Search found 189 matches

by plainjanefrancis
Tue May 19, 2020 1:24 pm
Forum: Eurorack Modules
Topic: Digital Analog Kicks
Replies: 8
Views: 375

Re: Digital Analog Kicks

Does the DFAM have a VCO hard sync input? If the onboard VCO is free running and you're mixing in with it, a sampled kick drum without removing the low frequencies from the sample, completely, you're bound to get some phase cancellations at random intervals as the DFAM VCO is running free against t...
by plainjanefrancis
Tue May 19, 2020 10:24 am
Forum: Eurorack Modules
Topic: Digital Analog Kicks
Replies: 8
Views: 375

Re: Digital Analog Kicks

There are many threads about analogue kick drums, but this is the only one I am aware of that has an external input: https://www.modulargrid.net/e/steady-state-fate-entity-bass-drum-synthesizer Any reason it has to go into the kick and not alongside it? In the latter case, you could use something l...
by plainjanefrancis
Tue May 19, 2020 8:15 am
Forum: Eurorack Modules
Topic: Digital Analog Kicks
Replies: 8
Views: 375

Digital Analog Kicks

Lately, I've been using my Dfam like the BD of an Elektron Analog Rytm. Meaning, triggering the analog kick from the DFAM while simultaneously running a sampled kick into it's external input. The result is a very satisfying and versatile kick drum. Only thing is, I realize I'm only using the DFAM in...
by plainjanefrancis
Sun May 17, 2020 11:23 am
Forum: Eurorack Modules
Topic: ALM Squid Salmple - 8 channel CV and audio sampler
Replies: 298
Views: 31704

Re: ALM Squid Salmple - 8 channel CV and audio sampler

maybe this has been asked before, not sure, but i see there's an expansion header on the back of Squid salmple, any chance that could be used to normal mmMidi trigger outs to the 8 triggers inputs of the Squid? Would be super cool and convenient :)
by plainjanefrancis
Thu Apr 30, 2020 3:39 pm
Forum: Eurorack Modules
Topic: ALM Busy Circuits MCO
Replies: 26
Views: 3009

Re: ALM Busy Circuits MCO

Has anyone had any luck with the calibration process with this module? I've never been able to get akemie's castle, sid guts deluxe or the mco to track anywhere near as accurate as my DFAM and STO. I'm thinking I might just use the MCO hard synced to the DFAM's oscillator for now. Just curious about...
by plainjanefrancis
Wed Apr 22, 2020 9:10 pm
Forum: Eurorack Modules
Topic: Best eurorack drum sequencer 2020
Replies: 26
Views: 1067

Re: Best eurorack drum sequencer 2020

wow I completely forgot about steppy :doh:
that's the winner in my book. Especially the 1u module.
by plainjanefrancis
Tue Apr 21, 2020 2:39 pm
Forum: Eurorack Modules
Topic: Best eurorack drum sequencer 2020
Replies: 26
Views: 1067

Re: Best eurorack drum sequencer 2020

The best drum sequencers for eurorack are probably not in the rack :sstorm: Like ableton push combined with ES-9 or mmMidi, mutant brain etc. That being said, I'm currently using Frap Tools USTA for all sequencing purposes complimented by pressure points (without brains) and mmMidi + mmT for more te...
by plainjanefrancis
Sun Apr 19, 2020 4:16 pm
Forum: Eurorack Modules
Topic: Been stuck on what to do next for awhile. Any help?
Replies: 25
Views: 801

Re: Been stuck on what to do next for awhile. Any help?

A flagship sequencer could be fun for you. My personal favorite of the ones I've tried over the years is Frap Tools USTA. Alternatively you could also get a simple sequencer and sum it's out with a quantized random source generator for some in tune randomness. It really comes down to what type of wo...
by plainjanefrancis
Thu Apr 16, 2020 5:21 pm
Forum: Eurorack Modules
Topic: Squarp Rample
Replies: 56
Views: 3570

Re: Squarp Rample

How does the CV layer selection work right now? Does just switch with gate signals? It can change itself on the gate trigger in random, cyclic or reverse cyclic mode. Layer can also be selected explicitly with MIDI velocity or CV (-5 to +5 or 0 to +5v from memory). Oh ok nice, so it's possible just...
by plainjanefrancis
Thu Apr 16, 2020 3:22 pm
Forum: Eurorack Modules
Topic: Squarp Rample
Replies: 56
Views: 3570

Re: Squarp Rample

So, I got over my grumpiness and ordered one of these. It arrived today, it's big fun. Squarp were friendliness personified and did really well well to get it out this fast, so I owe them an apology for being salty ;) It really needs a mode where the CV-driven layer selection works as volt/octave, ...
by plainjanefrancis
Sat Apr 11, 2020 3:55 pm
Forum: Eurorack Modules
Topic: Frap Tools USTA
Replies: 232
Views: 16407

Re: Frap Tools USTA

Looks like a new firmware was released today :)
152
http://frap.tools/firmwares/
by plainjanefrancis
Thu Apr 09, 2020 6:34 pm
Forum: Eurorack Modules
Topic: What's in your 4U Palette?
Replies: 62
Views: 5695

Re: What's in your 4U Palette?

ATW wrote:
Thu Apr 09, 2020 4:50 pm
Looks like some nice audio mangling is on deck. And the black & gold & silver play well together here. HWhat is the module furthest to the left w/ the clear knob?

Cheers
looks like the qu-bit nano rand.
by plainjanefrancis
Tue Mar 24, 2020 10:15 am
Forum: Eurorack Modules
Topic: clocking Pamelas New workout
Replies: 5
Views: 376

Re: clocking Pamalas New workout

Hey all , I know this exists somewhere out there but I couldn't find it in the search. If I want to clock Pamalas New workout with my marbles what PPQN should I choose? can I get reliable sync this way? I've had trouble in the past, getting stability, when attempting to slave Pamalas to something e...
by plainjanefrancis
Mon Mar 23, 2020 8:40 pm
Forum: Eurorack Modules
Topic: emitum thin and clean power case!
Replies: 27
Views: 2927

Re: emitum thin and clean power case!

I have this case its very good. The power I was concerned about but Jason at Signal Sounds contacted the guy who makes them and was told the real upper limit is 1700 not the advertised 1200 +12 I guess maybe it's less efficient past 1200? No idea. But I have been running it at about 1500 for a coup...
by plainjanefrancis
Mon Mar 23, 2020 3:22 pm
Forum: Eurorack Modules
Topic: emitum thin and clean power case!
Replies: 27
Views: 2927

Re: emitum thin and clean power case!

This case looks super nice. I'm a little disappointed about the power, however. It provides the same amount of power as 1 Intellijel Palette case. If I were to move from my two palette cases to this one, I'd still be over the power limit (not including my 1U rows) Now I'm trying to figure out if I s...
by plainjanefrancis
Mon Mar 23, 2020 3:21 pm
Forum: Eurorack Modules
Topic: emitum thin and clean power case!
Replies: 27
Views: 2927

Re: emitum thin and clean power case!

This case looks super nice. I'm a little disappointed about the power, however. It provides the same amount of power as 1 Intellijel Palette case. If I were to move from my two palette cases to this one, I'd still be over the power limit (not including my 1U rows) Now I'm trying to figure out if I s...
by plainjanefrancis
Mon Mar 23, 2020 7:55 am
Forum: Eurorack Modules
Topic: ALM Squid Salmple - 8 channel CV and audio sampler
Replies: 298
Views: 31704

Re: ALM Squid Salmple - 8 channel CV and audio sampler

Just tested it again, I can only get settings for a bank to save cv settings by copying from channel one and then cycling the power. Im not having much luck replicating this. Could you email specific step to help at busycircuits ... a video would be really useful too if pos. I was going to make a v...
by plainjanefrancis
Sun Mar 22, 2020 11:27 am
Forum: Eurorack Modules
Topic: ALM Squid Salmple - 8 channel CV and audio sampler
Replies: 298
Views: 31704

Re: ALM Squid Salmple - 8 channel CV and audio sampler

The only issue I'm running into with the 121-beta firmware is the ability to save cv parameters. I've set up a bank to work like the live looper demonstrated in the first Deep Dive video. But when saving the entire bank, or each channel individually, it doesn't save the loop setting and attack sett...
by plainjanefrancis
Sat Mar 21, 2020 2:24 pm
Forum: Eurorack Modules
Topic: ALM Squid Salmple - 8 channel CV and audio sampler
Replies: 298
Views: 31704

Re: ALM Squid Salmple - 8 channel CV and audio sampler

The only issue I'm running into with the 121-beta firmware is the ability to save cv parameters. I've set up a bank to work like the live looper demonstrated in the first Deep Dive video. But when saving the entire bank, or each channel individually, it doesn't save the loop setting and attack setti...
by plainjanefrancis
Thu Mar 19, 2020 7:51 pm
Forum: Eurorack Modules
Topic: New! Alright Devices Zzzorb
Replies: 28
Views: 1879

Re: New! Alright Devices Zzzorb

adorable <3
by plainjanefrancis
Sat Mar 14, 2020 6:33 am
Forum: Eurorack Modules
Topic: Instruo Lúbadh stereo looper
Replies: 286
Views: 25804

Re: Instruo Lúbadh stereo looper

cyclyk wrote:
Sat Mar 14, 2020 2:35 am
An update is available..
https://www.instruomodular.com/support/
oooh can't wait to try out the jump to speed feature.
by plainjanefrancis
Thu Mar 12, 2020 3:04 am
Forum: Eurorack Modules
Topic: MyVolts Ripcord
Replies: 10
Views: 1071

Re: MyVolts Ripcord

Hi plainjanefrancis Please can you try the dc out of your Omni into the input of the Intellijel? I have a similar 15V power supply on my Eurorack and would love to know if it works and also how long for? Any feedback appreciated Thanks! Sorry I'm just now seeing this! I don't have the correct cable...
by plainjanefrancis
Fri Mar 06, 2020 12:30 pm
Forum: Eurorack Modules
Topic: Endorphin.es Grand Terminal
Replies: 16
Views: 1550

Re: Endorphin.es Grand Terminal

Any chance, someone has a .FPD file for a Buchla style Grand Terminal panel? The Furthrrrr Generator and Terminal panels designed by mritenburg look really nice.
by plainjanefrancis
Thu Mar 05, 2020 10:19 pm
Forum: Eurorack Modules
Topic: Instruo Lúbadh stereo looper
Replies: 286
Views: 25804

Re: Instruo Lúbadh stereo looper

Running into a little problem that i'm sure can be fixed with an update. When I'm sending modulation signals to the expander, sometimes the Lubadh freezes up and just erases both loops. I'm not putting anything into the erase inputs of the expander. This has happened maybe 5 times in the past two d...

Go to advanced search