in the kit anyhow, only the knobs, neither are the jacks.
Only PCB, NE566 and the knobs.

toneburst
Quote:
Any updates on this project?

Good news, the project is still active.
I've been a bit less active on the Forum,
but as soon we reach 25 pcs, I'll start the redesign.

Clap'a'trap interested list.

I'll start the redesign of the Clap'a'Trap as soon as the total of Kit_1 + Kit_2 reaches 25.

Kit 1 cost €41.20 excl vat and excl shipping
1 x Bare PCB
1 x NE566
8 x knobs (2 Red, 4 Yellow, 2 white) stripe

Kit 2 cost €80.50 excl vat and excl shipping
1 x Kit 1
1 x Black anodized FP with white overlay from Schaeffer


1 tommy.york 1 x Kit_2
2 Swyndger 1 x Kit_2
3 realitycontrol 1 x Kit_2
4 Dunk_91 1 x Kit_2
5 tron23 1 x Kit_2
6 toneburst 1 x Kit_2
7 makhho 1 x Kit_2
8 keninverse 1 x Kit_2
9 keninverse 1 x Kit_2
10 supervalued 1 x Kit_2
11 supervalued 1 x Kit_2
12 rbv2 1 x Kit_2
13 Faustgeist 1 x Kit_2
14 stringsthings 1 x Kit_2
15 aragorn23 1 x Kit_2
16 yan6. 1 x Kit_2
17 mOBiTh. 1 x Kit_1
18 maltemark 1 x Kit_2
19 magneticstripper 1 x Kit_2
20 Branko 1 x Kit_2
21 NS4W 1 x Kit_2

Who is going to be nr. 22 ? Rockin' Banana!
rosch
Boogie wrote:

Why only the board ?

i have other switches, jacks and knobs. i only need a board. so if that's possible i would consider it. is it 0603?
Boogie
rosch
Quote:
is it 0603

yes.
Quote:
i only need a board. so if that's possible

It's not foreseen for now, but one never knows.
NS4W
So I guess "bump" then hmmm.....
kamielsd
22
Boogie
hello all,

22 or 25,
I'll start the update of the design.
Pls allow a couple weeks for it to finish.

So these boards will be produced.


1 tommy.york 1 x Kit_2
2 Swyndger 1 x Kit_2
3 realitycontrol 1 x Kit_2
4 Dunk_91 1 x Kit_2
5 tron23 1 x Kit_2
6 toneburst 1 x Kit_2
7 makhho 1 x Kit_2
8 keninverse 1 x Kit_2
9 keninverse 1 x Kit_2
10 supervalued 1 x Kit_2
11 supervalued 1 x Kit_2
12 rbv2 1 x Kit_2
13 Faustgeist 1 x Kit_2
14 stringsthings 1 x Kit_2
15 aragorn23 1 x Kit_2
16 yan6. 1 x Kit_2
17 mOBiTh. 1 x Kit_1
18 maltemark 1 x Kit_2
19 magneticstripper 1 x Kit_2
20 Branko 1 x Kit_2
21 NS4W 1 x Kit_2
22 kamielsd 1x Kit_2

for those who are interested,
price setting below

Kit 1 cost €41.20 excl vat and excl shipping
1 x Bare PCB
1 x NE566
8 x knobs (2 Red, 4 Yellow, 2 white) stripe

Kit 2 cost €80.50 excl vat and excl shipping
1 x Kit 1
1 x Black anodized FP with white overlay from Schaeffer
Boogie
Hello all,

Here's a new soundfile of the Clap'a'Trap with external Control Voltage on the Hiss Pitch.
The unit is triggered by an external trigger pulse which is also used to start an external ADSR. The ADSR is then used to controll the Hiss Pitch.
Controll Voltage dynamic range is 0-5V, possible to go up to 7V for very high pitches.

Who will be nr. 23 ?

[s]http://soundcloud.com/boo-gie-879149310/vchisspitch[/s]

Interest List

1 tommy.york 1 x Kit_2
2 Swyndger 1 x Kit_2
3 realitycontrol 1 x Kit_2
4 Dunk_91 1 x Kit_2
5 tron23 1 x Kit_2
6 toneburst 1 x Kit_2
7 makhho 1 x Kit_2
8 keninverse 1 x Kit_2
9 keninverse 1 x Kit_2
10 supervalued 1 x Kit_2
11 supervalued 1 x Kit_2
12 rbv2 1 x Kit_2
13 Faustgeist 1 x Kit_2
14 stringsthings 1 x Kit_2
15 aragorn23 1 x Kit_2
16 yan6. 1 x Kit_2
17 mOBiTh. 1 x Kit_1
18 maltemark 1 x Kit_2
19 magneticstripper 1 x Kit_2
20 Branko 1 x Kit_2
21 NS4W 1 x Kit_2
22 kamielsd 1x Kit_2

for those who are interested,
price setting below

Kit 1 cost €41.20 excl vat and excl shipping
1 x Bare PCB
1 x NE566
8 x knobs (2 Red, 4 Yellow, 2 white) stripe

Kit 2 cost €80.50 excl vat and excl shipping
1 x Kit 1
1 x Black anodized FP with white overlay from Schaeffer
kamielsd
kit1 that would be, i'm still budgetary restricting myself from buying metal panels at least till I run out of trespa
Boogie
Hey kamielsd

I've updated the list.

Who will be nr 23 ?


Interest List

1 tommy.york 1 x Kit_2
2 Swyndger 1 x Kit_2
3 realitycontrol 1 x Kit_2
4 Dunk_91 1 x Kit_2
5 tron23 1 x Kit_2
6 toneburst 1 x Kit_2
7 makhho 1 x Kit_2
8 keninverse 1 x Kit_2
9 keninverse 1 x Kit_2
10 supervalued 1 x Kit_2
11 supervalued 1 x Kit_2
12 rbv2 1 x Kit_2
13 Faustgeist 1 x Kit_2
14 stringsthings 1 x Kit_2
15 aragorn23 1 x Kit_2
16 yan6. 1 x Kit_2
17 mOBiTh. 1 x Kit_1
18 maltemark 1 x Kit_2
19 magneticstripper 1 x Kit_2
20 Branko 1 x Kit_2
21 NS4W 1 x Kit_2
22 kamielsd 1x Kit_1

for those who are interested,
price setting below

Kit 1 cost €41.20 excl vat and excl shipping
1 x Bare PCB
1 x NE566
8 x knobs (2 Red, 4 Yellow, 2 white) stripe

Kit 2 cost €80.50 excl vat and excl shipping
1 x Kit 1
1 x Black anodized FP with white overlay from Schaeffer
Dan Michaels
applause

Nr 23, Kit 2 please

Thx
toneburst
Voltage control of hiss pitch is a great feature!
maltemark
ironically, hisspitch is Swedish for "elevator pitch"
mOBiTh
If it's not too late I'd like to switch to kit two please!

What's the current status of this project?
Boogie
maltemark wrote:
ironically, hisspitch is Swedish for "elevator pitch"

Would that reaction imply that you are active in aviation ? cool
mOBiTh wrote:
If it's not too late I'd like to switch to kit two please!

I'll update the list. Pls see below.
Quote:
What's the current status of this project?

I have to update the Hiss decay to Voltage controlled and then update the PCB.
But it's coming.

Interest List

1 tommy.york 1 x Kit_2
2 Swyndger 1 x Kit_2
3 realitycontrol 1 x Kit_2
4 Dunk_91 1 x Kit_2
5 tron23 1 x Kit_2
6 toneburst 1 x Kit_2
7 makhho 1 x Kit_2
8 keninverse 1 x Kit_2
9 keninverse 1 x Kit_2
10 supervalued 1 x Kit_2
11 supervalued 1 x Kit_2
12 rbv2 1 x Kit_2
13 Faustgeist 1 x Kit_2
14 stringsthings 1 x Kit_2
15 aragorn23 1 x Kit_2
16 yan6. 1 x Kit_2
17 mOBiTh. 1 x Kit_2 Updated
18 maltemark 1 x Kit_2
19 magneticstripper 1 x Kit_2
20 Branko 1 x Kit_2
21 NS4W 1 x Kit_2
22 kamielsd 1x Kit_1
23 Dan Michaels 1 x Kit_2

for those who are interested,
price setting below

Kit 1 cost €41.20 excl vat and excl shipping
1 x Bare PCB
1 x NE566
8 x knobs (2 Red, 4 Yellow, 2 white) stripe

Kit 2 cost €80.50 excl vat and excl shipping
1 x Kit 1
1 x Black anodized FP with white overlay from Schaeffer
mOBiTh
[quote="Boogie"]
Quote:
What's the current status of this project?

I have to update the Hiss decay to Voltage controlled and then update the PCB.
But it's coming.

Splendid cool

BTW: why is it called Clap 'a' Trap instead of just Clap Trap?
Boogie
@rosch
I confirmed it is 0603, but forgot to mention that apart from 1 SOIC16 all opamps are TSSOP14 or TSSOP8. Those have a pitch of 0.65mm.

mOBiTh wrote:
What's the current status of this project?

Well,
I've been working on it for a bit this afternoon.
Both Hiss Pitch and Decay are now Voltage Controllable 0-5V.

Using external voltage for the decay allows to variate the decay time from some 160 ms to more then 20 seconds. The on-board knob still varies with respect to the original timings.

Next step is to update the schematics and redesign the PCB. (it's more then adding a resistor or so)

So while waiting for the PCB to be redesigned and tested,
Here's already a sample.

[s]https://soundcloud.com/boo-gie-879149310/voltagecontrolledhiss[/s]
Boogie
mOBiTh
Quote:
BTW: why is it called Clap 'a' Trap instead of just Clap Trap?

There are both a digital and analog version.
The 'a' stands for Analog.
It also differentiates the Clap'a'Trap from the original Clap Trap, as it is a clone, but with some slight differences.
The Clap'a'Trap is a hint to the Clap trap, but is not an exact copy. hihi
mOBiTh
Fair enough, sounding good! cool
pirx
Cool project. 1 x Kit_1 for me, please. Thank you!
Boogie
@pirx, I've added you to the list

And nr25 is going to be ? spinning

Both Hiss Pitch and Decay are now Voltage Controllable 0-5V.

Using external voltage for the decay allows to variate the decay time from some 160 ms to more then 20 seconds. The on-board knob still varies with respect to the original timings.

Quote:
Next step is to update the schematics and redesign the PCB. (it's more then adding a resistor or so)

Schematics and PCB are updated.
I will run a final check and order a new proto batch this weekend.


So while waiting for the new proto PCB to arrive,
I've added the soundfile again.

[s]https://soundcloud.com/boo-gie-879149310/voltagecontrolledhiss[/s]

Interest List

1 tommy.york 1 x Kit_2
2 Swyndger 1 x Kit_2
3 realitycontrol 1 x Kit_2
4 Dunk_91 1 x Kit_2
5 tron23 1 x Kit_2
6 toneburst 1 x Kit_2
7 makhho 1 x Kit_2
8 keninverse 1 x Kit_2
9 keninverse 1 x Kit_2
10 supervalued 1 x Kit_2
11 supervalued 1 x Kit_2
12 rbv2 1 x Kit_2
13 Faustgeist 1 x Kit_2
14 stringsthings 1 x Kit_2
15 aragorn23 1 x Kit_2
16 yan6. 1 x Kit_2
17 mOBiTh. 1 x Kit_2
18 maltemark 1 x Kit_2
19 magneticstripper 1 x Kit_2
20 Branko 1 x Kit_2
21 NS4W 1 x Kit_2
22 kamielsd 1x Kit_1
23 Dan Michaels 1 x Kit_2
24 pirx 1x Kit_1

for those who are interested,
price setting below

Kit 1 cost €41.20 excl vat and excl shipping
1 x Bare PCB
1 x NE566
8 x knobs (2 Red, 4 Yellow, 2 white) stripe

Kit 2 cost €80.50 excl vat and excl shipping
1 x Kit 1
1 x Black anodized FP with white overlay from Schaeffer
toneburst
Looking and sounding great!
Keep up the great work, @Boogie!
Boogie
Hello all,

Schematics are updated.
PCB is redesigned with the Voltage Controll update.
BOM and Silkscreen are extracted.

New batch of proto PCBs will be ordered later today or tomorrow.

For those who already want to create an assembly document (coloring the the Reference Designators according to the value of the component),
I've already put the silkscreen and BOM in attachment.
Where this screen dump may not be so clear, the PDF in attachment is very well readable.

Boogie
Dear MuffWiggler colleagues,

I'm accepting orders for the Clap'a'Trap Kits.

In attachment is the order form I need as a confirmation for your order.

Don't pay anything yet, you'll get a request for payment and a commercial invoice when all parts are in.

The order book will be closed on november 5th, that's two weeks after today. (should be long enough)
I will also then order the necessary Frontpanels.

Even if the total of orders is below 10, I will still process and supply.

B rgds,
Boogie
Boogie
Hello all,

just a kind reminder.

Orders will only be accepted till november 5th.
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page Previous  1, 2, 3, 4, 5, 6, 7  Next [all]
Page 4 of 7
Powered by phpBB © phpBB Group