Search found 493 matches

by VZvision
Sat Sep 12, 2020 2:57 pm
Forum: Eurorack Modules
Topic: Rabid Elephant NATURAL GATE
Replies: 1169
Views: 100951

Re: Rabid Elephant NATURAL GATE

Anyone on the pre-order list at Signal Sounds heard anything/received any info?
by VZvision
Wed Aug 12, 2020 2:45 pm
Forum: Modular Synth General Discussion
Topic: Eurorack for my current setup
Replies: 17
Views: 509

Re: Eurorack for my current setup

I am thinking of MI Yarns or Endorphin Shuttle Control module for the MIDI/CV module in an Intellijel 7U case and few modules. Cool! Once you’re ready to get the midi-to-cv up and running with your OT, here’s a really great resource on using the midi sequencer with modular in combination with the s...
by VZvision
Sun Aug 09, 2020 10:06 pm
Forum: Eurorack Modules
Topic: MMF-1s vs MMF2 sonic differences?
Replies: 11
Views: 374

Re: MMF-1s vs MMF2 sonic differences?

I find the MMF-2 to be much smoother sounding than the MMF-1S. I rarely put the MMF-2 into hard saturation mainly because it’s a bit too harsh to my ears but the soft saturation is a really nice circuit. I would compare it to 25%-40% saturation on the MMF-1S, but, again, any sweep or movement of fre...
by VZvision
Wed Aug 05, 2020 11:04 pm
Forum: Eurorack Modules
Topic: Sequencers with ramp control
Replies: 24
Views: 778

Re: Sequencers with ramp control

Spindrift wrote:
Sat Jul 04, 2020 12:48 pm

RYO VC Sequencer seems very good match, but unavailable and could also imagine something bigger with more rows of knobs.
Better pounce bud :tu:

viewtopic.php?f=74&t=234530
by VZvision
Wed Aug 05, 2020 8:10 pm
Forum: Eurorack Modules
Topic: compact A-D envelope with gate input for looping? Hit me!
Replies: 14
Views: 341

Re: compact A-D envelope with gate input for looping? Hit me!

Contour doesn’t loop though, does it? It does. But there is no CV over looping via a gate input turning it on and off. The closest you’d get is the hold circuit which is more freezing the slew than changing the cycle/loop behaviour directly. I'd just like to add that you can indeed use the gate inp...
by VZvision
Wed Aug 05, 2020 12:37 pm
Forum: Eurorack Modules
Topic: compact A-D envelope with gate input for looping? Hit me!
Replies: 14
Views: 341

Re: compact A-D envelope with gate input for looping? Hit me!

Contour doesn’t loop though, does it? It does. But there is no CV over looping via a gate input turning it on and off. The closest you’d get is the hold circuit which is more freezing the slew than changing the cycle/loop behaviour directly. Ah, I guess you loop it by patching EOC into Gate Input, ...
by VZvision
Wed Aug 05, 2020 11:43 am
Forum: Eurorack Modules
Topic: compact A-D envelope with gate input for looping? Hit me!
Replies: 14
Views: 341

Re: compact A-D envelope with gate input for looping? Hit me!

diggida wrote:
Wed Aug 05, 2020 11:22 am
Contour doesn’t loop though, does it?
It does. But there is no CV over looping via a gate input turning it on and off. The closest you’d get is the hold circuit which is more freezing the slew than changing the cycle/loop behaviour directly.
by VZvision
Tue Aug 04, 2020 8:51 pm
Forum: Eurorack Modules
Topic: ACL Sinfonion
Replies: 1107
Views: 110221

Re: ACL Sinfonion

I’m having a strange problem this morning that has flummoxed me. (I have already reset the unit to factory settings and rebooted multiple times at this point.) First of all, tuning seems to work exactly as expected: All the outputs send the expected voltage levels (matches the screen) and I’ve tune...
by VZvision
Tue Aug 04, 2020 10:47 am
Forum: Eurorack Modules
Topic: compact A-D envelope with gate input for looping? Hit me!
Replies: 14
Views: 341

Re: compact A-D envelope with gate input for looping? Hit me!

ALM pip slope is the closest I can think of right now...the CV control over loop on/off is likely to be the hardest thing to find in that size. 2HP larger and there’s the SSF Mini slew which DOES have CV over cycling I believe. In fact, 2HP larger would likely open up wayyy more options (Joranalogue...
by VZvision
Mon Aug 03, 2020 9:03 pm
Forum: Eurorack Modules
Topic: Voltage Block / Varigate combo?
Replies: 16
Views: 645

Re: Voltage Block / Varigate combo?

Your explanation and Joey's initial response make the VB and VG way more powerful in terms of more modular type sequencing. In fairness, the 185-2 precision adder is kind of the linchpin that makes the above patch concept work since any clock divided sequence(s) can be patched here. :wink: The VB’s...
by VZvision
Mon Aug 03, 2020 8:04 pm
Forum: Eurorack Modules
Topic: Is there a 6-8 chan mono euro mixer with 1 send and eq/filter per track
Replies: 16
Views: 378

Re: Is there a 6-8 chan mono euro mixer with 1 send and eq/filter per track

To get all that in 30 HP sounds like a unicorn hunt to me :) Esp. the EQ.

The closest I can think of is HexMix plus expander which you already mention but that’s nowhere close to 30 HP.

In your “failing that” category, however, perhaps SSF Muton or Erogenous Tones Levit8?
by VZvision
Mon Aug 03, 2020 7:31 pm
Forum: Eurorack Modules
Topic: Voltage Block / Varigate combo?
Replies: 16
Views: 645

Re: Voltage Block / Varigate combo?

I'm having a difficult time understanding what you're saying here but very interested. Send a 16th not sequence, then modulate with whole note, half note, etc. clock divided sequences from the VB to get complex sequences up to 256 steps. Would you mind explaining this further? What 16th note sequen...
by VZvision
Mon Aug 03, 2020 6:04 pm
Forum: Modular Synth General Discussion
Topic: Eurorack for my current setup
Replies: 17
Views: 509

Re: Eurorack for my current setup

Yeah even a bare bones Eurorack setup of a few core modules is like 2-4k. I know guys with massive setups and 50k plus of modules! Of course they also have a ton of hardware and computer synths. One guy has like 4 Eloquencer sequencers in his live modular rig even! Another has walls of modular must...
by VZvision
Sun Aug 02, 2020 8:40 pm
Forum: Modular Synth General Discussion
Topic: BEGINNERS - What have you always found to be poorly explained?
Replies: 139
Views: 6002

Re: BEGINNERS - What have you always found to be poorly explained?

Beware and be AWARE of 'hidden' offset removers in your signal paths! Those AC coupling capacitors. This made me think of another point that is definitely not clear for all modular users (or even clear at the module-by-module level either)...quickly glazed through the topic and didn’t see it overtl...
by VZvision
Sun Aug 02, 2020 3:09 pm
Forum: Eurorack Modules
Topic: Offset generator + switch as sequencer
Replies: 9
Views: 232

Re: Offset generator + switch as sequencer

The most common for me is to use a LFO where frequency and/or shape has the option to be modulated. Then I put the modulation of that LFO behind a VCA so I can dial it up or off. Note that the V1 Bow Tie has no clocking so it’s purely addressable. Also, if I’m not using the Joystick as a voltage sou...
by VZvision
Sun Aug 02, 2020 2:11 pm
Forum: Eurorack Modules
Topic: Offset generator + switch as sequencer
Replies: 9
Views: 232

Re: Offset generator + switch as sequencer

Actually I was thinking of getting the Maze anyway for mixing and routing both CVs and pitches, but in this context it would be wasted. Totally. It’s like a $500 module if I recall correctly so just for (potentially) having slew-per-step would be :eek: FWIW, I usually set up what you’re talking abo...
by VZvision
Sun Aug 02, 2020 1:28 pm
Forum: Eurorack Modules
Topic: Offset generator + switch as sequencer
Replies: 9
Views: 232

Re: Offset generator + switch as sequencer

- bonus: possibility to slew from one step to the other, so ideally the switch should allow to crossfade between the inputs when the address slowly changes (e.g. while moving from input 1 that is 1v and input 2 that is 2v the output should smoothly go from 1v to 2v (1.1v, 1.2v, 1.3v, etc); Apart th...
by VZvision
Sun Aug 02, 2020 12:56 pm
Forum: Eurorack Modules
Topic: New 2018 MakeNoise Rene
Replies: 745
Views: 82457

Re: New 2018 MakeNoise Rene

Yes, Pam's is fine. Rene will only advance to the next step when gates are received, hence, if you send it odd division off gates, you will have some polyrythms happening. Cool. Of course. But can you do it within René only? If we are just talking X and Y channels then: POLYMETER: Set up different ...
by VZvision
Fri Jul 31, 2020 12:29 pm
Forum: Eurorack Modules
Topic: Sequencers with ramp control
Replies: 24
Views: 778

Re: Sequencers with ramp control

Patching and combining several modules would work, but the main point for me is the a fluid interface to create modulation patterns, so it has to be immediate with symmetric spacing. Had this on my mind the other night since I gave the suggestion of a switch and voltages....so gave it a whirl with ...
by VZvision
Thu Jul 30, 2020 9:00 pm
Forum: Eurorack Modules
Topic: TriTone - 3 band EQ, filter, saturator
Replies: 44
Views: 5132

Re: TriTone - 3 band EQ, filter, saturator

uebl wrote:
Thu Jul 30, 2020 4:02 pm
Are these still in production and/or available anywhere, preferably in silver?
Check on the wigglehunt :tu:

https://wigglehunt.com
by VZvision
Thu Jul 30, 2020 8:52 pm
Forum: Eurorack Modules
Topic: BPM and clocks based on time
Replies: 5
Views: 168

Re: BPM and clocks based on time

It seems sounds since 60 BPM = 60 beats per minute = 1 beat per second...so /5 would yield 1 beat every 5 seconds = 60 beats every five minutes. The only problem I’d really envisage is doing the math on something like PNW which is calculating its clock pulses at the outputs based on a PPQN setting w...
by VZvision
Thu Jul 30, 2020 8:38 pm
Forum: Eurorack Modules
Topic: One knob to control two cutoff frequencies
Replies: 31
Views: 582

Re: One knob to control two cutoff frequencies

ari ellis wrote:
Thu Jul 30, 2020 8:36 pm
If they track 1V/oct, then adding 1V doubles the cutoff frequency. The total range of frequencies doesn’t matter to this point. If the input tracks 1V/oct, then that is its scaling, done deal.

Ahaaa! That clicked! Was tunneling too hard on the range idea :bang: Thanks for that :tu:
by VZvision
Thu Jul 30, 2020 8:29 pm
Forum: Eurorack Modules
Topic: One knob to control two cutoff frequencies
Replies: 31
Views: 582

Re: One knob to control two cutoff frequencies

Surprised no one has asked what the CV ranges are for the filters that are being controlled....whether the ranges are different or the same would change how each copy of the voltage source controlling the cutoffs would need to be processed (or lack there of). maybe because everyone assumes 1v/oct? ...
by VZvision
Wed Jul 29, 2020 4:33 pm
Forum: Eurorack Modules
Topic: Sequencers with ramp control
Replies: 24
Views: 778

Re: Sequencers with ramp control

Bow Tie and an 8 ch CV source seems like an interesting option! Not a lot of options for an 8 ch CV source what I can find though. Michigan Synth Works has an 8 ch faderbank, but it has MIDI and stuff I will never use. So with that combo more $ and more HP than RYO, although some added flexibility ...
by VZvision
Wed Jul 29, 2020 11:08 am
Forum: Eurorack Modules
Topic: Sequencers with ramp control
Replies: 24
Views: 778

Re: Sequencers with ramp control

Thanks for the suggestions! Been looking at Rene, Voltage Block and Multi-Stage, but really like the simplicity of the RYO in comparison. Also I really would like 8 steps. Seems like I have to be patient and hope to find a RYO one day, or spend at least 3 times as much to get something with a lot o...

Go to advanced search