If now only there where a standard for those wall rails

Not sure I go so far as calling this a recommendation. But this is how I ended doing it. wallrails.jpg Mounted wall rails on all four walls with the intention to use standard brackets with my keyboards. Plan where to angle the keys by simply build up the shelf on the rear. That idea proved to be my ...

Started my music jurney listening to british rock bands like Queen, Sabbath, Purple, Zeppelin, Sweet, Slade, Nazareth, J Priest. Funny thing where when Queen stated on the record cover No synthesizer used on this record we kids misunderstood the meaning and took it as a call to hate all music using ...

Also worth taking notice of are that XLR connector do not always imply balanced signal where intended. I have a few vintage pieces where the XLR connector seem to be implemented only for the locking function and professional look.

We still wonder what this will become

Maybe OP should edit 1. post with relevant information about the need to mix AND control individual voltages?

Cost. Aluminium are MUCH cheaper

PhineasFreak wrote: ↑

Tue Mar 17, 2020 12:22 pm

this ties in with my suspicion that the generative setup is going to sue me for royalties on the music it composed...

When it does tell it someone beat it to it

Hi. I have a Beaststep Pro which I like and dislike for a variety of reasons, but one of the best things about it is this: When editing the pitch of a step while the sequence is stopped, the BSP plays the note whenever you turn the knob, giving you audible feedback as to what note you have entered ...

Not being able to bend the connector sleeve would it not make more sense to measure actual cable?

If you buy a PSU with certification it only applies to that product as sold, not to anything it is connected to. If somebody sells a synth, case, laptop or whatever with an external bought in PSU that is a new product that requires retesting and certification. You can't inherit the certification of...

mkasthe wrote: ↑

Tue Mar 17, 2020 8:47 am

ACL Sinfonion - so much that thing can do!

Yes. How could I forget about that one?

I think problems arise from certification has be be done with an given PSU with secondary guaranteed to be insulated from mains. And with a power brick this can't be done. Switch mode PSUs still have mains transformers that have to be insulated. They are just not so noticeable because they work at ...

Rails are not designed to be electrically conductive. Surface treatment of rails and faceplate most often isolate them.
Still for good messure I like to ground mine

Well technically you still can use passive. But you need a 10k to 47k resistor on each of the cables or jack inputs on the passive mult.

Edit: Search passive mixer https://duckduckgo.com/?q=passive+mixer

Correct grounding can never be achieved using an external brick and a dc barrel jack. That is why if you see a dc jack on the outside it doesn't matter what is on the inside, it's just not going to do the job properly. Is a secondary mains plug with only GND wired an effective work-around? (Given t...

Correct grounding can never be achieved using an external brick and a dc barrel jack. That is why if you see a dc jack on the outside it doesn't matter what is on the inside, it's just not going to do the job properly. Is a secondary mains plug with only GND wired an effective work-around? (Given t...

For triggers you can use a passive mult.

That one are for guitar players.

red wrote: ↑

Mon Mar 16, 2020 5:23 am

erica synths !





classic black

KSS wrote: ↑

Sun Mar 15, 2020 7:32 pm

When I saw this photo, our thread title came to mind

Funny. But not so sure Uli actually aim for membership. He is intelligent enough to understand he need to make original products to be able to apply.

MM-1000 Money Printer. When mounted and up running I have all of Dave Rossum modules thank you. Then ER-101/102 thinking all those 7 digit LED displays makes me look smarter making precise & intelligent music.

Building guitar stomp boxes a decade earlier the transition to build eurorack modules seems rather seemless. But as with my effect units missing nice enclosure and faceplates made them live in the backlog drawer s where I also have TTSHv1 and ASM2. But I guess it all started with Moogerfooger 101 fi...

francoprussian wrote: ↑

Sat Mar 14, 2020 2:41 pm

Found a way to sort that annoying DB25 cable sticking out from the rack:

Nice, any source for that angle connector? Might fit Voyager extension boxes as well.

Neo wrote: ↑

Thu Mar 12, 2020 4:25 pm

...where the extra CV inputs..

this is a far too often overlooked feature. Yes one can mult and make similar functionality but the simple fact one don't have to work as an open invitation to patch input one else wouldn't bother to explore.