MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Anyone want a Northern Light 2TT solder paste stencil?
MUFF WIGGLER Forum Index -> Buchla, EMS & Serge  
Author Anyone want a Northern Light 2TT solder paste stencil?
tarandfeathers
I'm building a 2TT in the next month or so and am going to order a stencil to make the build easy. Once I'm done with it I won't really need it any longer so if anyone wants it and is prepared to pay for shipping from the UK to wherever they are (won't be much, it's about the size of an A4/legal letter) let me know.

Daniel
Boofin Moonrocks
I'd be interested if you are willing to ship to the U.S.
tarandfeathers
Sure, I'm waiting for some stuff (including the stencil) to come in. Once I have it I'll work out what the postage cost would be and let you know.
jaidee
Just to express my interest also - I'm up the road in Newcastle upon Tyne.
jaidee
Just to express my interest also - I'm up the road in Newcastle upon Tyne.
tarandfeathers
Ah cool, maybe we can organise some sort of round robin? It's a stainless steel stencil so will be good for quite a few uses.
Boofin Moonrocks
It'll be awhile until I get to building the 2tt, so jaidee can go first.
Rowan
I’d also be interested in a round robin. I’m in Glasgow and in no hurry.
ArguZ
One thing you guys want to check first..
I just came across an old test version floating around for some reason.
So i would check that first before sending it around.

The PCB needs to read "Model 2TT.2.8 DIY"
If it does not it might not work well.
tarandfeathers
For what it's worth, that's the designation on the PCB I have, and of the board files I used to create the gerber for the stencil.
tarandfeathers
Useful notes for building this:

The BOM links to a 0.96" OLED, but the panel cutout is for a 1.3" module, so don't order the one linked in the BOM. I have looked at a few OLEDs, I can't find anything that matches my requirements that isn't a China/eBay item so I won't post links until I have some and verified that they are okey but generally speaking what you need for the OLED is:

1.3" diagonal display, 128x64 resolution
SSD1306 driver chip
SPI interface, pinout:
1. GND
2. VCC (3.3V)
3. SCK
4. MOSI
5. RES
6. DC
7. CS

I've seen some that have the GND and VCC connections reversed so double check before buying!
ArguZ
oops...sorry if that is still in there...

Here is your Uk source :

https://hobbycomponents.com/displays/621-3-sh1106-uoled-display-module -white?search_query=HCMODU0058&results=1
keninverse
I'm interested as well if this makes it stateside.
MUFF WIGGLER Forum Index -> Buchla, EMS & Serge  
Page 1 of 1
Powered by phpBB © phpBB Group