MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Building a VCO1 as designed by Thomas Henry
MUFF WIGGLER Forum Index -> Music Tech DIY  
Author Building a VCO1 as designed by Thomas Henry
mlatu
So, I finally got the parts, after designing the PCB Layout using KiCAD.

Thought I would share pictures of the build process.

https://imgur.com/a/rmtRyNk

PCB is done (i.e. prepared), doesn't look pretty, next time I'll try the toner heat transfer method.
I could also try and dye the PCB to get it coloured more evenly, I guess.

I added about two dozen jumper wires, more tomorrow.
MUFF WIGGLER Forum Index -> Music Tech DIY  
Page 1 of 1
Powered by phpBB © phpBB Group