I understand the troubles you have only to good as I run a business by myself and have kids that need time and care. I think helpful would be if you could say what is in which quantities already done, like: - boards are done for all preorders - enclosure is still at the manufacturer that is closed ...

Everything is a bit better here now regarding safety and health, thanks. We still have to be diligent since the epicenter is so close, but locally as a township we’ve managed to halt the increase of number infected. I’ve been wishing I could put out helpful words / updates of substance via either th...

It's been loud here though !
Thank you for all the birthday wishes, that's super nice.

Hello.
Is it a Friday?
Today is my 40th birthday.
Acrylic pieces have been turning out as well as hoped. Quantity runs of wood and plastics soon.
More pics on IG as well.
Looking forward to the workshop when it opens.
Rock and roll to the mothership.
Thank you for the faith and partnership.
j

Comparing those cheeks to the prototype... Not as steep an angle. Quite different. Not as steep because they are flat! That is the flat version which is the exact same shape but without the propping angle material. Angled version is the same as you see on the main website www.motomodular.com but wi...

Thanks for waiting. All will end up well. Just compiling the workarounds and will post soon with the rundown.

Hi Jim, I know it must be somehow tedious for but I'll come back on the shipping. Last time you wrote it should be happen by the end of winter. I don't know for how long it's going on at your place but here everything starts to bloom. Is any forecast possible at the moment? I guess the worldwide si...

Jim, have you still been posting buyer's updates on your site? I haven't received one in a while. Thanks! Yes absolutely. Sometimes the notices randomly end up in the spam folder, which is unfortunately not something we can correct since it is caused by an occasionally glitchy CRM sending system (b...

Then we shall.
There are a lot of demo types to cover yet.
If only we had a staff of 5 full timers!

Thank you everyone. Just a public word that nothing is being slowed here by the COVID-19. There are significant things happening close by though, including towns and counties being effectively shut down or even quarantined with the national guard enforcing it. One of the epicenters is about 50 miles...

TemplarK wrote: ↑

Thu Mar 05, 2020 12:44 pm

I actually dream of using my TE-2 quite often. Last night it was TE-2 and a machinedrum i sold long ago xD My subconcious is waiting for it seems ideas are filling in my mind when i'm asleep even xD

shucks

TemplarK wrote: ↑

Sat Feb 29, 2020 7:38 pm

So you have the first boards now? Can we see a pic? xD

We are not far off from this, and this thread will see them immediately.
It'll be a good day.
There are 6 pcb's.

All of the remaining vintage electronic component replacements are complete and integrated and performing just like the originals. We're in the middle of hardware/electrical file reconciliations across all aspects, proofing and clarifying. Layout basics are looking good. It's a beastly set of boards...

Board interconnectivity methods are established and located (there are 2 hefty boards and 3 very small boards on the module itself, and one medium size board at the base of the enclosure that contains the accessory connection circuits and jacks), requiring some machine soldered flex ribbons but also...

nearly ghost wrote: ↑

Sun Feb 09, 2020 3:51 pm

Im intetested in buying one so i dont know what is bizarre about it but thanks for your response non the less

Apologies, that was just meant to thank the general thread of readers/buyers here, some of whom have tolerated this anticipation for a surreal amount of time!

Is there an actual ETA on these bad boys yet? Been following this thread with interest but been reluctant to pre-order 2085. Just in time for composers to experiment with “tape” to score historical fiction centennial films about the cold war. Some very new phases coming up here soon, where we acqui...

What exactly can be sequenced with the internal sequencer? GREAT QUESTION ! The reason you'll almost never catch me referring to it as a "sequencer" is because people approach sequencers with the feeling that they can either run it or not run it. Sequencers are meant to impose change in a constant ...

You're on Muffs, Jim. Cat lovers are abound. I, however, am the minority, and, am a dog person. Very cute video... Comet is adorable. The TE-2 is a warm idea. Loving the content... Thank you! haha. Well he's not all that much larger than a big cat! And he's definitely as smart. He's a rescue from t...

This weekend is a big weekend of various file wrap ups, decided to set up at home for it since the rest of the fam is out of town. Was messaging about wow and flutter with someone and decided to put demo #012 on the bluetooth speaker. Comet has very mixed feelings about wow and flutter! https://imgu...

Sounds dope! Is this a manipulation of a stream of audio processed live through the Space Case or a recorded segment on the tape? How is the pitch shift created, with note information, a joystick or what else? This is a found cassette. About 3 years ago an old tape player showed up here with a tape...

Thought I'd ask if anyone knows the correct PSU for a TE-1 w/ breakout box? (I just PMed MotoModular but I don't know how often he checks MF.) My used TE-1 PSU has some wobble in the barrel connector, thought I'd order a backup but I want to double check that a 12V 4Amp supply (what it came with) i...

Thank you everyone. Nope no cats in the shop! Didn't get to post as many demos this week as i would have liked, due to hands being full just wrapping this all up asap. Validations are turning out well. In some ways even better than anticipated. Green lighting this thing shortly for the birthing proc...

If anyone is curious, this is the core part of the validation station. What you see here is the audio of the TE-2. The entire tape heads amp circuit, levels, inputs, outputs, filters, feedback, drive, insert, bias oscillation, transport and motor control, etc. Once the PCB shows up, any changes can ...