Search found 179 matches

by goldplate
Mon Dec 14, 2020 4:40 pm
Forum: Eurorack Modules
Topic: What is your favorite way to use Clouds?
Replies: 40
Views: 1811

Re: What is your favorite way to use Clouds?

Reselling it

Sorry but I liked the concept and hated the sound.
by goldplate
Fri Dec 11, 2020 1:02 am
Forum: Music Software
Topic: Ableton Live & sequencers, workaround for latency issues
Replies: 49
Views: 12598

Re: Ableton Live & sequencers, workaround for latency issues

The monitoring track.

If you don't have any Monitor set to On or Auto, the "Reduced Latency when Monitoring" option won't have anything to impact.
by goldplate
Thu Nov 26, 2020 6:29 am
Forum: Eurorack Modules
Topic: Marbles not behaving randomly enough
Replies: 15
Views: 430

Re: Marbles not behaving randomly enough

Set the outputs to more than 2 Volts ?
by goldplate
Thu Nov 19, 2020 1:47 pm
Forum: General Gear
Topic: Affordable and Reliable MIDI Thru and Splitter?
Replies: 20
Views: 1191

Re: Affordable and Reliable MIDI Thru and Splitter?

MidiSizer MIDIThru x2 is a nice DIY option.
by goldplate
Sun Nov 08, 2020 4:09 am
Forum: Eurorack Modules
Topic: 1U Tiles - Did Intellijel bribe all these manufacturers or what?
Replies: 47
Views: 2058

Re: 1U Tiles - Did Intellijel bribe all these manufacturers or what?

But PulpLogic gives you every feature you'd need (with more modularity) if you go with them. On the other hand, you get an Intellijel case and you have to fullfill those blank spaces and.. have to buy those large expensive modules to painfully fullfill it... less attractive to me.
by goldplate
Sat Aug 22, 2020 7:21 am
Forum: Hexinverter Electronique
Topic: DIY dead forever ?
Replies: 8
Views: 517

Re: DIY dead forever ?

Yeah Modular Addict
by goldplate
Tue Jul 14, 2020 3:48 pm
Forum: Music Software
Topic: Ableton Live & sequencers, workaround for latency issues
Replies: 49
Views: 12598

Re: Ableton Live & sequencers, workaround for latency issues

VSTi sequenced via Ableton but the audio is going into the Mixer and then back into Ableton. If you send it out to the mixer and get it back individually in Live, you use your mixer track as an external effect and then you should use the External Effect device in order to get the latency compensati...
by goldplate
Tue Jul 14, 2020 7:46 am
Forum: Music Software
Topic: Ableton Live & sequencers, workaround for latency issues
Replies: 49
Views: 12598

Re: Ableton Live & sequencers, workaround for latency issues

Yeah the VST is sequenced with Live. If the VST is sequenced in Live you shouldn't have any issue if things are set up correctly (unless it doesn't report its correct latency). My machines recorded into live are 8-9ms late because they're going into a mixer first and not directly into the soundcard...
by goldplate
Fri Jul 10, 2020 3:49 am
Forum: Eurorack Modules
Topic: Akai S950 Sampler Sound - ALM MUM M8 and samplerate-reduction?
Replies: 24
Views: 1130

Re: Akai S950 Sampler Sound - ALM MUM M8 and samplerate-reduction?

I'm not expert in aliasing but the most sought after things in the 12 bits sampler seems to be their proper bit reducing function, so just taking any bit reducer like a Doepfer seems to be missing the key point in this.
by goldplate
Fri Jun 26, 2020 7:18 pm
Forum: Production Techniques
Topic: Can you hear the difference between audio interface A/D converters?
Replies: 55
Views: 3039

Re: Can you hear the difference between audio interface A/D converters?

IMHO the sound precision one can perceive was surpassed a few decades ago and today any AD (excluding amp sections) seems just top notch. And anyway no one cares about this when listening to music. Maybe 2500 bucks is a bit too much for two channels, so the motivation brought to you by the marketing...
by goldplate
Fri Jun 26, 2020 6:10 am
Forum: Music Tech DIY
Topic: How can I find L brackets sized for M3 screws ?
Replies: 11
Views: 412

Re: How can I find L brackets sized for M3 screws ?

Thanks !

Those ones seem to be exactly what I'm looking for (except not M3, but that may still fit).

I thought it was a pretty common product but it seems not...
by goldplate
Fri Jun 26, 2020 5:05 am
Forum: Music Tech DIY
Topic: How can I find L brackets sized for M3 screws ?
Replies: 11
Views: 412

How can I find L brackets sized for M3 screws ?

How do you call them ? :hmm:

I need to mount some PCBs at 90 degrees of a panel. Ideally I would need one angle of the bracket with a "stretched" hole so I can adjust its position regarding the holes placement on the PCB.
by goldplate
Sat Jun 20, 2020 6:22 pm
Forum: Music Software
Topic: Ableton Live & sequencers, workaround for latency issues
Replies: 49
Views: 12598

Re: Ableton Live & sequencers, workaround for latency issues

The rules: as soon as you use the computer for any audio, every audio need to go through it so it can delay it so everything plays in sync. So even if you use an hardware mixer, as soon as you turn on the computer you should stop listening to its analog outputs and listen to the soundcard. If I unde...
by goldplate
Mon Jun 08, 2020 5:15 am
Forum: Music Software
Topic: Do you have to manually fix times when recording into a DAW?
Replies: 15
Views: 1118

Re: Do you have to manually fix times when recording into a DAW?

The computer can easily have a decent clock. All of this mess exists because Live's delay compensation doesn't apply correctly with external MIDI clock + people don't know that it's meant that if you record an external sequenced sound you have to record with Monitor set to Off (otherwise it's only i...
by goldplate
Sun Jun 07, 2020 5:04 am
Forum: Music Software
Topic: Do you have to manually fix times when recording into a DAW?
Replies: 15
Views: 1118

Re: Do you have to manually fix times when recording into a DAW?

If you don't use external sequencers, be sure to sequence external midi instruments with an External instruments track and that you record any audio with Monitor set to Off. Once done, if you still have weird delay, you could check if your soundcard driver report a wrong latency and correct it in th...
by goldplate
Tue May 26, 2020 3:52 pm
Forum: General Gear
Topic: RE-303 stopped working
Replies: 4
Views: 295

Re: RE-303 stopped working

Not sure it's the VCF... You should probe in the audio path to find at which point it fails.
by goldplate
Mon May 25, 2020 1:35 pm
Forum: Music Tech DIY
Topic: Two Thousand Six Hundred (TTSH) Ver.1 General build thread
Replies: 2939
Views: 304885

Re: Two Thousand Six Hundred (TTSH) Ver.1 General build thread

If someone may be interested, I have ordered by mistake some parts for the v1 instead of v2. For example the DC/DC (AEE00CC18-LS) converter which is pretty expensive (I have 2 of those), and a ton of cable connectors that I don't know what to do with...
by goldplate
Tue May 19, 2020 10:14 am
Forum: General Gear
Topic: Sequentix Cirklon
Replies: 1027
Views: 112392

Re: Sequentix Cirklon

Carrousel wrote:
Tue May 12, 2020 9:12 am
[...]

So, why would anyone ever use local control off with soft-thru on?
Maybe some hints... http://forum.sequentix.com/viewtopic.php?p=22695#p22695
by goldplate
Tue Apr 14, 2020 12:56 pm
Forum: General Gear
Topic: Sequentix Cirklon
Replies: 1027
Views: 112392

Re: Sequentix Cirklon

loydb wrote:
Tue Apr 14, 2020 12:33 pm
It only works if I set the Impakt to internal clock, and set the Cirklon to receive MIDI control on the appropriate channel.
You do not need to set up anything to get the Cirklon slaving to incoming transport messages.
by goldplate
Sun Apr 12, 2020 6:13 pm
Forum: Eurorack Modules
Topic: What eurorack modules do i need to record into DAW?
Replies: 9
Views: 760

Re: What eurorack modules do i need to record into DAW?

Try to connect and see if it's too high... my mixer has its unity gain point at about 11oclock so it attenuates under.

Attenuation is just a resistor... if you're in a hurry or don't want to spend, you can take clips cables and resistors or, better, potentiometers ((A/log)50 or 100K usually).
by goldplate
Sat Apr 11, 2020 8:59 pm
Forum: General Gear
Topic: CV Sequencer with envelope outputs?
Replies: 30
Views: 1583

Re: CV Sequencer with envelope outputs?

Cirklon
by goldplate
Sat Apr 11, 2020 3:54 am
Forum: Production Techniques
Topic: How would you sync all this together?
Replies: 5
Views: 563

Re: How would you sync all this together?

Choose the machine with which you do the most edits to control external devices as master for the transports messages (start/stop/clock), so you press play and stop in front of you most of the time, and obviously for notes and CCs too as it needs to... I would say the Beatstep Pro as it is the most ...

Go to advanced search