Neural Net app on o_C Hemisphere suite?

From Shakmat's post in a different thread, posted yesterday:

"A little update on our upcoming modules

Aeolus seeds and mixer are now in production "

So, we should see these two modules in store soon. The V3kt has been out for some time I believe, but don't know about availability.

Check out Shakmat Modular's Aeolus Seeds and Aeolus Mixer. The Antimatter Audio V3kt may also be useful to you.

Zymos wrote: ↑

Tue Sep 08, 2020 8:13 am

philipdeman wrote: ↑

Tue Sep 08, 2020 1:50 am

I still have to figure out what the difference is between the L and R output

“Spread” increases panning of the individual claps.

Huh, never noticed that. Sweet, I'll have to pay more attention to that. Thanks

I'll put in a fourth recommendation for the Fracture. Being able to not only dial in the number of people clapping up to a full auditorium but also somehow realistically mimic a couple of drunk dudes sitting in a room clapping out of sync is more fun than it should be. I will say that the reverb is ...

with the Joranalogue Morph4 one could patch in band, low, high, and notch filters in and scan between the four. I don't know why more people aren't freaking out about this new module Good question. Similar quad crossfader modules has existed in the past without gaining much popularity. EFN had a Bl...

The ADDAC 106 has 4 voices, each of which can be triggered, either by a gate or trigger or by any other CV signal that can be set to be converted to a trigger as soon as a threshold is passed. You can then set the decay individually for each voice. From the description: "At each voice input there’s ...

https://www.modulargrid.net/e/addac-system-addac106 seems comparable, though also located in Europe

I don't actually have any of these modules and I don't know how open you are to other suggestions, but if workflow + features are your main concerns, then I would look into Frap Tools 321. In 6 HP it offers offset, attenuversion (where inversion is done using a switch so you never have trouble findi...

... but it seems way more difficult than it should be to find modules with 6-8 simple CV-modulators that combine attenuation/amplification/10V offset in an affordable and ergonomic package. Why is this 'more difficult than it should be'? It's a very niche use case. 8 channels of amplification, how ...

Good call about the 2HP, but the Avert does not seem to provide additional gain. Neither does the 2HP VCA apparently. Bummer

Forgot about the Hinton, that's probably the best alternative there is right now, but quite a bit more pricey. Appreciate the suggestion

Is the Levit8 still the only module that combines 8 attenuators with inversion and 2 x gain (or more) into a 10HP-ish package? I don't even really care about the small footprint, but it seems way more difficult than it should be to find modules with 6-8 simple CV-modulators that combine attenuation/...

someone posted something in another thread about an upcoming instruo module ('saïch') comprising 4 analogue sawtooth oscillators with individual V/Oct inputs in 12 HP. not sure when and how much, and the only source so far is one of the instruo trading cards, but hey, would be a natural fit with har...

I won't say never but I'm not really set up to sell replacement panels at the moment. (Picking this up from the other thread.) Even if you don't do separate replacement panels, do let us know if Soundstage gets a run in the matte panels of the new modules. I'll pick a new unit up and sell my curren...

Video: https://www.instagram.com/p/CBavr2ZhLTF/?igshid=13qrp36ez7qe8 Thanks for sharing the video. Really like the various degrees of overdrive/distortion. I don't really understand though why the sequence distorts when it runs through the fourth (regular, non-broken) VCA - does anyone have an idea...

I just received an email from Jason confirming that the Lion 6x6 matrix mixer is real and in the pipeline. No further details, except that it will be released before the EAS (which I inquired about as well). So, hopefully not too long before Lion is released, although no specific release date could ...

still no pic of the matrix mixer card? super interested in that one. cascading logic looks insane too especially since it looks like the outs light up to indicate gates yeah those two are what i'm most interested in as well. wondering how the cascading logic will compare to the abstract data logic ...

B0bcat wrote: ↑

Mon Jun 15, 2020 11:53 am

Petition to move parts of this thread into a new one entitled “Instruo Trading cards” or similar — it would make it more obvious that Ben is not involved in every single one of these teased projects and avoid shading the different parties in these various collaborations

Seconded

B0bcat wrote: ↑

Fri Jun 12, 2020 2:31 pm

mkasthe wrote: ↑

Wed Jun 10, 2020 10:10 am

I got a card in my Ochd box with different module named lìon (a 6x6 matrix mixer)

I'd be really interested in more info on that matrix mixer, in particular how much HP it's gonna be

Same here, anyone?

I was a little surprised to discover that the IN and cv knobs don't have any effect on the shaping unless there is an input plugged in. This is not only different from some of my other R*S modules but seems, unless I'm mistaken, to be different from the Serge TWS on which it's based (Doug Lynner st...

*bump* any news on the revival of this funky zombie? Brain Seed II was well in process, then *RECORD SCRATCH* ...the engineer who I was working with who made the original (Tim from Circuit Abbey) lost his home and a leg, and nearly died from an infection twice, so priorities changed a bit. I visit ...

Went through the posts again and only now noticed that the new Logic Boss has the number ADE-34 assigned to it, so that #ade34 in the pic should confirm this is indeed the Logic Boss mk2

This looks like it could be the prototype for the new Logic Boss perhaps? Going by the #logic and pcb size mainly.

*bump* any news on the revival of this funky zombie?