MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Folktek Luminist Garden repair (need help)
MUFF WIGGLER Forum Index -> Music Tech DIY  
Author Folktek Luminist Garden repair (need help)
julien
Hi,

A friend of mine ask me if I can repair a broken Folktek Luminist Garden, the kind of"brass switch" is broken, the wire inside are desoldered from the pcb and i don't know where to resolder.
Folktek can repair but It costs to much to send the Luminist from France to US.
So I'll try to repair but i need the help from some owner? If you can send me some pics of the inside connection, specially the location of the 3 wires form the brass connector to the blue pcb. Your help would be welcome.

Julien
ClausF
Hi Julien,
I have a few photos from the inside, that I can send you via PM. Just send me your email. If this is not enogh, I can make some more at the Weekend.
Cheers
dubstephead
Shouldn't be to hard to figure out. I would just take a picture of the inside and send it to Folktek asking where to solder. I've had my Illuminist Garden repaired by Folktek before and they are alway's very helpful.
MUFF WIGGLER Forum Index -> Music Tech DIY  
Page 1 of 1
Powered by phpBB © phpBB Group