Search found 236 matches

by seismic
Mon Oct 26, 2020 11:26 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

rygloon wrote:
Sat Oct 24, 2020 1:37 am
Has 1hp ant farm been suggested yet? Only big enough for 1 ant.. 1 sad & lonely ant.

Confession.. i didn't read every single post
that sounds like pure evil . poor ant
by seismic
Sat Oct 24, 2020 5:39 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

TT as in Teletype? In 8hp? Is this for real? Also, there is no miniaturisation trend. That was something that happened when Intellijel first started out, and it stopped after a few years. What you see is people wanting to have small cases to carry at gigs. It's a different problem, part of the solu...
by seismic
Sat Oct 24, 2020 12:31 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

to be honest about all the miniaturisation trend: i also do my tries & errors in this area. 2nd-last thing i layouted was the zerORAC, a TT within 8HP, possibly running ORAC. -> but i see it as a challenge on how to layout a HUI that small. i am still nowhere in this area, but hope to gain experienc...
by seismic
Sat Oct 24, 2020 12:27 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

Maybe a 1hp ‚glitched‘ multiple? Just like the Bastl Wackelkontakt. You plug the cables not completely in and they are somewhat loosely hanging in the slots, so it comes that some signals get lost. Sounds silly and it is i think😂 i have one of the wackelkonakt'z, in my rack since 2016 :) that is wh...
by seismic
Fri Oct 23, 2020 12:01 pm
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

VU, or headphone output? ....have an HPO and trying to get between jacks to adjust volume can be a pain even at 2hp! But say VU or photodiodes with seismic’s prepatching jumper could be rad... 1hp expanders to a more sensible input/output. But also feels like a more complicated solution than any ‘p...
by seismic
Fri Oct 23, 2020 11:56 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

Bigger panels for the 2hp ant the picos :) nice one!

But i think this trend is less or more over. Eurorack is still a small formfactor but at least people want more space now
by seismic
Fri Oct 23, 2020 1:48 am
Forum: Music Tech DIY
Topic: terminal tedium (raspberry zero, pi2, pi3 codec / pd thing)
Replies: 929
Views: 114302

Re: terminal tedium (raspberry zero, pi2, pi3 codec / pd thing)

hmm, maybe someone with experience with the WM8731 can help out here: i try to DC couple the output of the codec, as i'd love to generate some X/Y data for my ILDA laser.. Screenshot 2020-10-23 at 08.41.00 1.png i added an offset so the output swing should be +/- 5V when 0-3.3V comes from the WM8731...
by seismic
Thu Oct 22, 2020 11:18 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

I donno, but i think there are pretty slim plugs around. Personally the tiny-mania makes not really sense to me, and i also dont like it. I like space! I like flat/shallow designs :) but so far i am alone in that district.. I kinda just wanted to make an example and reflect the trend in eurorack to ...
by seismic
Thu Oct 22, 2020 6:06 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

PSU2 ordered, great for small portable case! thank you!! it's packed and will be soon on it's way. Some 1hp ideas, taking into account ability to have scroll wheel thingies and jacks: * single Stages segment: use two scrolls wheels instead of pot and slider. Stages can be chained up to modules, so ...
by seismic
Thu Oct 22, 2020 6:04 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

Jacks won't fit in 1HP. It's only .200" 5mm wide and a plug tip is .138" 3.5mm Oh, thought seismic found jacks that would work.... Is there rules of 1hp that can be listed (and then broken)? yes - there is one that should fit. (untested..) CUI_DEVICES_SJ-3502-SMT-TR but it'll need a full cutout on ...
by seismic
Wed Oct 21, 2020 2:39 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

KSS wrote:
Wed Oct 21, 2020 1:50 am
Thank you.
Apologize if I've missed it in the thread already. What's the amps capability per rail?
+700mA / -400mA
by seismic
Tue Oct 20, 2020 11:37 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

KSS wrote:
Tue Oct 20, 2020 11:22 am
Thank you.
So what's the intended use case for this?
powering "small" racks. 42hp 84hp and the like
by seismic
Tue Oct 20, 2020 11:16 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

If the logo were moved to the right, the metal could be thermally coupled to the chip -not ideally, but better than free air? Maybe you were going for convective cooling? What are the current specs? <--see what Idid there? ;) the metal is not for cooling in this case.. the chip has a thermal pad un...
by seismic
Tue Oct 20, 2020 11:12 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

KSS wrote:
Tue Oct 20, 2020 10:55 am
:tu:

That's some real fine work, seismic!
thanks - i hope it'll get some DIYer attention.
by seismic
Tue Oct 20, 2020 9:06 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

it's on!!

1HP powersupply (optionally 0HP when used without panel:

http://seismic.industries/psu2/

DIY:
psu2_diy_whitened.jpg
Assembled:
psu2_assembled_whitened.jpg
by seismic
Thu Oct 15, 2020 11:45 pm
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

thats how thing look inside the case..
pleae don't judge the dirty modules!!
IMG_9018.jpg
by seismic
Thu Oct 15, 2020 11:20 pm
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

i mounted the bare metal thing into my case, and that gave it a lot more strength. :) i like. there is another module on the adjacent right side and nothing on the left side. my case is milled from solid aluminium and thus has fairly "slim rails", so maybe a common case will be even helping here a l...
by seismic
Thu Oct 15, 2020 10:32 pm
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

Sheetmetal parts came in today. Looking good! I like the twist-lock tabs. :tu: Though I'd still prefer to see a longer main bend with shorter extensions for the rails. Since the tabs -and part- are laser cut, there's no reason not to do so. Still worried about flexing bending in use due to top and ...
by seismic
Thu Oct 15, 2020 9:57 am
Forum: Music Tech DIY
Topic: terminal tedium (raspberry zero, pi2, pi3 codec / pd thing)
Replies: 929
Views: 114302

Re: terminal tedium (raspberry zero, pi2, pi3 codec / pd thing)

Looking for the gerbers for the tt on the GitHub and the link is broken. Does anyone have the files or at least willing to take a screenshot of the board? seconding this request! they are where they ever where: https://github.com/mxmxmx/terminal_tedium/blob/master/hardware/gerbers/wm8731/terminal_t...
by seismic
Thu Oct 15, 2020 9:55 am
Forum: Music Tech DIY
Topic: terminal tedium (raspberry zero, pi2, pi3 codec / pd thing)
Replies: 929
Views: 114302

Re: terminal tedium (raspberry zero, pi2, pi3 codec / pd thing)

messed up the quote thing... sry

see below..
by seismic
Thu Oct 15, 2020 9:44 am
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

Sheetmetal parts came in today.
By monday i should ahve the elctronics here and be ready for a test..


3D81CC22-65D7-465C-919E-8251ACD584CF.jpeg
by seismic
Mon Oct 12, 2020 2:23 pm
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

grey_costume wrote:
Mon Oct 12, 2020 2:17 pm
best of luck :sstorm:
änks - this time it has no shutdown jacks. so that part of shit storm is avoided.. i hope industry 4.0 or so has landed at the sheetmetal guys fabric
by seismic
Mon Oct 12, 2020 2:13 pm
Forum: Eurorack Modules
Topic: hilarious 1HP modules / ideas
Replies: 178
Views: 4381

Re: hilarious 1HP modules / ideas

so - i ordered a pcb and some bent sheetmetal part to put together a 1hp version of my IPS2. things should arrive in the next two weeks, fingers crossed that everything is working, and the metal people can make that 0.5mm inside radius i need.. thats whats conserning me most.. Screenshot from 2020-1...
by seismic
Sun Oct 11, 2020 3:18 pm
Forum: Music Tech DIY
Topic: terminal tedium (raspberry zero, pi2, pi3 codec / pd thing)
Replies: 929
Views: 114302

Re: terminal tedium (raspberry zero, pi2, pi3 codec / pd thing)

hmm - so, i found finally a little time to further work on the zerOrac board/software. i replaced/recompiled "most" of the externals in /usr/local/orac/externals now i'm only missing: lib_abllink.~.so -> just need to search for the source and should be like all the others to compile.. libmec-soundpl...
by seismic
Sun Sep 27, 2020 3:07 am
Forum: General Gear
Topic: Digital modular synth in a box?
Replies: 63
Views: 1622

Re: Digital modular synth in a box?

something running AUTOMATONISM

Go to advanced search