Author |
E340/E350 DIY kits available for immediate shipment |
br>paults |
br>I have finished making up the E340 and E350 kits. Those who have placed orders will see 'happy emails' by tomorrow.
I have 2ea E340 kits and 3 E350 kits not spoken for.
They are $250 US, $275 foreign. They DO NOT include faceplate, pots, jacks or knobs. That's the DIY part. Free shipping.
Please email me at synth1@airmail.net if interested. br> br> |
|
br>guitarfool |
br> br> br> |
|
br>paults |
br>As of this instant 1 E340 and 1 E350 kit left. br> br> |
|
br>patchdub |
br>no monies now. will you be doing this again in the near future? br> br> |
|
br>wmonk |
br>
emailed for a e350 br> br> |
|
br>paults |
br>a) all kits sold, thanks
b) I wil have more in about 6 weeks. I am making another 200 of these modules, buying parts this weekend. Takes ~ 2 weeks for parts to arrive, 3-4 weeks for the assembler to SMT place & solder, 1 week for me to organize them.
I usually set 10ea aside from the 200 sets for the DIYers, rest are made into full modules.
The E340s took longer this first time, I had work/family issues and moved, got laid-off from RIM but hired yesterday by TI. What a world...... br> br> |
|
br>pugix |
br>My E430 kit came yesterday and I built it today.
I made one wiring mistake, reversing the top and center wires on the CHAOS pot. Before I figured it out and fixed it, the module seemed a little more chaotic than I expected, especially since turning the pot all the way down resulted in little else but noise from the output.
Haven't had enough time to put up a post on pugix.com. Will do it soon. br> br> |
|
br>essex sound lab |
br> pugix wrote: | My E430 kit came yesterday and I built it today.
|
Richard, do you have a 5U panel design for the E340? Sorry if I missed it.
Gordon br> br> |
|
br>pugix |
br>The FPE panel I used for the E340 is similar to the one for the E350.
http://pugix.com/synth/synthesis-technology-morphing-terrarium/
Same 1U layout, but instead of the second toggle switch I have an attenuator pot for the Spread CV input.
The build was almost identical to the E350. I made my own bracket this time and used different pots. This time I used #24 stranded for the panel wiring, which is just physically easier than #22, because of the cramped space. br> br> |
|
br>wmonk |
br>Arrived today in the Netherlands.
Thanks for the great and fast service Paul! br> br> |
|
br>synthetic |
br> pugix wrote: | http://pugix.com/synth/synthesis-technology-morphing-terrarium/
|
Is that a four-pin power supply? I thought it would be a MOTM six-pin jack (in addition to Euro ribbon). br> br> |
|
br>sduck |
br>It comes with both a standard motm 4 pin and a euro connection. br> br> |
|
br>davebr |
|
br>JohnLRice |
br> Great job, Dave! br> br> |
|
br>Funky40 |
br> paults wrote: | I have finished making up the E340 and E350 kits. Those who have placed orders will see 'happy emails' by tomorrow.
I have 2ea E340 kits and 3 E350 kits not spoken for.
They are $250 US, $275 foreign. They DO NOT include faceplate, pots, jacks or knobs. That's the DIY part. Free shipping.
Please email me at synth1@airmail.net if interested. |
do you have E350 Kits in stock Paul ? or when +- br> br> |
|
br>simfonik |
br>
very nice! br> br> |
|
br>SepticUnderground |
br>
Wow magnificent looks! br> br> |
|
br>elsound77 |
br> Funky40 wrote: | paults wrote: | I have finished making up the E340 and E350 kits. Those who have placed orders will see 'happy emails' by tomorrow.
I have 2ea E340 kits and 3 E350 kits not spoken for.
They are $250 US, $275 foreign. They DO NOT include faceplate, pots, jacks or knobs. That's the DIY part. Free shipping.
Please email me at synth1@airmail.net if interested. |
do you have E350 Kits in stock Paul ? or when +- |
i m interested for a E 350 5u with attenuators 8_) br> br> |
|
br>decaying.sine |
br> elsound77 wrote: | Funky40 wrote: | paults wrote: | I have finished making up the E340 and E350 kits. Those who have placed orders will see 'happy emails' by tomorrow.
I have 2ea E340 kits and 3 E350 kits not spoken for.
They are $250 US, $275 foreign. They DO NOT include faceplate, pots, jacks or knobs. That's the DIY part. Free shipping.
Please email me at synth1@airmail.net if interested. |
do you have E350 Kits in stock Paul ? or when +- |
i m interested for a E 350 5u with attenuators 8_) |
You'll have to DIY that! There is also an expander panel for euro. br> br> |
|
br>paults |
br>Maybe I should propose that if I can get 30 people to pay $100 deposit, I could run these as 'real' products and not DIY.
PM if you are up for it (DO NOT SEND $$$ just ping me). br> br> |
|
br>decaying.sine |
br>You mean the attenuators and jumper to front panel, Paul? br> br> |
|
br>davebr |
br>I decided I needed a laser for my Morphing Terrarium. I have my first pass prototype working but I still need to make a few mechanical tweaks.
I put some photos and a video on my laser page.
Dave
br> br> |
|
br>jenamu6 |
br>Wow......what laser is that?
How much....where did you buy......I want. br> br> |
|
br>Cat-A-Tonic |
br> davebr wrote: |
I put some photos and a video on my |
That looks awesome.
If the video frame was centered it would be even better.
Lazers have no way of doing a Z input, do they?
...as in vector scanning I mean. br> br> |
|
br>jenamu6 |
br> jenamu6 wrote: | Wow......what laser is that?
How much....where did you buy......I want. |
Oops clicked the link and found my answers.....too difficult for me.
Are there any ready to use and not costing a fortune solutions? br> br> |
|