Search found 567 matches

by Tonefloat01
Sat Jan 23, 2021 11:33 pm
Forum: Eurorack Modules
Topic: How long do you wait to install a new module?
Replies: 23
Views: 515

Re: How long do you wait to install a new module?

E. When I finally find the extra time to spend with my modular to concentrate and focus on it.
by Tonefloat01
Tue Jan 19, 2021 8:58 am
Forum: Eurorack Modules
Topic: Returned! STOLEN MODULE - Humble Audio Quad Operator
Replies: 35
Views: 2067

Re: Returned! STOLEN MODULE - Humble Audio Quad Operator

maudibe wrote:
Mon Jan 18, 2021 10:30 pm

Happy wiggling, and keep the rig bolted down - or of course, just make it so huge that it can't be lifted (my own solution). :goo:

Excellent advice! :hihi:
by Tonefloat01
Sat Jan 16, 2021 8:48 pm
Forum: Eurorack Modules
Topic: Returned! STOLEN MODULE - Humble Audio Quad Operator
Replies: 35
Views: 2067

Re: STOLEN MODULE - HUmble Audio Quad Operator

Had the same thing happen to me recently with a modular shop sending a module via USPS and it was never delivered to my house but it was signed for according to them but not by me or anyone in my household...it never turned up but the store graciously sent out a replacement which was much appreciated.
by Tonefloat01
Sun Jan 10, 2021 12:21 pm
Forum: Eurorack Modules
Topic: L.A. Circuits
Replies: 12
Views: 1717

Re: L.A. Circuits

dkcg wrote:
Wed Jan 15, 2020 4:04 pm

Yay Devo!

Dammit, you made me sad with reality...
+1
by Tonefloat01
Sat Jan 09, 2021 8:46 pm
Forum: Eurorack Modules
Topic: WM Eloquencer and/or Z8000 sequencer issue
Replies: 4
Views: 114

Re: WM Eloquencer and/or Z8000 sequencer issue

From the Eloquencer 1.3.0 manual:

Clock
Here we can configure the following:

Clock In Mult
(x2 x4 x8 /2 /3 /4 /5 /6 /7 /8 /9 /10 /11 /12 /13 /14 /15 /16)

Clock Out Mult
(x2 /2 /4 /8 /16 / 32)
by Tonefloat01
Fri Jan 08, 2021 8:29 pm
Forum: Eurorack Modules
Topic: Envelope Sequencer / Sequenced Envelopes
Replies: 34
Views: 940

Re: Envelope Sequencer / Sequenced Envelopes

pmarchitect wrote:
Fri Jan 08, 2021 11:45 am

Yes anything is possible with enough rack space / modules / money. Trying to cut down on all those outlays.
Sorry man, just trying to give alternate ideas..
Maybe make the envelopes and trigger them in BitWig and send them to your rack via an expert sleepers device instead?
by Tonefloat01
Fri Jan 08, 2021 10:07 am
Forum: Eurorack Modules
Topic: Envelope Sequencer / Sequenced Envelopes
Replies: 34
Views: 940

Re: Envelope Sequencer / Sequenced Envelopes

You're right. The OP answered their own question: Sequencer CV out into envelope CV in. Any sequencer can do this. It's just a matter wether you have enough sequencer tracks to your disposal. Was thinking the same thing myself.. Pick a sequencer, buy enough envelopes and mults and hit play :hmm: Bu...
by Tonefloat01
Fri Jan 08, 2021 9:58 am
Forum: Eurorack Modules
Topic: Furtherrr Generator vs CSL
Replies: 13
Views: 519

Re: Furtherrr Generator vs CSL

Watch the DivKid demo on the Furthrrr Generator if you haven’t already.. It made me pull the trigger on it because I liked what I heard.
The CS-L sounds great as well and I’m thinking of ditching my Shapeshifter for one this year.
by Tonefloat01
Fri Jan 01, 2021 11:36 am
Forum: Eurorack Modules
Topic: MORDAX : DATA - Now available for pre-order
Replies: 1056
Views: 93571

Re: MORDAX : DATA - Now available for pre-order

wanne wrote:
Fri Dec 25, 2020 10:01 am
i still have from time to time a blank white screen on power up....anyone else ?
Nope, I haven’t experienced this on my module.
Maybe try moving the Mordax to another spot in your case to see if you still experience the issue?
by Tonefloat01
Fri Jan 01, 2021 11:15 am
Forum: Eurorack Modules
Topic: Winter Modular Eloquencer Sequencer
Replies: 1394
Views: 135074

Re: Winter Modular Eloquencer Sequencer

Agreed, the manual for the Eloquencer is pretty thin and devoid of illustrations but all the information is in there. I think that they’re relying too much on users making YouTube videos and such and didn’t think an illustrated manual was a good idea. Winter Modular is not alone in this though becau...
by Tonefloat01
Fri Jan 01, 2021 11:08 am
Forum: Eurorack Modules
Topic: FX AID - multi audio effect module
Replies: 1720
Views: 136452

Re: FX AID - multi audio effect module

Wow, thanks Igorr!
Thanks for adding the new Crusher effect!
Your FX module has become one of my favorites because it is so versatile, sound great, is compact and is well supported!
Happy New Year!
by Tonefloat01
Fri Jan 01, 2021 1:48 am
Forum: Eurorack Modules
Topic: Winter Modular Eloquencer Sequencer
Replies: 1394
Views: 135074

Re: Winter Modular Eloquencer Sequencer

Dude. I really want to like this sequencer, I already almost sold it once. I can't figure out anything on this damn thing. How do I even select the white options on the bottom of the face? It’s on page #5 of the manual. .. Press and Hold down the Function button and then short press or longer press...
by Tonefloat01
Wed Dec 30, 2020 9:26 pm
Forum: Eurorack Modules
Topic: How did you pick your sequencer?
Replies: 185
Views: 7815

Re: How did you pick your sequencer?

Eloquencer for me because I liked the demo videos on YouTube that I watched. It seemed to be enough of a sequencer for what I was looking for at the time and for me and my style of music it’s a perfect fit. The USTA looks interesting in a Buchla 250e way which always looked inviting to me. Additiona...
by Tonefloat01
Wed Dec 30, 2020 6:53 pm
Forum: Eurorack Modules
Topic: New E370 Quad VCO Frimware V1.4
Replies: 25
Views: 1354

Re: New E370 Quad VCO Frimware V1.4

thisoldhouse wrote:
Wed Dec 30, 2020 6:47 pm
maybe you already followed this part of the instructions, but just in case not, def make sure it’s not in linear fm mode

Thanks for the reply!
I did make sure that VCO1 was set to “Expo” in the Frequencies page. :despair:
by Tonefloat01
Wed Dec 30, 2020 6:05 pm
Forum: Eurorack Modules
Topic: New E370 Quad VCO Frimware V1.4
Replies: 25
Views: 1354

Re: New E370 Quad VCO Frimware V1.4

Can I resurrect this thread to ask for some help with calibration in FW1.4? I put in a -1V for the first step followed by 2V for the second step. It accepts the calibration as in range, but the resulting notes are way off, in some cases by two octaves or more (and it's not exactly off as though it ...
by Tonefloat01
Tue Dec 29, 2020 8:39 am
Forum: Eurorack Modules
Topic: New case - how much slack in width is normal?
Replies: 18
Views: 479

Re: New case - how much slack in width is normal?

I don’t have any gaps at all in mine but there are a couple of knurlies that I can’t screw in because holes don’t line up. Not sure if the mismatch is due to the panels on those modules or the case. Every case I’ve ever owned (5 so far..) have always had some sort of extra gap/space when they were ...
by Tonefloat01
Mon Dec 28, 2020 1:00 pm
Forum: Eurorack Modules
Topic: Definitive "how to multitrack record your Eurorack"
Replies: 167
Views: 15915

Re: Definitive "how to multitrack record your Eurorack"

I use Nw2s modules into an Antelope Orion 32+ Connect using DB25. I have no issues with the DB25 as these are permanently connected. This gives me 32 channels in which I have as 16 mono and 8 stereo. This goes through optical thunderbolt into the Mac. Works great. The Antelope is really nice but ha...
by Tonefloat01
Sun Dec 27, 2020 9:32 pm
Forum: Eurorack Modules
Topic: Frap Tools USTA
Replies: 490
Views: 33888

Re: Frap Tools USTA

LOL - I have been finding with Usta, though, that it can be really simple like an old time 16 step analogue sequencer. Then you can get more in depth if you need to. Excellent, just what I needed to hear about this thing ;) Good to know that I can use it as a basic sequencer to start and dive deepe...
by Tonefloat01
Sun Dec 27, 2020 10:51 am
Forum: Eurorack Modules
Topic: 2020 Holiday Waiting Game
Replies: 68
Views: 1850

Re: 2020 Holiday Waiting Game

Ordered a blipblox for my kid off reverb. USPS say that it was delivered to my doorstep at 6:00pm tonight. I’ve been home waiting, and the package was not delivered. Anyone ever experienced this with USPS? Hopefully they sent it to one of my neighbors and will get straightened out... I went through...
by Tonefloat01
Sun Dec 27, 2020 8:41 am
Forum: Eurorack Modules
Topic: Thomann / the sssnake stackcable clones
Replies: 54
Views: 2491

Re: Thomann / the sssnake stackcable clones

And here I was thinking that Behringer was the only company blatantly ripping off other designs for profit...
by Tonefloat01
Sun Dec 27, 2020 8:38 am
Forum: Eurorack Modules
Topic: Noise Engineering Cursus Iteritas Percido
Replies: 20
Views: 2163

Re: Noise Engineering Cursus Iteritas Percido

I already have a BIA, MI, LI and a LIP... Would adding the CIP provide me with anything else? From what I understand it’s the most ‘tame’ or ‘melodic’ of the bunch. I’d say yes, it doesn’t sound like any of those Ah crap, I was afraid that someone would say that... :help: Great work BTW! I really l...
by Tonefloat01
Sat Dec 26, 2020 9:39 pm
Forum: Eurorack Modules
Topic: 2020 Holiday Waiting Game
Replies: 68
Views: 1850

Re: 2020 Holiday Waiting Game

Well, I was awaiting a Doepfer A-111-2V oscillator but it showed up on Christmas Eve which was nice.
Now I’m awaiting an N2WS 16 IO module that’s ‘arriving late’ according to the USPS which sucks.
However, FedEx also biffed a module shipped from England and has to be sent back which sucks even more.
by Tonefloat01
Sat Dec 26, 2020 9:32 pm
Forum: Eurorack Modules
Topic: Noise Engineering Cursus Iteritas Percido
Replies: 20
Views: 2163

Re: Noise Engineering Cursus Iteritas Percido

I already have a BIA, MI, LI and a LIP...
Would adding the CIP provide me with anything else?
From what I understand it’s the most ‘tame’ or ‘melodic’ of the bunch.
by Tonefloat01
Sat Dec 26, 2020 9:19 pm
Forum: Eurorack Modules
Topic: Noise Engineering Cursus Iteritas Percido
Replies: 20
Views: 2163

Re: Noise Engineering Cursus Iteritas Percido

Damn it...
I mustn’t get another NE oscillator...
I mustn’t get another NE oscillator...
I mustn’t get another NE oscillator...
by Tonefloat01
Sat Dec 26, 2020 11:26 am
Forum: Eurorack Modules
Topic: Did anyone start big and no regrets?
Replies: 155
Views: 3929

Re: Did anyone start big and no regrets?

I started relatively big myself filling up a Pittsburgh EP-360 almost in almost one go after researching everything. I have a long history of keyboard synths so having this knowledge helped me from being lost right out of the gate. Definitely different because you have to patch everything up to make...

Go to advanced search