I think there are a few kludgy part modifications if I remember correctly (apologies if not) There is a fix for distortion over time by putting a 100k resistor between two points of the pcb, depending on the version of the build (for anyone considering building one) https://github.com/TomWhitwell/R...

I make the AI006 and AI001 multiple. Feel free to reach out if you have any questions. Thanks, Abe The AI001 and AI002 Mixer (3 channel mixer) were my first two builds and they were super easy with great instructions. I wouldn't hesitate to get/recommend anything Abe/AI makes based on those two. I ...

mr_william wrote: ↑

Sun Jun 07, 2020 8:31 pm

Thanks! Each piece was done live as a single take!

Awesome. Listening again this morning (3rd time now)

Also really liking the "Vague" album

I'm digging this.

Is this multi tracked?

I built a Music Thing Modular Chord Organ fairly recently, it was pretty straight forward. The Radio Music is essentially the same build but with a different firmware, I think. There are other alternate firmwares for that platform as well, so if neither of those uses suite you, there might be a firm...

I'd get rid of the two 2hp unbuffered mults and put in an 8hp ornament & crime (uO_c)

edit: I didn't realize you had 1hp free on each row, so just get rid of one of the mults.

Not sure if this counts as mangling as no element of the source material is directly in the end result, here's a loop I made last year. I put the Amen break in the morphagene, used it's envelope follower, took the audio out from the morphagene and ran it into ears to use it's env follower and gate d...

That being said, I wonder if a BSP can slave to this over a midi channel. why wouldn't it be able to? BSP can be a midi slave right now; it doesn't know or care who the master is, midi is midi I mean more than just clock, start and stop. I mean if you could somehow control the bsp from the ksp, suc...

It would have been wicked if it could act as a USB host and power/sync with a beatstep pro. That being said, I wonder if a BSP can slave to this over a midi channel.

Interested to see what comes up here as I have an E-MU PX-7 that I've been thinking about using as a sequencer with a mutant brain.

How are you going to feed Morphagene, just using pre-made SD cards? If not you'll need a preamp/input amplification to get audio into it. This is incorrect. Morphagene can handle line level input. From page 11 of the manual: The Signal Inputs (1+2) accommodate modular synthesizer signals, as well a...

Totally my 2cents, but I think maths *might* not be worth it yet in this rack... I think it's a "second row" module here. 0-Coast and BIA already have envelopes built in, PNW will give you clocked envelopes, right? so envelopes aren't needed from maths. You also have a mixer, so that's not needed fr...

Open it up, take a picture of the circuitboard.

Any leaking capacitors? I had a problem with my PX-7 crashing, one of the capacitors was leaking. Replaced it and it's good as new.

Edit: Pailo's answer was better.

i've got nothing to offer, i'm also interested in knowing this.

What's your goal? If you want a Batumi and are in the US, perfect circuit has it for $280 through tomorrow. An SSF ultra random analog might be a nice addition though...if you want random. Also on sale at perfect circuit right now :). (I have no affiliation with perfect circuit other than being a cu...

I'm not a eurorack veteran, so take this with a grain of salt. Plaits and Rings can cover some similar territory, you might not need both. If plucky sounds is what you want out of rings, a 2hp pluck would fit the bill for much less space. Rosie isn't really needed, nor are output modules in general....

I don't have a system for live performance, but that's an interesting problem....I suppose you could use a clock divider and/or sequential switch and one of those jack plugs that light up to light up at the beginning of every bar, that way the bar markers would be inaudible.

Did you try adding some gain to the signal before going into PNW? Maybe the signal isn't hot enough?

Use aggregate devices: https://help.ableton.com/hc/en-us/articles/209071609-Using-Aggregate-Devices-and-multiple-audio-interfaces I have windows :( From the link: Aggregate devices on Windows On Windows it's not possible to create aggregate devices at a system level.If using the MME/DirectX, you ca...

Use aggregate devices: https://help.ableton.com/hc/en-us/artic ... interfaces

You might want to check out the NIN episode of Song Exploder.

https://songexploder.net/nine-inch-nails

MI Shades is very similar.

I just went through 6 months thinking there was something wrong with one of my modules or power supply. I was always using headphones right into the modular, attenuated. My BIA was making a buzzing while the envelope was open, my Chord Organ had audible hiss constantly. My DIY Noise Reap 2xVCA had a...

For 2 less HP the Pico VCF1 self oscillates too and it also fixes your odd hp problem.