Search found 866 matches

by kay_k
Mon Apr 12, 2021 4:56 am
Forum: Music Tech DIY
Topic: TL072cpwr Out of stock untill 2022 ?
Replies: 21
Views: 572

Re: TL072cpwr Out of stock untill 2022 ?

You may try to use OPA1678IDGKR. They are better than TL072 and available. Only drawback is VSSOP package. Also 0.65mm between pins but case is 5mm wide instead 6.5mm in TSSOP. You may check pcb if it fits into footprint. https://eu.mouser.com/ProductDetail/Texas-Instruments/OPA1678IDGKR?qs=Mv7BduZ...
by kay_k
Sun Apr 11, 2021 7:24 am
Forum: Eurorack Modules
Topic: LPZW.modules TRAM8 MIDI Converter
Replies: 50
Views: 3924

Re: LPZW.modules TRAM8 MIDI Converter

I have an Analog Rytm and I've been looking for a midi to cv converter and I think this is exactly what I need! I don't think anybody has mentioned the AR but if it was made for the Octatrack and Digitakt, it must be perfect for the AR as well. I read the manual and I just wanted to ask if it's pos...
by kay_k
Sun Apr 11, 2021 7:20 am
Forum: Eurorack Modules
Topic: Mutes you can queue
Replies: 19
Views: 792

Re: Mutes you can queue

Yes, within 6 months for sure!

Also - Schneiders don't charge your CC who they can't deliver. If it takes very long the even ask if you are still interested and you can cancel before they deliver.
by kay_k
Wed Mar 31, 2021 12:17 pm
Forum: Eurorack Modules
Topic: Grids output is all or nothing.
Replies: 8
Views: 371

Re: Grids output is all or nothing.

kay_k wrote:
Fri Mar 26, 2021 3:07 am
how does it react to CV for that channel?
this is essential to know for me helping you ..
by kay_k
Fri Mar 26, 2021 7:52 am
Forum: Eurorack Modules
Topic: Envelope Generators
Replies: 51
Views: 2237

Re: Envelope Generators

A-140-2
by kay_k
Fri Mar 26, 2021 3:07 am
Forum: Eurorack Modules
Topic: Grids output is all or nothing.
Replies: 8
Views: 371

Re: Grids output is all or nothing.

how does it react to CV for that channel?
by kay_k
Sat Mar 20, 2021 5:39 am
Forum: Eurorack Modules
Topic: LPZW.modules EC-MUTE
Replies: 20
Views: 1022

Re: LPZW.modules EC-MUTE

Can you also explain how I'd use Link pins with a footswitch?? What do those pins accept 5-10V triggers? Link is actually just one pin parallel to the group button.. all you need to do is connect Pin2 of the link connector to GND (pin1) you need to find a footswich that is normal open (sadly I thin...
by kay_k
Sat Mar 20, 2021 5:34 am
Forum: Eurorack Modules
Topic: LPZW.modules EC-MUTE
Replies: 20
Views: 1022

Re: LPZW.modules EC-MUTE

I understand, I will mult my clock to both modules. One other point, with the cables between the module matching the photo (and the red lines on either end), it appears the order of the outputs is reversed. (from bottom to top of EC-MUTE) - EC-MUTE button 6 mutes EC2 out 3 - EC-MUTE button 5 mutes ...
by kay_k
Fri Mar 19, 2021 12:31 pm
Forum: Eurorack Modules
Topic: LPZW.modules EC-MUTE
Replies: 20
Views: 1022

Re: LPZW.modules EC-MUTE

This is actually an advanced topic: if you want EC-Mute to pass clock to you need some soldering skills .. there is a separate clock & reset header on EC-Mute that you connect to the normal pins of EC (which has no header for that sadly). If you don't want to do this patching externally is the only ...
by kay_k
Fri Mar 19, 2021 10:50 am
Forum: Eurorack Modules
Topic: NE Desmodus Versio
Replies: 228
Views: 18422

Re: NE Desmodus Versio

Yeah, I can see the price being an issue. Oversynth charges $35 for their overlays...! Maybe aluminum or PCB panels with holes big enough to slide over the knobs and jacks, and a layer of felt on the back to prevent it from scratching the real panel? It seems ridiculous that such a thing would be c...
by kay_k
Fri Mar 19, 2021 9:53 am
Forum: Eurorack Modules
Topic: NE Desmodus Versio
Replies: 228
Views: 18422

Re: NE Desmodus Versio

I could do PCB based ones .. should be around US$ 1 production cost when I make 50 per kind. I think I wouldn't be able to make it so accurate it would cover the jack markings but they are actually quite logical anyway. I would make them like 1mm thick and so that they are held by one of the top cas...
by kay_k
Fri Mar 19, 2021 2:54 am
Forum: Eurorack Modules
Topic: NE Desmodus Versio
Replies: 228
Views: 18422

Re: NE Desmodus Versio

someone should make little plastic snap in overlays for the module.
I'd be more inclined to use another firmware then.
by kay_k
Mon Mar 15, 2021 2:07 am
Forum: Eurorack Modules
Topic: Accurately switching 1v/oct signals?
Replies: 8
Views: 369

Re: Accurately switching 1v/oct signals?

Hi, the Schleußig is 100% I/O buffered, but I am not using precision resistors or ultra-low offset opamps, so you might not get perfect tracking or a slight jump in pitch when switching between Input and alternate Input (worst case maybe 20-40cents). Also the Schleußig has no gated switching, only m...
by kay_k
Tue Mar 09, 2021 3:30 am
Forum: Eurorack Modules
Topic: Mutes you can queue
Replies: 19
Views: 792

Re: Mutes you can queue

Luckily found one of these on Reverb this morning as seems to be out of stock everywhere else. Saw that last night and hesitated. This morning it’s gone and now I know why lol! I’m sure more will turn up eventually. Enjoy it! :) Hi, I am sorry that I am very slow in making them. The good people at ...
by kay_k
Thu Feb 25, 2021 3:24 am
Forum: Eurorack Modules
Topic: NE Desmodus Versio
Replies: 228
Views: 18422

Re: NE Desmodus Versio

If you come from a mixer with normal line level the ducking will not happen cos the level is too low. You need to boost the audio.
I have the same problem here, using a Lollipop Compressor module to boost (and shape) before DV
by kay_k
Tue Feb 23, 2021 12:14 pm
Forum: Eurorack Modules
Topic: Thanks for the idea (3.5mm patch bay)
Replies: 39
Views: 4001

Re: Thanks for the idea (3.5mm patch bay)

Mazzatron just released this... 8HP, 1/8" on front (8 jacks) and 1/4" on back (8 jacks): https://www.mazzatron.com/product-page/patchbay-1-8-1-4-eurorack-module sadly passive .. I'd get an active version Why would this need to be active? boost & attenuation to "normal" studio levels. I would love 4...
by kay_k
Tue Feb 23, 2021 8:26 am
Forum: Eurorack Modules
Topic: Thanks for the idea (3.5mm patch bay)
Replies: 39
Views: 4001

Re: Thanks for the idea (3.5mm patch bay)

circuitburst wrote:
Thu Dec 24, 2020 10:09 am
Mazzatron just released this... 8HP, 1/8" on front (8 jacks) and 1/4" on back (8 jacks):
https://www.mazzatron.com/product-page/ ... ack-module
sadly passive .. I'd get an active version
by kay_k
Sat Jan 30, 2021 6:28 pm
Forum: Eurorack Modules
Topic: Where do you put your "misfit" modules?
Replies: 77
Views: 2339

Re: Where do you put your "junk" modules?

In a spare 3U "skiff" often I find that skiff starts to look like a usable system. I now have multiple of these :omg:
by kay_k
Tue Jan 19, 2021 2:44 pm
Forum: Eurorack Modules
Topic: LPZW.modules EC-MUTE
Replies: 20
Views: 1022

Re: LPZW.modules EC-MUTE

Now available to order at Schneiders .. the real stock following in a few days

https://schneidersladen.de/en/lpzw-ec-mute
by kay_k
Mon Jan 18, 2021 8:30 am
Forum: Eurorack Modules
Topic: LPZW.modules TRAM8 MIDI Converter
Replies: 50
Views: 3924

Re: LPZW.modules TRAM8 MIDI Converter

Heads up: I uploaded version 1.2 to the Clocks&Random Firmware. One change only: This one stops all clock outs when MIDI stop is received. Which remedies some annoyance with devices that constantly send clock messages like the Octatrack or Novation Circuit. If you prefer the current behaviour: just ...
by kay_k
Sun Jan 03, 2021 1:43 pm
Forum: Eurorack Modules
Topic: Best modules for chords/pads ?
Replies: 43
Views: 2276

Re: Best modules for chords/pads ?

Plinky
by kay_k
Fri Dec 18, 2020 5:22 am
Forum: Eurorack Modules
Topic: Plaits Percussion?
Replies: 29
Views: 1176

Re: Plaits Percussion?

an attenuator would come in handy to scale the sequencer out better to the MODEL input. (I guess) - also for the Harmonics CV (not as crucial - you probably want the whole range there anyway)
by kay_k
Sun Dec 13, 2020 5:38 pm
Forum: Eurorack Modules
Topic: LPZW.modules R.Koch
Replies: 22
Views: 1803

Re: LPZW.modules R.Koch

The beauty of this module is that you will not be forced to buy it. :D I am the only one using it and yes: fuck is this cool .. It is not an every man's utility I know. But for some people (like me) Hex-->Bin conversion is natural. In the moment the firmware is in a state where I am ok to use it but...
by kay_k
Thu Dec 10, 2020 11:36 am
Forum: Eurorack Modules
Topic: Drum Machines for use with a Modular
Replies: 30
Views: 907

Re: Drum Machines for use with a Modular

consider doing drums in the modular .. get a small sequencer like SW16 and for instance PROK modules. A few drum voices under heavy modulation can already fill up a lot of space in a mix.
by kay_k
Tue Dec 08, 2020 4:14 am
Forum: Eurorack Modules
Topic: LPZW.modules EC-MUTE
Replies: 20
Views: 1022

Re: LPZW.modules EC-MUTE

So .. populated PCBs, panels and all parts are here. I assembled the first modules yesterday and they are working: YAY Means I am open for orders. modules can be shipped within this or the next week (depending on how many will be ordered of course). Price will be 150,42€ + German VAT for those who h...

Go to advanced search