Search found 56 matches

by lucringeisen
Fri Jul 05, 2019 4:15 am
Forum: ADDAC System
Topic: Introducing ADDAC803 Quadraphonic Spatializer
Replies: 47
Views: 13701

Also, is AUDIO IN 2 just summing with AUDIO IN 1 ? or are they treated as a stereo input ?
by lucringeisen
Fri Jul 05, 2019 3:44 am
Forum: ADDAC System
Topic: Introducing ADDAC803 Quadraphonic Spatializer
Replies: 47
Views: 13701

Re: helppp please !

filter +- outs are CV outputs that on spatialization algorithms are used to add reverb or low pass when the sound get further away from the center. it's close to what bjorn mentions but the best way to do it is to send the audio source to be spatialized through a a VC reverb or LPF before feeding i...
by lucringeisen
Sat Jun 29, 2019 5:18 am
Forum: ADDAC System
Topic: Introducing ADDAC803 Quadraphonic Spatializer
Replies: 47
Views: 13701

helppp please !

filter +- outs are CV outputs that on spatialization algorithms are used to add reverb or low pass when the sound get further away from the center. it's close to what bjorn mentions but the best way to do it is to send the audio source to be spatialized through a a VC reverb or LPF before feeding i...
by lucringeisen
Fri May 31, 2019 1:35 am
Forum: Eurorack Modules
Topic: 2HP oscillator (opinions?)
Replies: 33
Views: 5734

Derp wrote:I just ordered two of the VCO's. No idea how slow it can go, but as far as "how analog" it is, the selling point for me is that these tiny oscillators are rocking CEM3340's. If you like the CEM sound (Pro One in particular), you should like these as well.
so, how do you like them ?
by lucringeisen
Mon Jan 21, 2019 1:55 am
Forum: General Gear
Topic: DI Dox vs Transformer Barrel Adaptors for modular synths ?
Replies: 20
Views: 1085

Finally, it seems there is also some power supply issue going on (I am using cheap multiple power sockets, can it be one of the problems cause ?). For ex. I just unplugged from power socket the ERM multiclock, and like half of the total hum went away (hum was happening even if multiclock was trund o...
by lucringeisen
Mon Jan 21, 2019 1:23 am
Forum: Eurorack Modules
Topic: Reasonable Cwejman prices..?!
Replies: 101
Views: 6507

Cwejman is expensive and not justify! what justifies for you might not be what justify for others. I mean if you are into new, modern pure analogue sound, they so, so justified. if you are not, they are not, of course. its a subjective thing isnt it they are (for me), the best when it comes to anal...
by lucringeisen
Mon Jan 21, 2019 12:05 am
Forum: General Gear
Topic: DI Dox vs Transformer Barrel Adaptors for modular synths ?
Replies: 20
Views: 1085

I did find a 269 service manual and had a quick look - it looked like it had separate inputs for mic and line (guess they're both on XLR?) both of which go through input transformers - so I would think that adding another transformer would be overkill. Can you try the Euro setup into some other sor...
by lucringeisen
Sun Jan 20, 2019 11:42 pm
Forum: Modular Synth General Discussion
Topic: Balanced outputs and inputs from modular to audio interface?
Replies: 41
Views: 12474

right now trying out those 3 devices to eliminate the "hum" induced by my mod. synth = Radial JDI, WMD PRO OUT and Intellijel AUDIO INTERFACE. The Radial DI works perfectly, totally eliminates the noise. But the WMD and the Intellijel do not seem to have any effect on the hum, it is the same than g...
by lucringeisen
Sun Jan 20, 2019 5:14 am
Forum: Modular Synth General Discussion
Topic: Balanced outputs and inputs from modular to audio interface?
Replies: 41
Views: 12474

right now trying out those 3 devices to eliminate the "hum" induced by my mod. synth = Radial JDI, WMD PRO OUT and Intellijel AUDIO INTERFACE. The Radial DI works perfectly, totally eliminates the noise. But the WMD and the Intellijel do not seem to have any effect on the hum, it is the same than g...
by lucringeisen
Sun Jan 20, 2019 4:13 am
Forum: Modular Synth General Discussion
Topic: Balanced outputs and inputs from modular to audio interface?
Replies: 41
Views: 12474

right now trying out those 3 devices to eliminate the "hum" induced by my mod. synth = Radial JDI, WMD PRO OUT and Intellijel AUDIO INTERFACE. The Radial DI works perfectly, totally eliminates the noise. But the WMD and the Intellijel do not seem to have any effect on the hum, it is the same than go...
by lucringeisen
Sun Jan 13, 2019 12:50 am
Forum: Eurorack Modules
Topic: High end output/ quality DI
Replies: 41
Views: 2995

Now that the Vermona TAI-4 has been on the market for a few years can anyone tell a bit more precisely how those transformers compare to the Jensen's ? are they really in the same league ? if so is there a winner though ?
by lucringeisen
Sat Jan 12, 2019 2:26 am
Forum: General Gear
Topic: DI Dox vs Transformer Barrel Adaptors for modular synths ?
Replies: 20
Views: 1085

No way, I just found out about those balancing output modules !! can't beleive I didn't know they exist WMD: https://www.schneidersladen.de/en/wmd-pro-output.html?fbclid=IwAR3hkNjdiNd3JCYA4QlRaPo6qaxoYWjiNS3Ma7J8qHbGR7Qt8W4mJ9nXmbI Intellijel: https://www.schneidersladen.de/en/intellijel-designs-aud...
by lucringeisen
Fri Jan 11, 2019 5:34 pm
Forum: General Gear
Topic: DI Dox vs Transformer Barrel Adaptors for modular synths ?
Replies: 20
Views: 1085

Not really knowing the 269 (or internal designs) - what input are you going to? Is there 1/4" Line or XLR Mic? I'd imagine there are input transformers in there. XLR only Does the Studer have a correct 3pin earthed power cable & used in a properly earthed wall plug? Yes for the cbale. Good question...
by lucringeisen
Fri Jan 11, 2019 3:59 pm
Forum: Music Software
Topic: quadraphonic wav files player ?
Replies: 14
Views: 2068

Dilibob wrote:I have gone 5.1 on everything I do, lot of options on playing it. Realistically the 5.1 normally only has something in the quad channels.
Please let us know about those options !! BTW I just found out Youtube plays multichannel too
by lucringeisen
Thu Jan 10, 2019 3:27 am
Forum: Buchla, EMS & Serge
Topic: Mods: Please close ! Thank you.
Replies: 52
Views: 4045

Hi Shawn, to sum up: - if Roman takes Buchla's modules for which Buchla / Don himself, whoever invested in R&D, panel design etc to clone their modules to make profit = totally fine in every aspect (ethics etc) - if someone else now clones Romans clones = bad idea, the devil will get me. To me it s...
by lucringeisen
Thu Jan 10, 2019 3:06 am
Forum: General Gear
Topic: DI Dox vs Transformer Barrel Adaptors for modular synths ?
Replies: 20
Views: 1085

I echo the advice to look into the reason of the hum, though - especially if you are calling it a "high end modular" :hihi: Cheers :guinness: Thanks ! Ho yes, Cwejman !! though lately some digital bitbox modules and more came in the rack. any hint about where I should start please ? I admit this hu...
by lucringeisen
Wed Jan 09, 2019 4:04 pm
Forum: General Gear
Topic: DI Dox vs Transformer Barrel Adaptors for modular synths ?
Replies: 20
Views: 1085

Shure Barrel adapters are good. I've used those before. I've also seen folks buy the raw transformers from Jensen, Sowter, Lundahl etc and just zip tie them to a rack panel, and terminate them appropriately. This is kind of tedious and only saves you money if you are doing 4+ channels. It's much ea...
by lucringeisen
Wed Jan 09, 2019 3:58 pm
Forum: General Gear
Topic: DI Dox vs Transformer Barrel Adaptors for modular synths ?
Replies: 20
Views: 1085

I echo the advice to look into the reason of the hum, though - especially if you are calling it a "high end modular" :hihi: Cheers :guinness: Thanks ! Ho yes, Cwejman !! though lately some digital bitbox modules and more came in the rack. any hint about where I should start please ? I admit this hu...
by lucringeisen
Tue Jan 08, 2019 11:58 am
Forum: General Gear
Topic: DI Dox vs Transformer Barrel Adaptors for modular synths ?
Replies: 20
Views: 1085

milkshake wrote:For trafo's, stick to the 3 well known: Lundahl, Sowter and Jensen.

17dBu is needed for modular levels, I think.

Wide bandwidth trafo's that can handle that level are about €100 each.
The Radial has Jensen. Thanks for the info will check the dBu's
by lucringeisen
Tue Jan 08, 2019 3:36 am
Forum: General Gear
Topic: DI Dox vs Transformer Barrel Adaptors for modular synths ?
Replies: 20
Views: 1085

... I'd slightly wonder why hum was occurring - it might be a cabling issue which doesn't actually require a DI - and I always wonder whether DIs (which typically take line level down to mic) are necessary vs. a 1:1 ratio line matching transformer (if that's the right terminology)... I agree. Would...
by lucringeisen
Tue Jan 08, 2019 3:35 am
Forum: General Gear
Topic: DI Dox vs Transformer Barrel Adaptors for modular synths ?
Replies: 20
Views: 1085

... I'd slightly wonder why hum was occurring - it might be a cabling issue which doesn't actually require a DI - and I always wonder whether DIs (which typically take line level down to mic) are necessary vs. a 1:1 ratio line matching transformer (if that's the right terminology)... I agree. Would...
by lucringeisen
Tue Jan 08, 2019 1:30 am
Forum: General Gear
Topic: DI Dox vs Transformer Barrel Adaptors for modular synths ?
Replies: 20
Views: 1085

DI Dox vs Transformer Barrel Adaptors for modular synths ?

Hi ! just bought a dual radial JDI to plug my (high end, Cwejman) modular synth into my Studer 269 console. It cancels the hum like it should and thats basically all I need ( the console can handle all kind of levels coming in in a very wide range so the hum and noise cancelation is pretty much all ...
by lucringeisen
Fri Nov 02, 2018 12:47 am
Forum: Music Software
Topic: quadraphonic wav files player ?
Replies: 14
Views: 2068

The main problem with Quad content distributed as a product for others to play on their home systems (unlike live quad) is that there are very limited number of people with a true quad system. Surround Sound is not Quad . The rear speakers in almost every surround system made are NOT the same as th...
by lucringeisen
Fri Nov 02, 2018 12:35 am
Forum: Music Software
Topic: quadraphonic wav files player ?
Replies: 14
Views: 2068

I think I found a working one, installing right now, its called KODI
by lucringeisen
Thu Nov 01, 2018 2:10 am
Forum: Music Software
Topic: quadraphonic wav files player ?
Replies: 14
Views: 2068

if you have a quad or 5.1 setup, most media players should playback quad wav files. thanks for helping ! what do you measn exactly by quad set up ? I only do have a multichannel soundcard .. when opening quad files in Audacity it opens a 4 channel mixer but the output is stereo and it does not seem...

Go to advanced search