MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

902 diode bridge
MUFF WIGGLER Forum Index -> 5U Format Modules  
Author 902 diode bridge
leonardo
I'm going on with my project of cloning the moog model 55, and I'm working around the 902 VCA at present.

Does anybody have any information about the diode bridge called DBI (or perhaps DB1) in the schematic; type, specs etc. ? Maybe can it be implemented with 4 common diodes ?

Thank you all

Cheers from Italy
Leonardo
lasesentaysiete
You can use 4 1N4148, or use a diode bridge chip. I am not positive of what model # for the chip, but something like this: https://www.mouser.es/ProductDetail/Rectron/DB107?qs=G5AQjGfRJcLGAY%25 2B6bEDnbw==&vip=1&gclid=Cj0KCQjwiILsBRCGARIsAHKQWLN1goMeJ7HZ-csepHEAQn Z_g5t5V4iXEZRuID5ljf_hfk_dD_nXB-MaAh5CEALw_wcB
MUFF WIGGLER Forum Index -> 5U Format Modules  
Page 1 of 1
Powered by phpBB © phpBB Group