Hey there, there's a new MU version v3b to further simplify the DIY experience. Details will follow, but for now: 2 separate PCBs (control board and main board) Pin header / Pin sockets eliminate the need for cables and crimping Push Button illumination can now be configured via Jumper (on/off) Impr...

Email/PM sent!

Julien answered my email, he suggested to verify the values of R310, R311 and R312 an the resonance pot.

Resistors color codes are correct, I‘ll measure the resistance of the pot next.

Very cool, EOTS/Martin! :tu: Thanks KSS! In my build, the VCF calibration gives me some trouble. In the calibration guide, steps 1-3 work perfectly. In step 4.1, my emphasis starts at 9 (not 7,5) with the trimmer in mid position, and with the trimmer at max I get to 8 at best. Also in step 4.2, 440...

Hey there, in case this is of use to someone else, I've created a version of the soldering guide where it is possible to switch the silkscreen between references and values. Try it out at https://martinjankoehler.github.io/MME/AnalogBoard-sg.html https://user-images.githubusercontent.com/29398377/10...

btw. out of all the Plaits versions I have seen in both Eurorack and 5U, ( and buchla), this is by far the nicest looking. a real pleasure to have in my rack.

Thanks!

Hi! If you have the double LED issue you'll need to to the calibration procedure: https://mutable-instruments.net/modules/plaits/manual/ (almost at the end of the page) It's simply done by pressing both buttons send 1V (or C2 note) press any button send 3V (or C4 note) press any button Best regards,...

Paradigm X wrote: ↑

Mon Jun 08, 2020 8:15 am

wow, not finished or even started the macro oscillator yet (got sidetracked withthe covid business) but this also looks really cool will there be a motm panel design or just MU? thanks

Thanks!

I'm not 100% sure about MOTM yet, but I think I'll do it.
But first the MU version will be completed…

Hello Brian, I just a question regarding the audio wiring connection. First off you specify a COAX wire, is this to cut down on noise in the audio channel? Yes. With that though, it appears that maybe you have the core wire going to one pin and the shield going to an adjacent pin. Is this correct? A...

Awesome folks! Have been working hard on the module the last weeks, a lot of firmware was been rewritten from scratch. Quantizer feature is not yet implemented, just a bit of display rendering code. More relaxed one playing with it in a more subtle way: http://youtu.be/UPz7cbDUG0A Going more havoc: ...

Awesome, good to hear!

Hey folks! Following my "Plaits" port ( https://www.muffwiggler.com/forum/viewtopic.php?f=24&t=224200 ), and my prototype "Stochastic Marvels" ( https://www.muffwiggler.com/forum/viewtopic.php?f=17&t=229760 ), I have been busy working on a second prototype, "Dual Dynamics Gate". It's based on the Eu...

Hey folks! Following my "Plaits" port ( https://www.muffwiggler.com/forum/viewtopic.php?f=17&t=216177 ), and my prototype "Stochastic Marvels" ( https://www.muffwiggler.com/forum/viewtopic.php?f=17&t=229760 ), I have been busy working on a second prototype, "Dual Dynamics Gate". It's based on the Eu...

I just took a look at your Macro Oscillator and the combination of with the daughterboard sounds great. Thanks! Another quick question: On Marbles it is possible to program a weighted scale with the weight influencing the behaviour of the STEPS knob thinning out the scale - will this also be possib...

@Thorsday: thanks! @hamildad: Thanks about Plaits, good to hear the build was successful! About Marvels, actually it's even 5U wide ;-) But it will also add an extremly powerful quantizer, which also can be used directly. @kindredlost: Good to know! Haven't used TM yet. The behaviour could be fine t...

FYI, due to a couple of questions: DIY kits in MU and MOTM are still available

Thorsday wrote: ↑

Sun Apr 05, 2020 6:40 pm

Breathtaking.

Thank you!

I take it this is not a conversion from a Mutable PCB.

The PCBs and Front Panel were designed from scratch,
schematics and source code will be partially reused.

tele_player wrote: ↑

Sun Apr 05, 2020 4:23 pm

Will the source code be available?

Yes!

Yes, multiple PCBs, a presoldered custom MCU daughterboard and the MU panel with the same look as the „Macro Oscillator“

I thought exactly the same. It took me almost a day to read the complete manual and to understand the whole feature set. So like with my Plaits port, I replaced the somewhat cryptic icons with text and got rid of all the hidden states, where a pushbutton acts like a modifier (ALT, CTRL, SHIFT, ...) ...

Thank you!

:love: It looks great!!! Thank you! The added features are very sensible and make it seem like its own module rather than a 5u panel in front of a Eurorack pcb. I've redesigned the PCBs completely from scratch, only parts of the schematics are taken from "Marbles". All done in a zero fly-wires styl...

Hey folks! Following my "Plaits" port ( https://www.muffwiggler.com/forum/viewtopic.php?f=17&t=216177 ) I have been busy working on my next module "Stochastic Marvels". It's based on the Eurorack module "Marbles" originally developed by "Mutable Instruments", but has a lot of added features - stream...

Hey folks! Following my "Plaits" port ( https://www.muffwiggler.com/forum/viewtopic.php?f=24&t=224200 ) I have been busy working on my next module "Stochastic Marvels". It's based on the Eurorack module "Marbles" originally developed by "Mutable Instruments", but has a lot of added features - stream...

Paradigm X wrote: ↑

Mon Feb 24, 2020 2:03 pm

btw... small error in the MOTM builders guide/BOM

"Audio Output" connectors are detailed as MTA156 in column 3 but MTA100 in column 7. its clear anyway just thought id mention.

Thanks for reporting Ben, I'll include this in the next BOM update.