^That works thanks, must be something with one of my synths though because it doesn't always like it, seems to hang every now and then.

One thing I'm having trouble with is sending a note off message to external synths - I tried CUT and OFF, but neither seems to do the job. I can set the synth to a simple AD envelope an get one per new note, but it would be good to have controlled sustain. Any ideas, or is gate length control not ac...

I'd never used a tracker before and find it much easier to navigate than the Digitakt I used to have. it's not really that complex once you get into it. I reckon give it a go.

Has anyone tried using an analog sequencer like 0-ctrl or pressure points to sequence their Lyra-8 through the CV in?

Do the oscillators maintain their relative tunings?

That's a great tip Electricfence, thanks!

IN my albeit limited time wit the Lyra-8, the options for subtle movement are turn vibrato on, modulation of the delay at low time settings or some slight detuning of unison oscillators, which reduces the notes in your drone.

Could you stretch to an Oto Bam? Pedal, goes well with synths, does long ambient stuff really well, and the plate is good for percussion.

^^Listen to the start of this, before it goes bonkers:

I think the USB is only for firmware updates.

I'd be interested to hear a comparison with the Oto BAM, both based on the same verbs.

Seems like my experience as well, there's a lot to work with in what initially seems a fairly normal structure.

I do wish they replaced the VU meters with an external in, would love to run some other stuff through that filter.

That is the video that sold me on it.

I can't get my medusa to talk to my GRP A2 via midi, yet both can respond to other things (Keystep, Tracker) - any ideas?

I notice the filter has aftertouch in as a mod source, but I can't find how to access that midi channel from my sequencer - is it possible, any ideas of what cc I'd address the sequencer too, or have i missed something?

It has some quirks, but I put it in the category of unique instrument rather than a does all things tool. The main issues for me are that the sequencer could have some more functionality - I've love to be able to split the grid into 4 regions for example, and then press a note to switch between them...

I've just got the 1u ins, and its really quiet - I have to run the ins and my digitakt at full volume to get it anywhere near a matching volume for my modular stuff, and is so its all a bit noisy. Anyone else had this? Are you using the newer audio board? Mine is like this too since upgrading from ...

Can anyone tell me if the oscillator fm on the perfourmer is linear or exponential?

I have had one for about a week now. It's a lot of fun for what you can get them for now, and the v.2 and 3 firmware seems to address a lot of criticisms and the sounds are great. Hopefully they add a clock divider for the sequencer.

Does anyone know how to do ties?

This needs to be seen with a bit of history. If you go back and read the threads about the early MN stuff, the DPO, Maths, phonogene, when Rene v1 came out, it was a very different world for eurorack. Fewer manufacturers, major forms of synthesis that were barely being explored, particularly the Buc...

Will do -thanks

I've just got the 1u ins, and its really quiet - I have to run the ins and my digitakt at full volume to get it anywhere near a matching volume for my modular stuff, and is so its all a bit noisy. Anyone else had this? I have the OG single channel 1u In, and don’t get any noise into my Morphagene (...

I've just got the 1u ins, and its really quiet - I have to run the ins and my digitakt at full volume to get it anywhere near a matching volume for my modular stuff, and is so its all a bit noisy. Anyone else had this?

It doesn't morph between outputs if that's what you are asking, it jumps. So if you put an lfo in to channel selection it won't smoothly change between them. This is good if you want discrete changes (between quantised sequences for example), but something like a RxMx or a crossfader will do morphin...

I just picked up the mmMidi for a Pallet case/MPC Live combo. It's a perfect solution. I do wish there was a way to get a 1 or 4 ppqn clock out of it but there's plenty of ways to work around that. I agree, maybe the clock out could be set maybe in a firmware update (website says it can be done by ...

Can you explain Kermit in PLL mode? On the original Kermit (which I think is officially "mk II"), setting the frequency mode to orange changes the V/Oct input for that channel to a pulse input that it tries to track like a PLL. It'll work at audio rates. As with Tides, the frequency knob becomes a ...