Welcoming 2011 first modules!

New Interfaces for Analog Synthesizers.

Moderators: Kent, infradead, __ag

Post Reply
User avatar
__ag
Wiggling with Experience
Posts: 287
Joined: Thu Feb 18, 2010 5:17 pm
Location: Portugal

Welcoming 2011 first modules!

Post by __ag » Thu Jan 06, 2011 10:49 am

Hello all,

Happy New Year!
:)

i've been talking about this modules for a while now, so here they are:

Image

ADDAC203 CV MAPPING (in Stock!)
2 independent channels with Attenuator & Offset controls
80€*

ADDAC501 Complex Random (now with clock gate input) **
Complex Random with Brownian function
230€*

ADDAC501B Expansion
with Variable Glide function + Normal and Inverted Gate Outputs
100€*

ADDAC502 Lissajous Curves **
2 independent XY Lissajous Curves with MIN/MAX & Speed Controls
4 independent Outputs with 10 possible average combinations, ex:
X1
X1+X2
X2 + Y1 + Y2
X1 + X2 + Y1 + Y2 ...
270€*

ADDAC502B Expansion
with Normal and Inverted Gate Outputs
100€*

ADDAC801 Simple Mixer
3 Channel Mixer
80€*

ADDAC802 CV Audio Mixer
with 5 VCA channels
and 1 VCA Mixdown Output
150€

ADDAC900 Bus Board
2 Styles with IDC Boxed Headers or Pinout Header
30€*

ADDAC901 3U Frame
EuroRack 3U Poplar Frame
130€*

*prices are still subject to change

Pre-orders available!

**this are the prototype panels, as you might notice, some engravings are not final. Also, because i'm changing the jacks i've been using, the Complex Random and Lissajous Curves have some holes bigger than they should be.
All this will be corrected in the first batches!


Soon i'll post more info and demo videos!

all the very best
andre
You do not have the required permissions to view the files attached to this post.

User avatar
Carci
Veteran Wiggler
Posts: 603
Joined: Tue Nov 23, 2010 7:55 am
Location: Paris - France

Post by Carci » Thu Jan 06, 2011 11:02 am

Nice,

What's the offset range on the ADDAC203 CV MAPPING ?
TURTLE project : http://vimeo.com/23648701
http://www.facebook.com/TURTLEPROJECT

FS : Doepfer MCV24 - Eowave Ringobug - Cwejman PH4 and more eurocrack
https://www.muffwiggler.com/forum/viewt ... 30#3046530

User avatar
__ag
Wiggling with Experience
Posts: 287
Joined: Thu Feb 18, 2010 5:17 pm
Location: Portugal

Post by __ag » Thu Jan 06, 2011 11:05 am

hello,
the CV Mapping offset range is 10V
best
andre

User avatar
Nuuj
A$$ Wiggler
Posts: 2166
Joined: Thu Jul 16, 2009 2:55 pm
Location: Rochester, NY USA

Post by Nuuj » Thu Jan 06, 2011 11:09 am

__ag wrote:hello,
the CV Mapping offset range is 10V
best
andre
Is it Bipolar?
https://rnuuja.bandcamp.com/album/this- ... oepuss-phd
https://soundcloud.com/r-nuuja
http://www.facebook.com/are.nuuja
http://rnuuja.tumblr.com/

vqlk: "...so seriously - this a forum dedicated to discussing each other's really lame and un-extreme modular synths??!"

User avatar
__ag
Wiggling with Experience
Posts: 287
Joined: Thu Feb 18, 2010 5:17 pm
Location: Portugal

Post by __ag » Thu Jan 06, 2011 11:12 am

Sure!
bipolar and all analog no digital tricks here.

User avatar
Carci
Veteran Wiggler
Posts: 603
Joined: Tue Nov 23, 2010 7:55 am
Location: Paris - France

Post by Carci » Thu Jan 06, 2011 11:44 am

So offset is +5V -5V right ?
And it's an attenuator, not a polarizer right ?
(Exactly what I would need then !)


Some really good utility modules there, :tu:

The lissajou looks cool too ! I like the output mode selection switch, quite unique. What was the idea behind this design ? Is it made for any specific use ? I'd love to try it to control the output levels of a quadriphonic sound system, should be really interesting.
TURTLE project : http://vimeo.com/23648701
http://www.facebook.com/TURTLEPROJECT

FS : Doepfer MCV24 - Eowave Ringobug - Cwejman PH4 and more eurocrack
https://www.muffwiggler.com/forum/viewt ... 30#3046530

User avatar
nrdvrgr
Working at NASA on acid
Posts: 3561
Joined: Tue Dec 29, 2009 5:17 pm
Location: Wermland, Sweden

Post by nrdvrgr » Thu Jan 06, 2011 11:49 am

Could you please explain what Lissajous Curves means?
Very intrigued, but I don´t quite get it function/potential...
-Extendunt barbam tuam, et velo-

WEBSITE: http://www.nordvargr.com
BUY/LISTEN: http://nordvargr.bandcamp.com
VIDEO: http://vimeo.com/nrdvrgr

User avatar
__ag
Wiggling with Experience
Posts: 287
Joined: Thu Feb 18, 2010 5:17 pm
Location: Portugal

Post by __ag » Thu Jan 06, 2011 12:15 pm

Offset is -10v +10v
also works as a constant voltage source between -1+ +10v if nothing is plugged in!
if you send -5 +5v and offset it to the right you'll get +5 +10v, because it hit the rails on +10v


Lissajous curves are hard to explain in short
better take a look at wikipedia:
http://en.wikipedia.org/wiki/Lissajous_curve
:)
i'll post some videos soon with the modules and oscilloscope

best
a

User avatar
attacksustain
Ultra Wiggler
Posts: 985
Joined: Fri Oct 24, 2008 12:40 pm
Location: Boston, MA

Post by attacksustain » Thu Jan 06, 2011 1:09 pm

Lissajous curves as a modulation source sound like they could be a lot of fun.

Looking forward to seeing a video on that one.

User avatar
suboptimal
A Towering Mediocrity
Posts: 4713
Joined: Tue Apr 07, 2009 11:04 pm
Location: San Diego

Post by suboptimal » Thu Jan 06, 2011 2:03 pm

The Lissajous module is compelling, and looks rad, too. Neat stuff.

User avatar
tomcat
Common Wiggler
Posts: 107
Joined: Fri Mar 12, 2010 8:48 am

Post by tomcat » Thu Jan 06, 2011 4:01 pm

Would need a few busboards. Available when?

User avatar
__ag
Wiggling with Experience
Posts: 287
Joined: Thu Feb 18, 2010 5:17 pm
Location: Portugal

Post by __ag » Thu Jan 06, 2011 4:47 pm

Bus boards will be available next week!

User avatar
sonicwarrior
Super Deluxe Wiggler
Posts: 3815
Joined: Tue Sep 29, 2009 3:36 pm
Location: Cologne, Germany

Re: Welcoming 2011 first modules!

Post by sonicwarrior » Sat Jan 08, 2011 3:44 pm

__ag wrote: ADDAC900 Bus Board
2 Styles with IDC Boxed Headers or Pinout Header
30€*
Are the screw holes compatible with the Doepfer boards?

Looks like they are. If so: Bought! (with IDC Boxed Headers)
Soundcloud
For sale: Jürgen Haible Tau Phaser (MOTM format)

User avatar
__ag
Wiggling with Experience
Posts: 287
Joined: Thu Feb 18, 2010 5:17 pm
Location: Portugal

Post by __ag » Sat Jan 08, 2011 3:47 pm

Yes, holes are compatible!

User avatar
dougcl
Number 6
Posts: 4021
Joined: Sat Jul 26, 2008 3:04 am
Location: Portland OR

Post by dougcl » Sat Jan 08, 2011 3:52 pm

Prettiest stuff in euro IMO.

User avatar
sonicwarrior
Super Deluxe Wiggler
Posts: 3815
Joined: Tue Sep 29, 2009 3:36 pm
Location: Cologne, Germany

Post by sonicwarrior » Sat Jan 08, 2011 4:04 pm

__ag wrote:Yes, holes are compatible!
Yeah! You just saved me some work (and money). :tu:
Soundcloud
For sale: Jürgen Haible Tau Phaser (MOTM format)

User avatar
hawklord2112
Generally and Specifically
Posts: 996
Joined: Sun Feb 07, 2010 11:45 am
Location: deepest darkest devon, in the UK

Post by hawklord2112 » Thu Jan 13, 2011 1:55 pm

Lissajoux curves and complex randoms... oh be still my beating heart!
:goo: :goo:
stk wrote:Hawklord IS the Annoying Checkout Guy!!!!1111
nrdvrgr wrote:Hawklord IS the Annoying Synth Neighbor!
Image

Post Reply

Return to “ADDAC System”