MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Plumbutter 2: The Man with the Red Steam
MUFF WIGGLER Forum Index -> Ciat-Lonbarde  
Author Plumbutter 2: The Man with the Red Steam
SPIKE the Percussionist
New PB2 owner as of today...

Need a bit of help...or really a question answered.

When connecting from the Pulse Sequencer everything will trigger at their Green inputs when fed from the Orange trigger outputs.

When I connect the Red trigger outputs the AVDogs will NOT trigger however, everything else will when connected to the Red outs.

Is there something wrong or am I missing something here?

Thanks for any help!
horaflora
From the Tips and Tricks part of the plumbutter manual:

“what is the difference between the red and orange jacks in the Man with Red Steam? Also it seems that only the orange ones will trigger the avdogs (not the red), is this correct? The red jacks are pulse outputs, suitable for jerking brown geometries or triggering gongs. The orange jacks are more like square waveforms that reflect the state of the sequencer at that point. Since AVDog is triggered by slow resonances, it will respond better to the orange jacks because they have more "meat" on them, when on, rather than being a quick pulse.”
SPIKE the Percussionist
horaflora wrote:
From the Tips and Tricks part of the plumbutter manual:

“The red jacks are pulse outputs, suitable for jerking brown geometries or triggering gongs. The orange jacks are more like square waveforms that reflect the state of the sequencer at that point. Since AVDog is triggered by slow resonances, it will respond better to the orange jacks because they have more "meat" on them, when on, rather than being a quick pulse.”


THANK YOU!!!!!!!!!!!!
MUFF WIGGLER Forum Index -> Ciat-Lonbarde  
Page 1 of 1
Powered by phpBB © phpBB Group