MUFF WIGGLER

pinkflag16

Hey, you should check this post from Dimitree : https://www.muffwiggler.com/forum/viewtopic.php?t=193238 He really go deep inside the korg Beats and proposed some hats and snare mods. I hope your soldering iron has a small tip since it's all SMDs ! Good luck, would be interested in the result ! Tha...

pinkflag16

I'm not a DIY-er, but I do own a soldering iron and have some free time lately :). I like the Beats stock sounds, including the snare, but I find the hats a little too metallic for my liking. I'm a big fan of 70s drum machines, in which the hats were more noise-based. I know there is a white noise s...

pinkflag16

Richard deHove wrote:The new Erica delay should be out in early June:

Not analog, unfortunately.

pinkflag16

Nice idea! Can you make an ios version? I think I have a card reader...

pinkflag16

Some (slightly too short) aluminum bars and Gorilla tape off of Amazon:

pinkflag16

The 2.1mm barrel cable from Sweetwater should work! That’s good. I actually just went into one of my cable drawers and found what looks to be the same one! Now I’m thinking of grabbing a metal A4 size clipboard and some Gorilla mounting tape. Pull off the clip and it is a little under the size of t...

pinkflag16

Is there anything special about the 4ms barrel connector, or can I use this longer one?:

https://www.sweetwater.com/store/detail ... le-18-inch

pinkflag16

You could probably just use a piece of plywood cut-to-size, with velcro on it, to mount them bottom to bottom. Or drill holes for screws, for something more permanent/sturdy. More elegant than plywood :). What is the thinnest material that is rigid enough to support them, presumably held in place b...

pinkflag16

I'm downsizing a bit, and wanted to better utilize my pods. Two questions: 1. Has anyone come up with a simple and elegant solution to mount two pods bottom to bottom, like a 6U 60hp skiff, that does not involve a pedal board and does not increase the length or width? 2. If mounted bottom to bottom,...

pinkflag16

I'd like to see some contracter modules that shrink the original by removing unused features or unnecessary blank space.

pinkflag16

mantiwhore wrote:
pinkflag16 wrote:
Great! Please hurry.
Well, we would miss the opportunity to delay a delay...

pinkflag16

Tomek Mirt wrote:
What is the depth?
approximately 4cm deep, two pcbs.

Great! Please hurry.

pinkflag16

THANK YOU!!!! I have always been disappointed by the lack of analog delays in Euro. I personally only use bbd delay pedals or occasionally tape, so this is a definite yes.

What is the depth?

pinkflag16

From what you've chosen, I've only used the VG8, Entity, and Belgrad. The latter two are solid, great modules, but the VG8 tends to be a love/hate thing. Great for drums, but I found it too tedious for CV. If you haven't used one before, might want to see if you can try before you buy.

pinkflag16

I can make a nice vintage-y hat with any hp filter fed with noise. I like to use the Quantum Rainbow for some source variety, and currently have a 2hp MMF crammed into my 48x drum pod. Kicks, SSF Entity all day. It's basically a filter, after all. I could achieve great results also with the QPAS for...

pinkflag16

Ringo wrote:
...which caused the death of two scientists. So the symbolism and the name are really not as bad as I thought.

pinkflag16

<t>So just so I'm understanding how this works... I can hang a trs to MIDI dongle and plug in my cheap MIDI keyboard and start playing, right? What about using a Euro sequencer with CV/Gate? If I have the expander attached and am running into the CV/Gate ins on the main module, will the env/vca from...

pinkflag16

I was just thinking of paring down my modular a bit to fund either a Polysix or Mono/Poly. Then the Matriarch was announced. Now this. Good year so far.

pinkflag16

cackland wrote:Yeah, as much as I like the idea of QPAS, just couldn't bring myself to getting it. Maybe this is more of a temptation.

Apples and oranges, really. I run my SSF into the QPAS and it is quite a combination. Kept my 3 Sisters too. I guess I have a type...

pinkflag16

I do not see anywhere in the manual about turning off the stage count. My stage menu on the unit goes 1 to 64, with no off position. hum, that is indeed weird. I only always use the "Fixed Forward Mode" that resets after a fixed number of steps. And I always assumed the stages number is ignored oth...

pinkflag16

So I have to set the stage count to 7 if I want to skip a stage? Seems odd. So by default it is at 8, and by skipping a stage, I am making it count Stage 1 as both 8 and 1? That can't be right. not sure what you mean, but you can turn off the stage count entirely. Metropolis will then loop through ...

pinkflag16

I just got a used Metropolis yesterday, and updated to 1.36 without any issues. Problem is, when I skip any stage using the skip buttons, the first stage in the sequence begins doubling its repeats. I haven’t done much tweaking of settings, and am running in the normal forward mode. Is this a bug, ...

pinkflag16

I just got a used Metropolis yesterday, and updated to 1.36 without any issues. Problem is, when I skip any stage using the skip buttons, the first stage in the sequence begins doubling its repeats. I haven’t done much tweaking of settings, and am running in the normal forward mode. Is this a bug, o...

pinkflag16

Or just send the petition straight to Behringer.

pinkflag16

I don't see the SSF and QPAS as similar at all. Definitely keeping both. Definitely not so similar. The only similarity i see the description of Quad Peak and that is where it ends. DiPole is a Beast on its own level, QPas is not even close (i do own it as of now) but it might be worth keeping them...

MUFF WIGGLER

MUFF WIGGLER

Search found 421 matches

Re: Volca Beats Hat Mod?

Volca Beats Hat Mod?