Search found 1076 matches

by Hanz
Wed Sep 23, 2020 8:37 am
Forum: Eurorack Modules
Topic: Post pics of your euro setup!
Replies: 14435
Views: 2742642

Re: Post pics of your euro setup!

Finally got my Analogue Systems RS-15 racks upgraded to a proper case... :party: I figured my trusty Asys system deserved something nicer looking, and found an experienced modular case builder willing to take on a custom job at reasonable price, and even in my direct vicinity! Wanted to keep the exi...
by Hanz
Tue Sep 08, 2020 6:32 am
Forum: Eurorack Modules
Topic: Twigs: Alternate Firmware for Branches
Replies: 44
Views: 6004

Re: Twigs: Alternate Firmware for Branches

Thanks! Did anything else change in the 1.0.2 update vs Ukyzky’s branch? (haha!)
Asking since I’m not sure if it makes sense to whip out my programmer...
by Hanz
Sat Jun 13, 2020 6:57 am
Forum: Eurorack Modules
Topic: ACL Sinfonion
Replies: 1108
Views: 111290

Re: ACL Sinfonion

Still, in my opinion even the owners of modules with newer firmware would benefit from being able to update at a later point. While definitely not a huge thing, I've noticed one or two smaller bugs with mine - which I had originally had to send back for manufacturing defect, and came back with (earl...
by Hanz
Mon May 04, 2020 3:47 pm
Forum: Eurorack Modules
Topic: Issue with AJH Synth Minimod VCOs' pitch stability
Replies: 27
Views: 1482

Re: Issue with AJH Synth Minimod VCOs' pitch stability

The issue I experienced with my Minimod VCO’s (at different times) was pitch waverIng once fully warmed up (so it’d start of perfectly normal then go increasingly bad ever so slightly ... and taking out of the case would appear to ‘resolve’ until... etc.) Sound was actually quite close to a mosquito...
by Hanz
Fri May 01, 2020 6:19 am
Forum: Eurorack Modules
Topic: Issue with AJH Synth Minimod VCOs' pitch stability
Replies: 27
Views: 1482

Re: Issue with AJH Synth Minimod VCOs' pitch stability

Not sure if this was already addressed / considered earlier in this thread, but I’ve noticed the same issue on two out of my three Minimod VCO’s, and was able to resolve this myself with guidance from Allan. Essentially this appears to be caused by a wiper issue in the calibration trimmers, however ...
by Hanz
Mon Mar 09, 2020 8:28 am
Forum: Eurorack Modules
Topic: Twigs: Alternate Firmware for Branches
Replies: 44
Views: 6004

Re: Twigs: Alternate Firmware for Branches

Thanks for making this update.
Had indeed noticed some issues with clock pulse recognition using the previous version of Twigs.
Installed this new version and now clock compatibility seems to work much better.
by Hanz
Mon Sep 09, 2019 2:11 pm
Forum: General Gear
Topic: format aside, best sequencer ever? cirklon, fenix 3, 250e, ?
Replies: 45
Views: 3923

Nobody for Genoqs Octopus?
by Hanz
Thu Sep 05, 2019 3:07 pm
Forum: Eurorack Modules
Topic: WMD Arpitecht
Replies: 380
Views: 42239

The Arpitecht leftmost trimmer is the input v/oct calibration.
by Hanz
Mon Aug 26, 2019 8:24 am
Forum: Eurorack Modules
Topic: E102 Temporal Shifter - Expander Module
Replies: 102
Views: 8879

Merry Christmas already! :sb:
by Hanz
Sun Aug 25, 2019 4:52 pm
Forum: Eurorack Modules
Topic: ACL Sinfonion
Replies: 1108
Views: 111290

My Sinfonion came in this weekend thru Schneidersladen. Unfortunately it seems to have arrived with a production defect, namely the CH1 OUT does not work at all (a constant 0V output). Factory reset did not help. Confirmed the CH1 IN working correctly, though, by remapping the matrix. Already sent a...
by Hanz
Tue Jul 09, 2019 11:21 am
Forum: Modular Synth General Discussion
Topic: Colored Knobs
Replies: 18
Views: 1286

Factory default Analogue Systems knob color coding (which I actually think inherits EMS color scheme): White for audio/signal paths, grey for CV/control, blue for frequency/clocks, red for ADSR, green for wave shape/width, yellow for res/slew/pan and orange for anything else. (That is, before I repl...
by Hanz
Wed May 08, 2019 5:33 pm
Forum: Eurorack Modules
Topic: Superbooth 2019 hype/ new announcements thread.
Replies: 342
Views: 47936

Three new modules from AJH Synth -> http://www.ajhsynth.com/Superbooth19.html I really like the Precision Voltages module, seems to offer exactly what I need right now :) A precision adder / substractor is always welcome, the dual octave and note shifting looks enticing and having a precision voltag...
by Hanz
Tue Apr 09, 2019 12:50 pm
Forum: Eurorack Modules
Topic: Old forgotten eurorack gems
Replies: 115
Views: 11800

Pretty much a whole bunch of Analogue Systems (Asys) modules. Although they finally (!) upgraded three of their modules to euro power bus and mounting holes, many of the more interesting modules have pretty much faded into obscurity. Not sure if they are still stocking (or potentially even building)...
by Hanz
Mon Apr 08, 2019 4:01 pm
Forum: Eurorack Modules
Topic: What is your favorite small clock divider/multiplier?
Replies: 50
Views: 4499

Mutable Branches running Twigs firmware.
2x voltage controlled clock divider and/or multiplier (or swing!) in one 6hp module.
by Hanz
Thu Mar 21, 2019 7:23 am
Forum: Eurorack Modules
Topic: MI Yarns calibration
Replies: 4
Views: 315

I noticed the same but found updates in the Mutable forum.
Be sure to scroll down for latest version.

Go here: https://forum.mutable-instruments.net/t ... e/14922/51
by Hanz
Mon Oct 15, 2018 11:23 am
Forum: Eurorack Modules
Topic: Verbos Bark Filter VS Frap Tools Fumana ?
Replies: 19
Views: 2090

Re: Verbos Bark Filter VS Frap Tools Fumana ?

Clearly. However, not only band stepness is different, so is the specific selection of the EQ bands. While Fumana is carefully distributed across 14 bands (roughly a Major 7th) with additional lowpass and highpass filters on first and last bands I thought that the Fumana frequency distribution was ...
by Hanz
Mon Oct 15, 2018 6:29 am
Forum: Eurorack Modules
Topic: Verbos Bark Filter VS Frap Tools Fumana ?
Replies: 19
Views: 2090

Re: Verbos Bark Filter VS Frap Tools Fumana ?

The Fumana is actually 2 full 16 band filters behind 1 panel. It can do much better Vocoding. Clearly. However, not only band stepness is different, so is the specific selection of the EQ bands. While Fumana is carefully distributed across 14 bands (roughly a Major 7th) with additional lowpass and ...
by Hanz
Mon Oct 15, 2018 6:19 am
Forum: Eurorack Modules
Topic: Verbos Bark Filter VS Frap Tools Fumana ?
Replies: 19
Views: 2090

Agree with the above. Purchased a Fumana recently on strength of some of some example videos. What I did not expect is the level of quality in terms of ‘precision’ in use and ‘clarity’ of the signal. It just feels ... extremely well made. Without turning this into a bashing of Verbos (of which I own...
by Hanz
Sun Oct 14, 2018 12:05 pm
Forum: Eurorack Modules
Topic: Batumi in a small rack
Replies: 14
Views: 772

Keep in mind that, with Batumi’s “alternate firmware” you will be able to attenuate from within Batumi itself.
Perhaps not as immediate as using an external attenuator, but still great in a smaller setup.
by Hanz
Fri Oct 12, 2018 3:03 pm
Forum: Eurorack Modules
Topic: Post pics of your euro setup!
Replies: 14435
Views: 2742642

As somebody once famously said: “if you can afford a truck, you can afford a synthesizer”...

Image

... now I can’t afford a truck anymore!
by Hanz
Sun Sep 23, 2018 9:39 am
Forum: Eurorack Modules
Topic: Post pics of your euro setup!
Replies: 14435
Views: 2742642

Nice one Yloopz!
That's a whole bunch of powerful (but also complex!) modules right there (the ones that I recognize, that is).
Surely you won't be running out of options soon... :tu:
by Hanz
Sat Sep 22, 2018 8:30 am
Forum: Eurorack Modules
Topic: Twigs: Alternate Firmware for Branches
Replies: 44
Views: 6004

Thanks - working for me as well :party: Extreme Noob here too. Just if it helps: -Had some initial issues getting AVRDUDE installed on MacOS High Sierra, followed this guide: http://macappstore.org/avrdude/ -Installed and used AVRFuses using the settings documented on https://github.com/arirusso/twi...
by Hanz
Thu Sep 20, 2018 1:43 am
Forum: Eurorack Modules
Topic: Quantizer with 1v/octave transpose?
Replies: 25
Views: 1552

Doesn't ALM Beast's Chalkboard do this??? Edit, yes apparently it can! No, it can’t. It can only add or substract entire octaves to/from a single input. There’s no further note subdivisions or the option to precision add two separate inputs. I’m afraid that considerably limits this module’s use for...
by Hanz
Thu Jul 05, 2018 12:43 pm
Forum: 5U Format Modules
Topic: My Hordijk custom "complete system"
Replies: 63
Views: 11017

Re: Hjordik system

B-ry wrote:This system is fantastic. Beautiful build and beautiful quality. How long were you on waiting list?

Thank you
Actually - I think I was the first (or second?) customer for a 3-panel system...
by Hanz
Mon May 21, 2018 4:42 pm
Forum: Eurorack Modules
Topic: Shakmat Time Wizard - The ULTIMATE clock divider/multiplier?
Replies: 156
Views: 16129

Are LEDs getting changed for (new) factory built modules?

Go to advanced search