Twitter   Patreon WIGGLING 'LITE' IN GUEST MODE

Information
 FINALLY! I believe I have gotten to the bottom of the invalid session and logout issues. Please continue to report your own experience in the appropriate threads in the "Forum Discussion and Requests" subforum. Thank you all for your patience and support! <3

 Goto page 1, 2  Next [all]
Carci
 Any news ? A video demo would be much appreciated !
lionelfischer
__ag
 I'll try to have one up soon! time is my worst enemy!
lionelfischer
 doesnt have to be a video demo
ws9848
__ag
 More info will be up soon! i've completely finished the module, need to start production and add the documentation online. all the very best andre
__ag
 there's a new video online: all the very best andre
__ag
 Hello, i have just finished the first 2 units of the first batch of the ADDAC502 Lissajous Curves, it comes in red! more info: This module features 2 XY VC Lissajous Curves with 4 Independent CV Outputs Voltage output is centered, like seen in the video voltage goes up and down from a center point, the Voltage output range is selected through a jumper, 2 options: 0 +5V -> centered around 2.5V 0 +10V -> centered around 5V Controls: Manual Control for the X1 Maximum Radius CV/Manual Control for the Y1 Maximum Radius Manual Control for the X2 Maximum Radius CV/Manual Control for the Y2 Maximum Radius CV/Manual Speed Control for Curve 1 & 2 10 Position encoder for defining each channel MODE MODES This function makes some maths according to each Lissajous Curve and Axis, mixing each X's and Y's 0 = Y1 1 = Y2 2 = (Y1 + Y2) /2 3 = (X1 + Y1) /2 4 = (X2 + Y2) /2 5 = (X1 + X2) /2 6 = (X1 + Y1 + Y2) /3 7 = (X2 + Y1 + Y2) /3 8 = (X1 + X2 + Y2) /3 9 = (X1 + Y1 + X2 + Y2) /4 it's almost ready to go let me know if anyone interested! price 250Ã¢â€šÂ¬ There's also the ADDAC502B Expansion with 8 gate outputs, 2 per channel (inverted and non-inverted) generating gate signals for when the curve crosses the center point. all the very best andre
mystico
 Is anybody using this module who would like to share some experiences?
mafouka
 Does the CV input on Liss 1/2 X/Y work with a clock beep input or does it need a wave from an LFO to work ?
__ag
 Hello, The X & Y are for the Maximum value or voltage amplitude of the generated curves/lfo's. So they don't need any lfo to work, in fact it's a complex lfo generator itself, it uses 4 lfos to generate complex modulation curves, which when paired can be used as Lissajous Curves The other settings are Speed control for each individual lfo Meanwhile we've developed a new version so the panel in the thread is outdated, posting a new picture below, this picture also have a couple typos: the top 2 cv/knobs should state X&Y amplitude, which are now together the next 4 cv/knobs, as above mentioned, are for the Speed of each independent lfo. Also the name has changed to Ultra Lissajous all the very best andre
DonKartofflo
 hot damn! you guys always know how to get my gas going!
Paranormal Patroler
 DonKartofflo = ADDAC fanboy I am one as well.
blinosynth
__ag
 Hello all, Finnally we're ready to announce the Version 2 of the Lissajous Curves, now titled Ultra Lissajous. here's all about it: http://addacsystem.com/product/addac500-series/addac502-lissajous-curv es all the very best andre
Paranormal Patroler
 Andre you've got at least four killer modules out there.
DonKartofflo
 Paranormal Patroler wrote: DonKartofflo = ADDAC fanboy I am one as well.

Damn right gimme that portuguese modular pr0n!
burnn_out!
 Fuckk.. is the expander going to be available as well? Great stuff man
Leisure Cove
 Really excited about this module You could have this, a Marble Physics and a Nchunk Control in a Beauty Case and be pretty much set for a while. ADDAC is on a roll!
bj_gzp
 Leisure Cove wrote: Really excited about this module You could have this, a Marble Physics and a Nchunk Control in a Beauty Case and be pretty much set for a while. ADDAC is on a roll!

You may risk a smoking Mini PSU if you try that
BJ
Leisure Cove
bj_gzp wrote:
 Leisure Cove wrote: Really excited about this module You could have this, a Marble Physics and a Nchunk Control in a Beauty Case and be pretty much set for a while. ADDAC is on a roll!

You may risk a smoking Mini PSU if you try that
BJ

GOOD CALL!
warnton
 about the frequency (=velocity?) what is the range? does it reach audio? how slow is slowest??
mafouka
 how can this module be clocked with an external trigger?
Paranormal Patroler
 mafouka wrote: how can this module be clocked with an external trigger?

Hmm, good question. I don't think you can, except if there's something to be done with the CV inputs for Amplitude & Velocity.
dj_bluefalcon
 Quote: I am one as well.

I know how you feel.
 Goto page 1, 2  Next [all] Page 1 of 2